CODESYS Forge - CODESYS Forge / Talk / Engineering 🇬🇧: How to use PLC_Open FBs with PROFINET servodrive (PROFIdrive layer)

How to use PLC_Open FBs with PROFINET servodrive (PROFIdrive layer)

Forum: Engineering 🇬🇧

Creator: w.romiguieres

Created: 2024-10-29

Updated: 2024-10-30

w.romiguieres - 2024-10-29

Hello,

I would like to know if there is a PROFIdrive layer in CODESYS.

I am already familliar with Codesys's SoftMotion on CANOpen/EtherCAT (to control PLC Open FBs), and I need the same kind of stuff for PROFINET-IO devices;

In my configuration, I have a CIFX board from Hischer to enable IRT, the SoftPLC "Codesys Control RTE V3 x64", and a servo-drive from INFRANOR that implements PROFINET / PROFIdrive (with IRT) protocol.

This drive works well with the Object Technology of Tia Portal, but some customers use Codesys.

Do you have an idea how to do that?

Thanks in advance.

Regards,

William ROMIGUIERES
INFRANOR France

If you would like to refer to this comment somewhere else in this project, copy and paste the following link:

eschwellinger - 2024-10-30

At the moment, no chance to do this - this is not supported

If you would like to refer to this comment somewhere else in this project, copy and paste the following link:

Log in to post a comment.