I recently added a sense hat to my RP and currently experiencing intermittent failures with the HTS221 temperature and humidity sensor.
To rectify the issue, I've tried to stop/start the codesys and also a reboot, but still doesn't come good. The only way I've found so far is to manually power cycle the RP, which is not desirable at all, but does fix the issue with the HTS221 sensor.
On the sense hat, I'm also using the LPS25H (temperature and barometer sensor) and the LED display where they remain functional at all times.
Has anyone else experienced this issue?
Any suggestions to how I can get the HTS221 working again without power cycling the RP.
Note that I'm using RP Model 2B V1.1, SL, Codesys V3.5.16.0
If you would like to refer to this comment somewhere else in this project, copy and paste the following link:
I recently added a sense hat to my RP and currently experiencing intermittent failures with the HTS221 temperature and humidity sensor.
To rectify the issue, I've tried to stop/start the codesys and also a reboot, but still doesn't come good. The only way I've found so far is to manually power cycle the RP, which is not desirable at all, but does fix the issue with the HTS221 sensor.
On the sense hat, I'm also using the LPS25H (temperature and barometer sensor) and the LED display where they remain functional at all times.
Has anyone else experienced this issue?
Any suggestions to how I can get the HTS221 working again without power cycling the RP.
Note that I'm using RP Model 2B V1.1, SL, Codesys V3.5.16.0
Also, when I power cycle my RP, I have to manually start Codesys every time.
Here's a screen shot of the sense hat under run time, just after I did a RP reboot.
As indicated in the diagram, the HTS221 sensor is not functional.
Is there anything else within these parameters I should look at?
Ideally, I would like to get the HTS221 functional without a RP power cycle as a work around.
Hi,
in my case this seems to work without problems.
See screenshot.
BR
Edwin
Last edit: eschwellinger 2020-05-30