CODESYS Forge - CODESYS Forge / Talk / Runtime 🇬🇧: WAGO PFC200 + IO-LINK

WAGO PFC200 + IO-LINK

Forum: Runtime 🇬🇧

Creator: smarmiroli

Created: 2019-03-19

Updated: 2019-03-20

smarmiroli - 2019-03-19

Hi

how can i configure WAGO master IO LINK ( 750-657) whithout the specific WAGO program "port configuration"?

Thanks in advance

smarmiroli

If you would like to refer to this comment somewhere else in this project, copy and paste the following link:

eschwellinger - 2019-03-20

Hi,

not really possible at least not easy, there is no library available for this. ( Guess Wago should have one for eCockpit ?!)
In your other post you write:

Zitat:
PFC compatible with my Ethercat application project

So why not using the the EL6224 IO-Link device
https://www.youtube.com/watch?v=GadTtFrnUEc&t=3

At least a ready to use solution.

BR
Edwin

If you would like to refer to this comment somewhere else in this project, copy and paste the following link:

smarmiroli - 2019-03-20

Thank you very much..
but..
.. don't you ,or someone else in the forum, think is possible to have the same result with a Wago IO-LINK master device?

BR
smarmiroli

If you would like to refer to this comment somewhere else in this project, copy and paste the following link:

eschwellinger - 2019-03-20

No unfortunately not.
There is no configuration and no driver available for CODESYS for this Wago IO-LINK master device.

BR
Edwin

If you would like to refer to this comment somewhere else in this project, copy and paste the following link:

smarmiroli - 2019-03-20

Thanks.
..when the way is the only way , is the best way!
BR
smarmiroli

If you would like to refer to this comment somewhere else in this project, copy and paste the following link:

Log in to post a comment.