Welcome to our new forum
All users of the legacy CODESYS Forums, please create a new account at account.codesys.com. But make sure to use the same E-Mail address as in the old Forum. Then your posts will be matched.
Close
I would like to disable inputs and outputs one at a time.
example:
I am using the RS function block, to disable some alarms (digital inputs), via a pulse button. But I wanted to disable one input at a time, because that way it only disables all inputs, and if there is another alarm, the sirene (digital output) is disabled forever.
I am using the WAGO version 1.6 e! Cockpit platform CODESYS V3
My name is Rafael, and I'm from Brazil. Thanks for listening.
Good afternoon!!
I would like to disable inputs and outputs one at a time.
example:
I am using the RS function block, to disable some alarms (digital inputs), via a pulse button. But I wanted to disable one input at a time, because that way it only disables all inputs, and if there is another alarm, the sirene (digital output) is disabled forever.
I am using the WAGO version 1.6 e! Cockpit platform CODESYS V3
My name is Rafael, and I'm from Brazil. Thanks for listening.