Ist es möglich eine Kommunikation zwischen einen Codesys Profinet Controller (Windows 10 Codesys Control Win 64) und Codesys Profinet Device (Windows 7 Codesys Control Win 64) ohne die jeweiligen Lizenzen in Demo Version zu testen. Wo kann man Beispiele finden?
Mit freundlichen Grüßen
Hello everybody,
Is it possible to test a communication between a Codesys Profinet Controller (Windows 10 Codesys Control Win 64) and Codesys Profinet Device (Windows 7 Codesys Control Win 64) without the respective licenses in demo version? Where can I find examples?
Best regards
If you would like to refer to this comment somewhere else in this project, copy and paste the following link:
unfortunately the profinet communication is not working.
I have take the project with 2 raspberry pi.
The part for profinet Controller I have loaded to Rasbery Pi (Bild 1-4).
The part for profinet device I have loaded to Codesys Control Win X64 (Bild 5-7)(I have also a Codesys Profinet Device License on The Codesys Runtime key which is insertet to the Win 7 PC).
Can you please tell me any sugestion what I m doing wrong.
Do I have to do something with the license for Codesys Profinet Device on the Codesys Runtime Key or it is enough just to plug in the PC.
Best regards
If you would like to refer to this comment somewhere else in this project, copy and paste the following link:
Usually, when you declare a PN device with 8 in, 64 in/out, 8 out you have to declare the controler symetrically, communication wise. So 8 out, 64 in/out, 8 in.
I don't know if this apply for codesys, but in siemens softs, it does.
If you would like to refer to this comment somewhere else in this project, copy and paste the following link:
Hi,
winpcap is installed? ( this is mandatory for Control Win)
For a test I would recommend to disable the firewall
then try to scan the pn device from the pn controller application.
Send/attach the screenshots and plclogger of that.
BR
Edwin
If you would like to refer to this comment somewhere else in this project, copy and paste the following link:
Hallo zusammen,
Ist es möglich eine Kommunikation zwischen einen Codesys Profinet Controller (Windows 10 Codesys Control Win 64) und Codesys Profinet Device (Windows 7 Codesys Control Win 64) ohne die jeweiligen Lizenzen in Demo Version zu testen. Wo kann man Beispiele finden?
Mit freundlichen Grüßen
Hello everybody,
Is it possible to test a communication between a Codesys Profinet Controller (Windows 10 Codesys Control Win 64) and Codesys Profinet Device (Windows 7 Codesys Control Win 64) without the respective licenses in demo version? Where can I find examples?
Best regards
Hi,
here in this Forum section is an example project for profinet with two Raspberry Pi's
l viewtopic.php?f=23&t=6247&p=16870#p16870 l
BR
Edwin
Hello Edwin,
unfortunately the profinet communication is not working.
I have take the project with 2 raspberry pi.
The part for profinet Controller I have loaded to Rasbery Pi (Bild 1-4).
The part for profinet device I have loaded to Codesys Control Win X64 (Bild 5-7)(I have also a Codesys Profinet Device License on The Codesys Runtime key which is insertet to the Win 7 PC).
Can you please tell me any sugestion what I m doing wrong.
Do I have to do something with the license for Codesys Profinet Device on the Codesys Runtime Key or it is enough just to plug in the PC.
Best regards
Usually, when you declare a PN device with 8 in, 64 in/out, 8 out you have to declare the controler symetrically, communication wise. So 8 out, 64 in/out, 8 in.
I don't know if this apply for codesys, but in siemens softs, it does.
Hi,
winpcap is installed? ( this is mandatory for Control Win)
For a test I would recommend to disable the firewall
then try to scan the pn device from the pn controller application.
Send/attach the screenshots and plclogger of that.
BR
Edwin
Hello Edwin,
attached the screenshots.
Best regards