Welcome to our new forum
All users of the legacy CODESYS Forums, please create a new account at account.codesys.com. But make sure to use the same E-Mail address as in the old Forum. Then your posts will be matched.
Close
Hi ,
I'm lost !!
in the help , i can read the following :
A drive must fulfill the following requirements of use with CODESYS SoftMotionLight:
EtherCAT or CAN support
CiA 402 support, especially in the following operating modes:
Profile position mode (for MCMoveAbsoluteSML / MCMoveRelativeSML)
Profile velocity mode (for MCMoveVelocitySML)
Homing mode (for MCHomeSML.
If the drive supports one of these modes, then you cannot use the respective function blocks.
So ,if I understand , I can't use SMC_Movexxxx and SML_Homing if my drive is Cia402 Compliant ???
How should i do ?? just with Control word ?
Thanks in advance
If you would like to refer to this comment somewhere else in this project, copy and paste the following link:
This is a translation error.
If you switch to German, and translate the sentence, you get instead "If the drive does not support one of these modes, you cannot use the corresponding function blocks."
If you would like to refer to this comment somewhere else in this project, copy and paste the following link:
Hi ,
I'm lost !!
in the help , i can read the following :
A drive must fulfill the following requirements of use with CODESYS SoftMotionLight:
EtherCAT or CAN support
CiA 402 support, especially in the following operating modes:
Profile position mode (for MCMoveAbsoluteSML / MCMoveRelativeSML)
Profile velocity mode (for MCMoveVelocitySML)
Homing mode (for MCHomeSML.
If the drive supports one of these modes, then you cannot use the respective function blocks.
So ,if I understand , I can't use SMC_Movexxxx and SML_Homing if my drive is Cia402 Compliant ???
How should i do ?? just with Control word ?
Thanks in advance
This is a translation error.
If you switch to German, and translate the sentence, you get instead "If the drive does not support one of these modes, you cannot use the corresponding function blocks."