Welcome to our new forum
All users of the legacy CODESYS Forums, please create a new account at account.codesys.com. But make sure to use the same E-Mail address as in the old Forum. Then your posts will be matched.
Close
I am using a M241 PLC to control a remote pump sump, to operate duty/standby two pumps and level control.
I am now looking for a handy HMI (10 in) with M241 as local operator panel. Also, with 3/4g wireless router (no static ip SIM, in Teltonic RUT955) connecting to HMI to allow HMI screen showing on phone/ipad.
HMI software to share/import variables from M241 programming software "EcoStruxture Machine Expert" is required.
Please help to give your suggestions.
Thanks.
If you would like to refer to this comment somewhere else in this project, copy and paste the following link:
Hi,
I am using a M241 PLC to control a remote pump sump, to operate duty/standby two pumps and level control.
I am now looking for a handy HMI (10 in) with M241 as local operator panel. Also, with 3/4g wireless router (no static ip SIM, in Teltonic RUT955) connecting to HMI to allow HMI screen showing on phone/ipad.
HMI software to share/import variables from M241 programming software "EcoStruxture Machine Expert" is required.
Please help to give your suggestions.
Thanks.