Hello, thanks for the info. I thought that Linux Arm SL only supported 32-bit processors, but it seems no. I cannot see Linux Arm 64 on the store, I presume we have to contact sales about that.
Additional questions, if I may?
- what OS do you use with these solutions?
- Why do you use Arm SL on one device and Arm 64 SL on the other device?
- Have you used profinet IO successfully with either (e.g. drives, ET200SP)?
Thanks in advance!
Last edit: cliffpenn 2022-05-06
If you would like to refer to this comment somewhere else in this project, copy and paste the following link:
Hi,
there are two version available arm sl / arm 64 sl - license is the same.
Use the CODESYS installer to install the packages.
why? It was at that time when I tested it available-
Siemens Simatic IOT2050 (Quad Core) - 64Bit - 16 GB eMMc - SIEMENS RT_patched 64Bit OS
Siemens Simatic IOT2050 (Dual Core) - 32Bit Debian - use Image from Siemens Forum
Ptofinet works with the CODESYS Profinet stack - with ET200SP not tested with drives - guess IRT is missing maybe. ( not verified)
👍
1
If you would like to refer to this comment somewhere else in this project, copy and paste the following link:
Dear forum members / Codesys Foundation,
This topic has been raised a couple of times before, but I'd like to see if there are any updates.
Has anyone got CodeSys runtime working on the Siemens IOT2050? If yes, which runtime product was used?
If not, should it work, in theory? and what runtime should I test it with?
Thanks in advance!
Cliff
P.S.
Here is the IOT2050 datasheet. It uses an ARM TI AM6528 GP
https://mall.industry.siemens.com/mall/en/nz/Catalog/DatasheetDownload?downloadUrl=teddatasheet%2F%3Fformat%3DPDF%26caller%3DMall%26mlfbs%3D6ES7647-0BA00-0YA2%26language%3Den
Here is a slide show I found on using an ARM processor with Codesys:
https://e2e.ti.com/cfs-file/__key/communityserver-discussions-components-files/791/Using-Codesys-Control-on-Sitara-AM64x-RT-Linux-for-PLC-controller-stacks_5F00_presented.pdf
more posts ...
Try using the Vanilla ARM Runtime;
CODESYS Control for Linux ARM SL
Last edit: hermsen 2022-05-05
we use on the 4 core device - Linux Arm 64 and on the 2 Core type of the IOT2050 the Linux Arm SL
Hello, thanks for the info. I thought that Linux Arm SL only supported 32-bit processors, but it seems no. I cannot see Linux Arm 64 on the store, I presume we have to contact sales about that.
Additional questions, if I may?
- what OS do you use with these solutions?
- Why do you use Arm SL on one device and Arm 64 SL on the other device?
- Have you used profinet IO successfully with either (e.g. drives, ET200SP)?
Thanks in advance!
Last edit: cliffpenn 2022-05-06
Hi,
there are two version available arm sl / arm 64 sl - license is the same.
Use the CODESYS installer to install the packages.
why? It was at that time when I tested it available-
Siemens Simatic IOT2050 (Quad Core) - 64Bit - 16 GB eMMc - SIEMENS RT_patched 64Bit OS
Siemens Simatic IOT2050 (Dual Core) - 32Bit Debian - use Image from Siemens Forum
Ptofinet works with the CODESYS Profinet stack - with ET200SP not tested with drives - guess IRT is missing maybe. ( not verified)