Hello Guys,i have a question, i need to appear an image on my visualisation according to my input signal :is i get input-1 so the image will appear .can someone guide me .
Thanks
If you would like to refer to this comment somewhere else in this project, copy and paste the following link:
Good afternoon. You can set your invisibility property to an expression. For example, in this visualization, the image will only be visible when PLC_PRG.p is not equal to 1.ng width=50%]]. This property is below the State variables in the properties tab. I hope this helps!
Hello, It's related to same topic, so I'm adding a comment on it; Hope it's ok.
I need an additionnal info.
considering my variable on 1 BYTE, and any bit has his own img.
Doing above method will need to add all pics to the vizualization and hide each of them manually?
Do there is a way to attach the whole ImagePool to 1pics and attach the variable to IMG. ID?
or somethings similar?
Hello, It's related to same topic, so I'm adding a comment on it; Hope it's ok.
I need an additionnal info.
considering my variable on 1 BYTE, and any bit has his own img.
Doing above method will need to add all pics to the vizualization and hide each of them manually?
Do there is a way to attach the whole ImagePool to 1pics and attach the variable to IMG. ID?
or somethings similar?
Regards
If you would like to refer to this comment somewhere else in this project, copy and paste the following link:
yes it's possible. the image ID is of type string. So, setting a string var to the name of the needed image works.
the element setting image-ID is set to string var. see attachement
Reopening this thread as I need to make a few images visible depending on the value of a variable.
However, in the properties of the image I do not have the option to make the image visible (see attached image).
I´m using Codesys V3.5 SP19. However, when I use V3.5 SP17 I have the option to make the images visible.
Can someone help me achieve this with V3.5 SP19?
EDIT: Fixed. Just had to uncheck Support client animations in the Visualization manger settings
Hello Guys,i have a question, i need to appear an image on my visualisation according to my input signal :is i get input-1 so the image will appear .can someone guide me .
Thanks
Good afternoon. You can set your invisibility property to an expression. For example, in this visualization, the image will only be visible when PLC_PRG.p is not equal to 1.
ng width=50%]]. This property is below the State variables in the properties tab. I hope this helps!
😁Thanks its work!
Hello, It's related to same topic, so I'm adding a comment on it; Hope it's ok.
I need an additionnal info.
considering my variable on 1 BYTE, and any bit has his own img.
Doing above method will need to add all pics to the vizualization and hide each of them manually?
Do there is a way to attach the whole ImagePool to 1pics and attach the variable to IMG. ID?
or somethings similar?
Regards
Hello, It's related to same topic, so I'm adding a comment on it; Hope it's ok.
I need an additionnal info.
considering my variable on 1 BYTE, and any bit has his own img.
Doing above method will need to add all pics to the vizualization and hide each of them manually?
Do there is a way to attach the whole ImagePool to 1pics and attach the variable to IMG. ID?
or somethings similar?
Regards
yes it's possible. the image ID is of type string. So, setting a string var to the name of the needed image works.
the element setting image-ID is set to string var. see attachement
Last edit: dkugler 2023-08-14
Last edit: dkugler 2023-08-14
greats, thanks you as soon as possible will try and let you know THANK YOU
Hi,
unfortunalty that part, I can't do it?
Don't have the same "setting" on vizualization.
where to get it please?
Regards
To see the image ID variable you need to set the filter in properties to all or animation.
Hi,
unfortunalty that part, I can't do it?
Don't have the same "setting" on vizualization.
where to get it please?
Regards
Hello
thank you to all, it's work
regards
Reopening this thread as I need to make a few images visible depending on the value of a variable.
However, in the properties of the image I do not have the option to make the image visible (see attached image).
I´m using Codesys V3.5 SP19. However, when I use V3.5 SP17 I have the option to make the images visible.
Can someone help me achieve this with V3.5 SP19?
EDIT: Fixed. Just had to uncheck Support client animations in the Visualization manger settings
Last edit: ggarcia94 2023-09-12