Welcome to our new forum
All users of the legacy CODESYS Forums, please create a new account at account.codesys.com. But make sure to use the same E-Mail address as in the old Forum. Then your posts will be matched.
Close
We are testing an embedded solution Codesys based in automatuon side and QT in HMI side. We lowered boot time to <10s, HMI + Runtime, but Tasks are not starting until OPC-UA service is not running. We don't need this service, but I cannot find if is possible disable it. It's requiring about other 10s until tasks start from runtime stared.
If you would like to refer to this comment somewhere else in this project, copy and paste the following link:
We are testing an embedded solution Codesys based in automatuon side and QT in HMI side. We lowered boot time to <10s, HMI + Runtime, but Tasks are not starting until OPC-UA service is not running. We don't need this service, but I cannot find if is possible disable it. It's requiring about other 10s until tasks start from runtime stared.
https://faq.codesys.com/display/CDSFAQ/OPC+UA+Server
See the section 'Deactivating'
Thankyou... Now is booting, starting HMI in <10s and PLC <20s.