Welcome to our new forum
All users of the legacy CODESYS Forums, please create a new account at account.codesys.com. But make sure to use the same E-Mail address as in the old Forum. Then your posts will be matched.
Close
There is a very nice description how to setup a BeagleBone for CANopen in the Product Data Sheet (https://store.codesys.com/codesys-control-for-beaglebone-sl.html). However the description is for the depreciated "Beaglebone CAN Cape". Therefore I wonder how it is possible to set up the CANopen network on the new "BeagleBone Comm Cape" (https://github.com/beagleboard/capes/tree/master/beaglebone/Comms)?
Thank you very much for your replies!
If you would like to refer to this comment somewhere else in this project, copy and paste the following link:
Dear Colleagues,
There is a very nice description how to setup a BeagleBone for CANopen in the Product Data Sheet (https://store.codesys.com/codesys-control-for-beaglebone-sl.html). However the description is for the depreciated "Beaglebone CAN Cape". Therefore I wonder how it is possible to set up the CANopen network on the new "BeagleBone Comm Cape" (https://github.com/beagleboard/capes/tree/master/beaglebone/Comms)?
Thank you very much for your replies!