Welcome to our new forum
All users of the legacy CODESYS Forums, please create a new account at account.codesys.com. But make sure to use the same E-Mail address as in the old Forum. Then your posts will be matched.
Close
Hi all,
for a deeper understanding of the Codesys RTE - I created a simple application with 3 IEC tasks (Ta,Tb,Tc) each with different priorities, and different cycle times.
The application runs on Windows 10 in the Soft PLC CODESYS Control Win V3.
If my understanding is correct, the RTE i.e. the Process CodesysControlService should spawn 3 threads (Th_a,Th_b,Th_c) which are executed with the defined cycle times, the priority of the threads should reflect the priority of the task set in the Codesys IDE.
Does somebody have an idea, how I could identify the respective threads in Windows?
Kind regards
Andrej
Last edit: andrej 2023-10-02
If you would like to refer to this comment somewhere else in this project, copy and paste the following link:
Hi all,
for a deeper understanding of the Codesys RTE - I created a simple application with 3 IEC tasks (Ta,Tb,Tc) each with different priorities, and different cycle times.
The application runs on Windows 10 in the Soft PLC CODESYS Control Win V3.
If my understanding is correct, the RTE i.e. the Process CodesysControlService should spawn 3 threads (Th_a,Th_b,Th_c) which are executed with the defined cycle times, the priority of the threads should reflect the priority of the task set in the Codesys IDE.
Does somebody have an idea, how I could identify the respective threads in Windows?
Kind regards
Andrej
Last edit: andrej 2023-10-02