I'm using Codesys v3.21SP4 on my PC via ControlWin to establish CAN communication through the PC's USB port.
The software works fine.
The CAN/USB converter works fine and is validated.
However, there is no communication.
Which folder and file should be modified to allow the CAN/USB converter to work and thus achieve the connection?
Converter used: PCAN-View
Information not yet processed:
Access the folder: C:\Program Files (x86)\3S CODESYS\GatewayPLC\CODESYSControl.cfg
Uncomment the line: Component.5=CmpPCANBasicDrv
Any help would be appreciated.
If you would like to refer to this comment somewhere else in this project, copy and paste the following link:
I'm using Codesys v3.21SP4 on my PC via ControlWin to establish CAN communication through the PC's USB port.
The software works fine.
The CAN/USB converter works fine and is validated.
However, there is no communication.
Which folder and file should be modified to allow the CAN/USB converter to work and thus achieve the connection?
Converter used: PCAN-View
Information not yet processed:
Access the folder: C:\Program Files (x86)\3S CODESYS\GatewayPLC\CODESYSControl.cfg
Uncomment the line: Component.5=CmpPCANBasicDrv
Any help would be appreciated.