Welcome to our new forum
All users of the legacy CODESYS Forums, please create a new account at account.codesys.com. But make sure to use the same E-Mail address as in the old Forum. Then your posts will be matched.
Close
Maybe someone can help me in this case.
Im working with codesys 3.5 with an PFC200 (750-8212) with a Modbus TCP conection to the 750-362.
On the 750-362 i have a 4DO, 8DI and a RS485 interface card. the 4DO and 8DI cards a working fine but im strugling with the rs485 card.
Forgot to describe the pictures.
Modbus1: is the actual configuration in codesys 3.5
Modbus2: is the config in WAGO I/O
Modbus3: is the configuration from the old one with Beckhoff twincat (we are changing from Beckhoff to wago and codesys)
If you would like to refer to this comment somewhere else in this project, copy and paste the following link:
hi guys
Maybe someone can help me in this case.
Im working with codesys 3.5 with an PFC200 (750-8212) with a Modbus TCP conection to the 750-362.
On the 750-362 i have a 4DO, 8DI and a RS485 interface card. the 4DO and 8DI cards a working fine but im strugling with the rs485 card.
Does someone have a example for this?
Forgot to describe the pictures.
Modbus1: is the actual configuration in codesys 3.5
Modbus2: is the config in WAGO I/O
Modbus3: is the configuration from the old one with Beckhoff twincat (we are changing from Beckhoff to wago and codesys)