I am using a new project, with nothing, but when add a simple cam table, and compile, there will be errors.
It seems some add-on or library was missing, but there is not any hint.
Could you help, please.
is it possible, that SM3_Basic is missing in the library manager?
(It should be inserted automatically when adding a Cam table, along with the other motion libs.)
You can add it manually and see if that solves the compile errors.
Best regards,
Georg
👍
1
If you would like to refer to this comment somewhere else in this project, copy and paste the following link:
Hi gseidel,
Thanks a lot.
My softmotion is 4.18,so the SM3_Basic version is 4.18 by default.
When I change the version of SM3_Basic to 4.17,complie works good then.
Thank you for your kindness.
If you would like to refer to this comment somewhere else in this project, copy and paste the following link:
I am using a new project, with nothing, but when add a simple cam table, and compile, there will be errors.
It seems some add-on or library was missing, but there is not any hint.
Could you help, please.
Hi liai,
is it possible, that SM3_Basic is missing in the library manager?
(It should be inserted automatically when adding a Cam table, along with the other motion libs.)
You can add it manually and see if that solves the compile errors.
Best regards,
Georg
Hi gseidel,
Thanks a lot.
My softmotion is 4.18,so the SM3_Basic version is 4.18 by default.
When I change the version of SM3_Basic to 4.17,complie works good then.
Thank you for your kindness.
Hi liai,
I tried it with a fresh CODESYS SP21 Patch 2 installation and SoftMotion 4.18, but cannot reproduce the compile errors.
Could you please upload a project archive that has the errors? Then I can have a deeper look.
https://dl.codesys.com/s/q4KcbKCcZndg6oR
Best regards,
Georg