Control Win stopped

ch-user
2018-02-20
2018-02-20
  • ch-user - 2018-02-20

    Hi,

    I have a problem with codesys control Win, after a certain time control Win stopped.

    01/26/18 15:42:06: --------------------------------------------------------------------------
    01/26/18 15:42:06: CODESYS Control Win V3 Service started
    01/26/18 15:42:06: Config file:
    01/26/18 15:42:06: C:\ProgramData\CODESYS\CODESYSControlWinV3\D5050FE1\targetvisuextern.Standard.cfg
    01/26/18 15:42:08: CODESYS Control Win V3 Service stopped
    02/18/18 11:18:56: CODESYS Control Service: Warning: No License found, terminating in approx. 5 minutes.
    02/18/18 11:24:25: CODESYS Control Win V3 Service stopped
    02/19/18 05:34:36: --------------------------------------------------------------------------

    The Power Efficiency Diagnostic is disable.
    Licenses OK.

    Codesys Control Win V3.5.12.0
    Windows 7 pro X64

    Thank you

     
  • eschwellinger

    eschwellinger - 2018-02-20

    Hi,
    enable the logger:

    c:\ProgramData\CODESYS\CODESYSControlWinV3x64\801BFF8C\CODESYSControl.cfg
    by removing these ';'

    [CmpLog]
    ;Logger.0.Name=PlcLog
    ;Logger.0.Filter=0xFFFFFFFF
    ;Logger.0.Enable=1
    ;Logger.0.MaxEntries=100000
    ;Logger.0.MaxFileSize=500000
    ;Logger.0.MaxFiles=3
    ;Logger.0.Backend.0.ClassId=0x0000010B ;sends logger messages to SysOut
    ;Logger.0.Backend.1.ClassId=0x00000104 ;writes logger messages in a file
    ;Logger.0.Backend.2.ClassId=0x00000135 ;sends logger messages as UDP syslog
    ;Logger.0.Type=0x314 ;Set the timestamp to RTC
    ;Logger.1.Name=CommLog
    ;Logger.1.Enable=1

    then check the PlcLog.csv after the stop/crash ...

    BR
    Edwin

     

Log in to post a comment.