dgp hat geschrieben:
When I use CNC_Editor, I find the radius is always 100 in G02 and G03. I do not understand. I hope someone can tell me.
% comment
N0001 G01 X30 Y30 F100
N0001 G02 X40.0 Y 0.0 R100
This R100 is the default setting for a g2,g3.
If you draw it graphical, you can change the radius for the actual drawn element by clicking in the upper window and overwrite the value(R100) in the editor.
There is a Tracker entry #5213 for an improvement.
There should be an additional point on the arc which change graphically the radius by dragging this point.
If you would like to refer to this comment somewhere else in this project, copy and paste the following link:
When I use CNC_Editor, I find the radius is always 100 in G02 and G03. I do not understand. I hope someone can tell me.
% comment
N0001 G01 X30 Y30 F100
N0001 G02 X40.0 Y 0.0 R100
This R100 is the default setting for a g2,g3.
If you draw it graphical, you can change the radius for the actual drawn element by clicking in the upper window and overwrite the value(R100) in the editor.
There is a Tracker entry #5213 for an improvement.
There should be an additional point on the arc which change graphically the radius by dragging this point.