Welcome to our new forum
All users of the legacy CODESYS Forums, please create a new account at account.codesys.com. But make sure to use the same E-Mail address as in the old Forum. Then your posts will be matched.
Close
Hello everyone,
For first time activating Codesys Control for Raspberry Pi v 4.1.0.0 using Online activation with Ticket ID, is it mandatory to activate user management on the device?
If User management is not setup, no container found error is thrown.
The container is found only after setting user management and login to the device.
Is there any workaround for activating the devices using Online Ticket ID with simplicity.
This was not the case with older codesys control for Raspverry Pi versions. e.g: v4.0.0.0
It is not ideal from OEM point of view to activate user management for every device inorder to license the device using Online activation with Ticket ID.
Thanks for the hint.Turning User management was desired only for licensing bulk of the devices and
then restoring the default User Configuration from the installed codesys runtime.
Following setting works in disabling user management in "CODESYSControl_User.cfg"
Hello everyone,
For first time activating Codesys Control for Raspberry Pi v 4.1.0.0 using Online activation with Ticket ID, is it mandatory to activate user management on the device?
If User management is not setup, no container found error is thrown.
The container is found only after setting user management and login to the device.
Is there any workaround for activating the devices using Online Ticket ID with simplicity.
This was not the case with older codesys control for Raspverry Pi versions. e.g: v4.0.0.0
It is not ideal from OEM point of view to activate user management for every device inorder to license the device using Online activation with Ticket ID.
Regards,
Amar
Last edit: ajadhav 2021-08-26
It is modern practice to have security enabled by default.
You can turn it off here:
https://faq.codesys.com/display/CDSFAQ/Device+UserManagement
Thanks for the hint.Turning User management was desired only for licensing bulk of the devices and
then restoring the default User Configuration from the installed codesys runtime.
Following setting works in disabling user management in "CODESYSControl_User.cfg"
[CmpSecureChannel]
CertificateHash=5ab21d81c63a48b3410f1f3e95bd463645986590
SECURITY.CommunicationMode=PLAIN_AND_ENCRYPTED
[CmpUserMgr]
AsymmetricAuthKey=c6c2a088595c3fe17cf23ff5705a134b3e9cff9f
SECURITY.UserMgmtEnforce=NO