Could anyone recommend a manual to follow up in order to achieve serial communication through RS232 between a PLC and a meter? the project is to receive information from the meter only, as meter flow or real-time value. I have spoken to the company of the meter and they gave me a manual to address every byte. But I cannot achieve the communication between those devices
Many thanks,
Manuel
If you would like to refer to this comment somewhere else in this project, copy and paste the following link:
Hello everyone,
Could anyone recommend a manual to follow up in order to achieve serial communication through RS232 between a PLC and a meter? the project is to receive information from the meter only, as meter flow or real-time value. I have spoken to the company of the meter and they gave me a manual to address every byte. But I cannot achieve the communication between those devices
Many thanks,
Manuel
Hi Manuel,
which plc in which version, there is an store example for serial com.
Too less information on your post.
https://store.codesys.com/serial-com.html
BR
Edwin
Hi Edwin,
Thank you very much for your reply.
I am working with a CR0303 from IFM.
Many thanks,
Manuel