CODESYS Forge - CODESYS Forge / Talk / Runtime 🇬🇧: Codesys 3.5 on Wago 750-8202 firmware update

Codesys 3.5 on Wago 750-8202 firmware update

Forum: Runtime 🇬🇧

Creator: millivolt

Created: 2022-08-06

Updated: 2022-09-09

millivolt - 2022-08-06

I just want to know if anyone has updated a Wago 750-8202 from its native firmware to codesys 3.5.

as when I look in the setup it only has V2 or none as a runtime option.

is it possible and is there any know issues doing it

👍
1

If you would like to refer to this comment somewhere else in this project, copy and paste the following link:
- tomas111 - 2022-09-09
  
  What is it about? About the eCocopit platform ? Or codesys control PFC200 SL ?
  
  If you would like to refer to this comment somewhere else in this project, copy and paste the following link:

TimvH - 2022-08-07

Many people have done this already. Download the "PFC200" package in the store, or install it though the CODESYS Installer. Then open the "Update PFC200" through the Tools menu and follow the installation procedure. More information can be found here:
https://content.helpme-codesys.com/en/CODESYS%20Control%20for%20PFCx%20SL/_pfcx_install_runtime.html

👍
1

If you would like to refer to this comment somewhere else in this project, copy and paste the following link:
- millivolt - 2022-08-17
  
  Many thanks for the heads up, All sorted
  
  If you would like to refer to this comment somewhere else in this project, copy and paste the following link:

tomas111 - 2022-08-16

I don't have this folder, how do I find it or download it?

If you would like to refer to this comment somewhere else in this project, copy and paste the following link:
- millivolt - 2022-08-17
  
  it has to be bought from the codesys store 100 euros
  
  👍
  1
  
  If you would like to refer to this comment somewhere else in this project, copy and paste the following link:

eschwellinger - 2022-08-18

or just use the CODESYS Installer to install it in your CODESYS Version (>=17 Version)

PFCPackage.jpg

If you would like to refer to this comment somewhere else in this project, copy and paste the following link:
- tomas111 - 2022-08-18
  
  In the test use mode, it is impossible for 15-30 days? If everything suits me, I'll buy it.
  
  If you would like to refer to this comment somewhere else in this project, copy and paste the following link:

tomas111 - 2022-08-18

I installed the package, but I can't find the built-in modules, CAN and RS485, are they not supported?

If you would like to refer to this comment somewhere else in this project, copy and paste the following link:

Log in to post a comment.