CODESYS Forge - CODESYS Forge / Talk / Engineering 🇬🇧: CAN OPEN Master via Hilscher CIFX card

CAN OPEN Master via Hilscher CIFX card

Forum: Engineering 🇬🇧

Creator: HeroLin

Created: 2015-01-16

Updated: 2015-01-17

HeroLin - 2015-01-16

Hi :

May some one help me how to fine tune the CODESYScontrol.cfg ?
I have a project that CODESY RTE V3 talk with WAGO 750-337 CAN OPEN I/O via Hilscher CIFX card .
The role of CIFX card is CAN OPEN Master .

BR

Hero Lin

If you would like to refer to this comment somewhere else in this project, copy and paste the following link:

eschwellinger - 2015-01-16

Hi,

Example for RTE config file,

[ComponentManager]
Component.1=CmpDrvSchedulerAPIC
Component.2=CmpHilscherCIFX
Component.3=CmpNetXCanDlDrv
;Component.2=CmpSJACanDrv
;Component.2=CmpEt100Drv
;Component.2=CmpEt1000Drv
;Component.2=CmpRTL81x9Mpd
;Component.2=CmpRTL8169Mpd

sure the lower part in that file with firmware download to the cifx card is mandatory to (remove the ; and adapt to the correct firmware)

BR
Edwin

If you would like to refer to this comment somewhere else in this project, copy and paste the following link:

HeroLin - 2015-01-17

it works ,Thanks Edwin .

If you would like to refer to this comment somewhere else in this project, copy and paste the following link:

Log in to post a comment.