Hello, i want to connect my automation server and i follow the steps as desribed in the video series(https://www.youtube.com/watch?v=iiPKyyO4M00&list=PLaws15OZmd7Uu2W23zX2w424aI3TrOfHf) and also that guide (https://content.helpme-codesys.com/en/CODESYS%20Automation%20Server/_cas_add_plc_to_server.html).
When i go to "Allow Edge Gateway configuration.." from the Codesys gateway Systray running i get the message in the attached picture, so i open the Gateway.cgf but the file doesn't contain an cmpedgegateway section as mentioned in the message.
I have installed all the latest versions codesys and of the components mentioned in the guides.
How can i solve that problem?

yes add in:
c:\Windows\System32\config\systemprofile\AppData\Roaming\CODESYS\CODESYSGatewayV3\XXXXXXXX\Gateway.cfg

[CmpEdgeGateway]
MaintenanceMode=1

I installed patch 3 now and i get a new message, although i located and modified the files in system32 and sysWOW64 still doesn't work. One thing i noticed is thta in system32 folder CODESYSGatewayV3 now i have two different XXXXXXXX files with the latest being created today at the time of installation

sure on each installation this random number is generated so you need to ckeck which one is the right one to modify

if this does not work, you could install the 3.5.20.0 Gateway from the CODESYS Store.
https://store.codesys.com/de/codesys-edge-gateway-for-windows.html
then it is possible to enable it by righclick inthr task tray