Welcome to our new forum
All users of the legacy CODESYS Forums, please create a new account at account.codesys.com. But make sure to use the same E-Mail address as in the old Forum. Then your posts will be matched.
Close
Has anyone interfaced DM1 with Codesys Alarm Management? For "known"/handled DTC (i.e. most common ones) a separate path is viable, but for obscure/very infrequent ones just showing an alarm with SPN and FMI is fine for my application.
However, I cannot directly use DM1_Read DTC list because in case there are two active DTC, and the first goes inactive, the second takes the first place in the array and so screws the alarm handling.
If you would like to refer to this comment somewhere else in this project, copy and paste the following link:
Has anyone interfaced DM1 with Codesys Alarm Management? For "known"/handled DTC (i.e. most common ones) a separate path is viable, but for obscure/very infrequent ones just showing an alarm with SPN and FMI is fine for my application.
However, I cannot directly use DM1_Read DTC list because in case there are two active DTC, and the first goes inactive, the second takes the first place in the array and so screws the alarm handling.