Welcome to our new forum
All users of the legacy CODESYS Forums, please create a new account at account.codesys.com. But make sure to use the same E-Mail address as in the old Forum. Then your posts will be matched.
Close
I am developing OPC UA client for Control Win V3, and have faced with the incomplete OPC UA specification realization. Particular i found, that functionality of MonitoredItem DataChangeFilter Trigger is limited by "StatusValue_1", and "StatusValueTimestamp_2" mode would not be accepted by server. This resulted in inability to retrieve the data in every scan cycle (data is being delivered upon value change), and will require some undesired workaround. My OPC UA client is working normally with another Servers though.
This OPC Server v3 behavior was checked on UaExpert with the same result.
Could OPC Server functionality be limited because of Demo mode? And if not β any plans to rectify this in future?
OS:Windows10x64bit
CODESYS Control WinV3 3.5.7.20 (Demo)
If you would like to refer to this comment somewhere else in this project, copy and paste the following link:
I am developing OPC UA client for Control Win V3, and have faced with the incomplete OPC UA specification realization. Particular i found, that functionality of MonitoredItem DataChangeFilter Trigger is limited by "StatusValue_1", and "StatusValueTimestamp_2" mode would not be accepted by server. This resulted in inability to retrieve the data in every scan cycle (data is being delivered upon value change), and will require some undesired workaround. My OPC UA client is working normally with another Servers though.
This OPC Server v3 behavior was checked on UaExpert with the same result.
Could OPC Server functionality be limited because of Demo mode? And if not β any plans to rectify this in future?
OS:Windows10x64bit
CODESYS Control WinV3 3.5.7.20 (Demo)
Hi,
need some time to check.
This is an open issue need to be solved
OPC UA: Support of "Embedded UA Server Profile"
BR
Edwin