Welcome to our new forum
All users of the legacy CODESYS Forums, please create a new account at account.codesys.com. But make sure to use the same E-Mail address as in the old Forum. Then your posts will be matched.
Close
Sometimes, with not apparently reason, the webvisu does'not load.
the plc is in run and it works normaly.
To solve I need to restart PC or "stop" and "start" PLC using codesys controlwin
what can I do?
Thanks, I will check the PLC Log when the PLC is connected again. I will update my findings here.
Since I don't have access to the Linux Panel PC at the moment, I tested inside my development VM with the same Linux OS. I have no issues or delays connecting to the WebVisu using my Linux VM.
Two main differences:
1. My host Computer has a faster processor compared to the panel PC.
2. There are no devices connected in my dev environment.
I will continue testing when I have connection to the panel PC.
If you would like to refer to this comment somewhere else in this project, copy and paste the following link:
I put in a support ticket request for this issue since I need this application to be running reliably for my customer's application. Hope to hear back from support soon to troubleshoot this process.
If you would like to refer to this comment somewhere else in this project, copy and paste the following link:
Sometimes, with not apparently reason, the webvisu does'not load.
the plc is in run and it works normaly.
To solve I need to restart PC or "stop" and "start" PLC using codesys controlwin
what can I do?
more posts ...
which versions is it? (runtime)
I am experiencing something like this as well. After reboot, the WebVisu can take up to 3 min to load.
Device: CODESYS for Linux V4.9.0.0
CODESYS IDE: V3.5 SP19 Patch 1
After loading, it seems to be quite responsive. It's just the initial loading that is taking a long time.
Last edit: aott33 2023-09-21
check the plclogger for this situation
Thanks, I will check the PLC Log when the PLC is connected again. I will update my findings here.
Since I don't have access to the Linux Panel PC at the moment, I tested inside my development VM with the same Linux OS. I have no issues or delays connecting to the WebVisu using my Linux VM.
Two main differences:
1. My host Computer has a faster processor compared to the panel PC.
2. There are no devices connected in my dev environment.
I will continue testing when I have connection to the panel PC.
Should I be looking for anything in particular in the PLC Log? Attached is the xml file from the PLC logger.
I put in a support ticket request for this issue since I need this application to be running reliably for my customer's application. Hope to hear back from support soon to troubleshoot this process.
I will update here for others once I find out the issue.
Last edit: aott33 2023-10-09