Welcome to our new forum
All users of the legacy CODESYS Forums, please create a new account at account.codesys.com. But make sure to use the same E-Mail address as in the old Forum. Then your posts will be matched.
Close
We have configured our board as modbus COM Port Master and our I/O devices as COM Port slaves. So we have data as tags read by com port master and now we want to forward those data to an uplink network like SCADA through modbus protocol , configuring our Board as TCP slave and SCADA as TCP master . For that we need to link COM port master data with TCP Slave. and it keeps showing yellow triangle on tcp slave, what does that mean and how to configure it?
If you would like to refer to this comment somewhere else in this project, copy and paste the following link:
We have configured our board as modbus COM Port Master and our I/O devices as COM Port slaves. So we have data as tags read by com port master and now we want to forward those data to an uplink network like SCADA through modbus protocol , configuring our Board as TCP slave and SCADA as TCP master . For that we need to link COM port master data with TCP Slave. and it keeps showing yellow triangle on tcp slave, what does that mean and how to configure it?