Post by eschwellinger on onewire bus master stop working after 4.8.0.0 upgrade ^{CODESYS Forge talk (Post)}
hm.. wie wäre es mit 4.9.0.0 Runtime?
Last updated: 2023-09-21

Post by alexgooi on Init Array input on a method ^{CODESYS Forge talk (Post)}
Dear Forum, I would like to initialize an array input on a method. When I do this, I get the following error: "The type of ARRAY [1..2] OF BOOL cannot have a default value in this context." I attached a picture for more clarity. Is this simply not possible or is there a different way of tackling this problem? Thank you in advance
Last updated: 2024-02-26

How to set "Always updatevariables" to "enable 2" by default in DeviceDescription. ^{CODESYS Forge talk (Thread)}
How to set "Always updatevariables" to "enable 2" by default in DeviceDescription.
Last updated: 2020-12-10

"Update boot project" is default unchecked by login in V3.5 SP14 Patch1 ^{CODESYS Forge talk (Thread)}
"Update boot project" is default unchecked by login in V3.5 SP14 Patch1
Last updated: 2019-04-22

Several py file share one external file to get some default value ^{CODESYS Forge talk (Thread)}
Several py file share one external file to get some default value
Last updated: 2019-12-12

WebVisu with Runtime Based User Management, Default user (no login) - is it possible? ^{CODESYS Forge talk (Thread)}
WebVisu with Runtime Based User Management, Default user (no login) - is it possible?
Last updated: 2024-03-14

[Error when Install Codesys for Beaglebone black ver4.0.0] cannot access '/sys/bus/i2c/devices/0-0050/at24-0/nvmem': No such file or directory ^{CODESYS Forge talk (Thread)}
[Error when Install Codesys for Beaglebone black ver4.0.0] cannot access '/sys/bus/i2c/devices/0-0050/at24-0/nvmem': No such file or directory
Last updated: 2021-11-21

Post by eschwellinger on CAN-Bus in Demo-Version ^{CODESYS Forge talk (Post)}
Eigentlich alles ok - sollte gehen - der MDBX wie ist der konfiguriert (also die PDO's) auf Änderung / zyklisch? Wenn du einen CAN Monitor hast, anschließen und schauen was genau auf dem BUS los ist. Also einen CAN Trace machen.
Last updated: 2024-02-09

Post by snhatton on Saving variable values on power cycle (RevPi Connect) ^{CODESYS Forge talk (Post)}
Have you tried using the persistence manager which uses the file system of the controller to store persistent variables?
Last updated: 2023-12-04

Post by ton on How to create a stopwatch? ^{CODESYS Forge talk (Post)}
If you use LTIME() you will be very accurate and be able to have a normal task cycle time.
Last updated: 2023-12-16

Post by tk096 on High Cycle Times for SoftMotion_PlanningTask when using AxisGroup ^{CODESYS Forge talk (Post)}
Hi, which (kind of) PLC do you use?
Last updated: 2024-03-13

Post by tk096 on SMC_NCDecoder very slow to decode lines ^{CODESYS Forge talk (Post)}
Hi, you can call the decoder function block in a loop and/or decrease the task cycle interval of Task_PATH.
Last updated: 2024-08-23

Post by eschwellinger on RPI can system operation like rm in a shell have an impact on a Task cycle time ^{CODESYS Forge talk (Post)}
Which version exactly do you use?
Last updated: 2024-09-23

Post by manuknecht on High Cycle Times for SoftMotion_PlanningTask when using AxisGroup ^{CODESYS Forge talk (Post)}
Hi, we did install the real-time kernel patch on the RPI and also performed the additional optimizations including isolating the cores. Changing the configuration of the planning task e.g. running it on a separate core, changing the cycle times and mode from cyclic to freewheeling did not show any improvements.
Last updated: 2024-03-14

Post by acc00 on Main Task cycle too long leading to PLC Fail ^{CODESYS Forge talk (Post)}
I have 2 Wago PFC200 PLC, running with Runtime SP19 Patch 5, with the Redundant application. The PLC communicates as Modbus Master with at this moment 15 Modbus Slaves -later there will be 28 in total- (Drives, Power management units,...). These devices are connected in 2 rings (1 ring of Drives, 1 ring of Power Management units), with 2 Managed Moxa Switches being part of the ring. Each PLC is connected to one of these switches. The issue I'm encountering is that the Cycle time of the Active PLC goes very high when I'm closing the Drive ring (simulating an issue on one Cabinet supply, resulting in that one Drive shut down, which can happen on field quite often). As a result of this long cycle, the PLC fails and goes to Exception, and the Passive PLC does not take control of the system. A normal cycle is around 30ms for the Main task, and a few ms for the Ethercat task. When I monitor with Profiler, I see that in this Maximum Cycle, the main Task is only taking 13ms, so I'm not sure where the PLC is hanging for so long. Is the remaining cycle time the Redundant management/sync or something else? Thank you in advance.
Last updated: 2024-03-08

Post by snhatton on Add device greyed out ^{CODESYS Forge talk (Post)}
What type of PLC are you using?
Last updated: 2023-12-19

Post by snhatton on Add device greyed out ^{CODESYS Forge talk (Post)}
What type of PLC are you using?
Last updated: 2023-12-19

Post by eschwellinger on Add licence ^{CODESYS Forge talk (Post)}
Which plc and in which version? Runtime Type? Runtime Version?
Last updated: 2024-01-05

Post by remcoborghuis on C0032 Error to type Pointer to IoConfigParameter ^{CODESYS Forge talk (Post)}
Hi All, I'm using codesys on a raspberry PI. I use V3.5 SP18 Patch 2 development system and codesys for raspberry pi 4.8.0.0. Sometimes when I build the project I get error messages C0007: Expression expected instead of ',' and C0032: Cannot convert type 'Unknow type: '!!!'ERROR'!!!" to type 'POINTER TO IoConfigParameter'. I can't click on the message to bring me to the fault. After I do a "Clean all" the build finishes successful. Anyone who can help me with this problem? Thanks! Remco Borghuis
Last updated: 2024-03-25

Post by abauza on Type mappings in Datasource ^{CODESYS Forge talk (Post)}
Hi I have the same problem, any solution for this? Thanks
Last updated: 2024-09-12

Post by elektron785 on CAN-Bus in Demo-Version ^{CODESYS Forge talk (Post)}
Hallo, wie verhält es sich mit der Demo-Version und Datenübertragung z.B. via CAN-Bus. Der Bus läuft, das Device befindet sich im Zustand "Operational" aber es werden keine Daten von der Soft-SPS empfangen. Ich benutze aktuell eine nicht lizenzierte Version von CoDeSys Control for Linux ARM64SL. Normalerweise sollte die Demo-Version uneingeschränkt laufen - also kann ich davon ausgehen, dass es sich um einen Programmierfehler handelt oder ist die Feldbusfunktion ohne Lizenz doch in irgendeiner Form eingeschränkt verfügbar (außer dem 30 Minuten Limit nach Reboot)?
Last updated: 2024-02-06

Post by tk096 on Some 'pathetic' errors in SoftMotion program ^{CODESYS Forge talk (Post)}
Meanwhile, I would like to understand why the motion FB instances must still be called even after the Execute is set to FALSE, especially in view of the fact that the next instruction is programmed to abort the previous one, with BufferMode set to 'Aborting'. All these unnecessary FB calls are an unnecessary overhead on the CPU anyway. Is there any precise rule about when to cease calling the various instances? (It should precisely be the 'done' status that says this one has finished its work). In general: - Motion function blocks have to be called until they report 'Done', 'Error', 'CommandAborted' or a subsequent motion FB with BufferMode=Aborting is started in the current cycle. - Setting the Execute input to FALSE will not abort any ongoing motion of the motion function block. For example, one case that is often problematic is the execution of the Axis Halt instruction. When, after a MoveAbosulte instruction this returns the event as 'done' and indeed the axis is in standstill, the state machine first sets the move instruction to FALSE, and the next cycle sets the Halt request to TRUE. Some of the time everything works out fine. Occasionally, however, in this exchange, the axis goes into fault, also losing the OPERATIONAL state. I think the error SMC_FB_WASNT_CALLED_DURING_MOTION is only a follow-up (and misleading) error that results from the axis not being in operational state anymore (bus problems). Is there an error 'regulator or start not set' in the device log before the error 'motion generating FB wasn't called for at least one cycle'? Which error does the respective function block (Halt.ErrorId) report?
Last updated: 2024-07-22

Post by janderson on Ethercat scan for devices not picking up EL7041 as a softmotion axis ^{CODESYS Forge talk (Post)}
also my ethercat bus won't run.
Last updated: 2023-09-02

Post by eschwellinger on CAN-Bus in Demo-Version ^{CODESYS Forge talk (Post)}
nein nur die 30 Minuten- aber sonst keine Einschränkung. Gerätebaum alles Grün/Orange? IO Variablen mappen und auch im Programm verwendet?
Last updated: 2024-02-06

Post by martinlithlith on Mux I2C ^{CODESYS Forge talk (Post)}
Hi! I´ll try to get this thread going again as i´m having simliar problems. Right now i get a red triangle on my connected devices (i´m testing with a BME280 sensor and a PCA9685 resvo driver). The TCA9548 have the green symbol beside it. On the "red" devices i get that the bus is not running. I have tried to either run it using the parent bus cycle setting or creating a new freewheeling task prio 1 but nothing helps. I have compared my settings to the settings from the example from the MUX package and i have read (i think) every thread in forge that could be of interest. EDIT: The ic2detect only shows the mux (70-70) and the servo drive (70-76) so i´ll look in to if i managed to burn the 280-sensor while soldering). Another question regarding the 280 sensor. I have a sensor GY-BM E/P 280 that should record humidity and temperatur. Could this be a problem with the library? Does anyone have an idea of what i might be doing wrong? I have some experience from Codesys but not much so this could be an easy one. All suggestions are welcome. I tried to upload the project archive but it did not work. Should i upload the export or how could i show you my horrible project? Best, Martin
Last updated: 2023-10-22

Sort by relevance or date