Welcome to our new forum
All users of the legacy CODESYS Forums, please create a new account at account.codesys.com. But make sure to use the same E-Mail address as in the old Forum. Then your posts will be matched.
Close
I have modbus network with 15 DC inverters.
The problem is that from time to time i get error and timeout (byModbusError - 163).
Some time i get it from first drive, and other time from second, forth etc. There is no rule.
For each inverter i set:
a. timeout - 5000ms
b. send 2 registers per 400 ms
c. receive 3 registers per 100ms
Baud rate of network 19200,8,1, and 5 ms as delay between frames (in PLC and in DC inverters).
In attachment i am sending my settings one of DC inverters
Do you have any idea where the problem is?
Lukasz
If you would like to refer to this comment somewhere else in this project, copy and paste the following link:
Hello,
I have modbus network with 15 DC inverters.
The problem is that from time to time i get error and timeout (byModbusError - 163).
Some time i get it from first drive, and other time from second, forth etc. There is no rule.
For each inverter i set:
a. timeout - 5000ms
b. send 2 registers per 400 ms
c. receive 3 registers per 100ms
Baud rate of network 19200,8,1, and 5 ms as delay between frames (in PLC and in DC inverters).
In attachment i am sending my settings one of DC inverters
Do you have any idea where the problem is?
Lukasz