Welcome to our new forum
All users of the legacy CODESYS Forums, please create a new account at account.codesys.com. But make sure to use the same E-Mail address as in the old Forum. Then your posts will be matched.
Close
By browser is not working. Tim suggestet to use Codesys and stick in the laptop. Thats working. But now with a stick with licence but no running motion.
most important information are missing:
Which CODESYS Version?
Which runtime version?
Which plc type (manufacturere)..
Not all plc manufacturer already support application based licenses.
From your pictures I see you have activated 4 axis Motion (which is an applications based license type)
does only work on plc's which do support this.
If you would like to refer to this comment somewhere else in this project, copy and paste the following link:
16.4 Epis What has it to do with the manufacture? It just a licence more not. So basicly the idee of codesys sucks. 3s acts like its posible to add a license. And then it depence on the manufacturer. Why ?? Its a computer !! has nothing to do with the manufacturer. Most dont what a basic licence because they have to pay for that. 3s is the problem not the manufacture of the hardware. Its like the licence of the raspberry pi. HMI is not working. Sorry you get a refund. Why suggest that its possible wen its not !!. It cost me a lot of time. Who pays my time. Why do i have to pay for somting thats not working.
If you would like to refer to this comment somewhere else in this project, copy and paste the following link:
I just try to help.
Anyway it is a big difference if a Store SL runtime or an oem plc and licence is used. These licenses need to be activated on plc side - so you have dependencies to the version (CODESYS and Runtime Version) Did you ever ask Epis out for this situation? They should know which license fit to their device. Even they should know if the device is capable for Softmotion and see the requiremnts in the CODESYS store: Runtime 4.9.0.0 - how should this work with Epis 3.5.16.x? Anyway refund is not a problem.
Hi, I want to activate a license. But got an error. This gateway endpoint is inactive
as a workaround just plug your USB key to the CODESYS PC - and activate the ticket by the browser
license.codesys.com
It doesnt see the dongel on my computer
Is this a computer with installed CODESYS ?
Codemeter is needed to activate licenses via Browser...
By browser is not working. Tim suggestet to use Codesys and stick in the laptop. Thats working. But now with a stick with licence but no running motion.
most important information are missing:
Which CODESYS Version?
Which runtime version?
Which plc type (manufacturere)..
Not all plc manufacturer already support application based licenses.
From your pictures I see you have activated 4 axis Motion (which is an applications based license type)
does only work on plc's which do support this.
16.4 Epis What has it to do with the manufacture? It just a licence more not. So basicly the idee of codesys sucks. 3s acts like its posible to add a license. And then it depence on the manufacturer. Why ?? Its a computer !! has nothing to do with the manufacturer. Most dont what a basic licence because they have to pay for that. 3s is the problem not the manufacture of the hardware. Its like the licence of the raspberry pi. HMI is not working. Sorry you get a refund. Why suggest that its possible wen its not !!. It cost me a lot of time. Who pays my time. Why do i have to pay for somting thats not working.
I just try to help.
Anyway it is a big difference if a Store SL runtime or an oem plc and licence is used. These licenses need to be activated on plc side - so you have dependencies to the version (CODESYS and Runtime Version) Did you ever ask Epis out for this situation? They should know which license fit to their device. Even they should know if the device is capable for Softmotion and see the requiremnts in the CODESYS store: Runtime 4.9.0.0 - how should this work with Epis 3.5.16.x? Anyway refund is not a problem.
Last edit: eschwellinger 16 hours ago