Welcome to our new forum
All users of the legacy CODESYS Forums, please create a new account at account.codesys.com. But make sure to use the same E-Mail address as in the old Forum. Then your posts will be matched.
Close
I would like to test, if my slave ECU (B&R X20IF1043-1) is configured correctly on the CANBus (CANOpen). Luckily, I have the Codesys-Project from the Master (Topcon Opus A3), however, I don't have the master hardware.
Is there a way to connect the hardware of the slave (B&R X20IF1043-1) to the Codesys Master Project (Maybe using the PCAN USB)? So that I can see the input coming from the slave, if I simulate the Master Project in Codesys?
Dear Colleagues,
I would like to test, if my slave ECU (B&R X20IF1043-1) is configured correctly on the CANBus (CANOpen). Luckily, I have the Codesys-Project from the Master (Topcon Opus A3), however, I don't have the master hardware.
Is there a way to connect the hardware of the slave (B&R X20IF1043-1) to the Codesys Master Project (Maybe using the PCAN USB)? So that I can see the input coming from the slave, if I simulate the Master Project in Codesys?
Thank you for your reply!
The links for the B&R Slave and PCAN-USB:
https://www.br-automation.com/de-at/produkte/steuerungssysteme/x20-system/kommunikation-im-x20-schnittstellenmodul/x20if1043-1/?noredirect=1
https://www.peak-system.com/PCAN-USB.199.0.html?&L=1