How do I generate a GSDML file when I configure my CODESYS as device Profinet? The topology would be the use of two Codesys Runtimes, a Master and a device. Do you have an example?
If you would like to refer to this comment somewhere else in this project, copy and paste the following link:
Hi at all,
I have a similar problem. The PN-controller is connected but the connect to the device fails. Perhaps there is a problem with the gsd from codesys because tiaportal ignores the generated one...
Do you have an idea what is wrong?
Thanks in advance for your help.
How do I generate a GSDML file when I configure my CODESYS as device Profinet? The topology would be the use of two Codesys Runtimes, a Master and a device. Do you have an example?
export the GSDML from the device repository
According to the attached image, if you were unsuccessful in communicating, could you send a description?
According to the attached image, if you were unsuccessful in communicating, could you send a description?
Hi at all,
I have a similar problem. The PN-controller is connected but the connect to the device fails. Perhaps there is a problem with the gsd from codesys because tiaportal ignores the generated one...
Do you have an idea what is wrong?
Thanks in advance for your help.