Welcome to our new forum
All users of the legacy CODESYS Forums, please create a new account at account.codesys.com. But make sure to use the same E-Mail address as in the old Forum. Then your posts will be matched.
Close
I have an 4.3" LCD connected to my ARM based linux board with i2c touch. i can use evtest or "cat /dev/input/event0 | hexdump" from my terminal to read the touch coordinates. Is there a way to do the same touch coordinates reading from the codesys?
if yes can some one help me with an example.
thanks
-Kris.
If you would like to refer to this comment somewhere else in this project, copy and paste the following link:
Hi Codesys forum,
I have an 4.3" LCD connected to my ARM based linux board with i2c touch. i can use evtest or "cat /dev/input/event0 | hexdump" from my terminal to read the touch coordinates. Is there a way to do the same touch coordinates reading from the codesys?
if yes can some one help me with an example.
thanks
-Kris.