Post by ranadheer on Control Win SL licensing ^{CODESYS Forge talk (Post)}
Hi johnlee and jeffgamsby Is Control win SL is a SoftPLc Extension SL
Last updated: 2025-10-18

Post by s1mon on Two OneWireMaster on one Raspberry PI 5 ^{CODESYS Forge talk (Post)}
I don't know why the EtherCat fails, but what happens is: First I have only one 1WireMaster running on my Raspberry Pi and EtherCat is running fine. Then I'd like to add a 2nd 1WireMaster. Therefore I enable a 2nd GPIO Pin on the raspberry in the file "/boot/firmware/config.txt". dtoverlay=w1-gpio,gpiopin=4,pullup=0 dtoverlay=w1-gpio,gpiopin=23,pullup=0 To be able to use this 2nd 1WireMaster in Codesys Runtime I Adjust the CODESYScontrol.cfg file and add there: PlaceholderFilePath.2=/sys/devices/w1_bus_master2, $OneWire2$ After a reboot the EtherCat Master is not working any more. I didn't even add a 2nd OneWire Master in Codesys, but still if I do the EtherCat does not work. Do you have an idea why?
Last updated: 2025-10-21

Post by uluking on CodeSys2.3 Modbus 64-Bit Double Read Problem ^{CODESYS Forge talk (Post)}
Hi everyone, I would appreciate your help with a problem I've been working on for a few days but haven't been able to resolve. I am reading data from a Siemens PAC3220 energy analyzer using Modbus with Wago-8202. However, the device's energy indices are given as doubles. Since a double variable is 64-bit, it is not possible to read it directly. I have been struggling for days, I have written many conversion functions but I have not been able to get results. I would appreciate your help. I read 4 word variables and processed them. I am converting them according to IEEE-754, but I can't seem to read the correct data. I would appreciate your help.
Last updated: 2025-10-27

Post by uluking on CodeSys2.3 Modbus 64-Bit Double Read Problem ^{CODESYS Forge talk (Post)}
Hi everyone, I would appreciate your help with a problem I've been working on for a few days but haven't been able to resolve. I am reading data from a Siemens PAC3220 energy analyzer using Modbus with Wago-8202. However, the device's energy indices are given as doubles. Since a double variable is 64-bit, it is not possible to read it directly. I have been struggling for days, I have written many conversion functions but I have not been able to get results. I would appreciate your help. I read 4 word variables and processed them. I am converting them according to IEEE-754, but I can't seem to read the correct data. I would appreciate your help.
Last updated: 2025-10-27

Post by msegon on OPC UA Client failed to connect ^{CODESYS Forge talk (Post)}
Hi everyone, I would appreciate your help with a problem I've been working on for a few days but haven't been able to resolve. I'm trying to read data from Tridium Niagara 4.15 OPC UA Server, but I get the error BadCertificateInvalid. As far as I understand, you need to add a CA certificate somewhere to establish a secure connection, but I don't know where. 2025-10-27T09:06:43.247Z, 0x0000008d, 4, 0, 0, * ERROR: OpcUa_Channel_BeginConnect: Cannot create secure channel without certificates! 2025-10-27T09:06:43.247Z, 0x00001090, 4, 0, 0, * ERROR: Datasource: Error Failed (268468242) in state Connecting I tried communicating without encryption, but it doesn't find the point. Has anyone managed to establish encrypted OPC UA communication?
Last updated: 2025-10-28

Post by reinier-geers on check if Programm pc is online ^{CODESYS Forge talk (Post)}
I did but then it turns out, codesys hangs its self vor 30 sec after a ping
Last updated: 2025-11-06

Post by albertovalente on How extract JSONElement containing Array data ^{CODESYS Forge talk (Post)}
Hi Creator: hazarath, Have you fix the problem? because I have the same issue Thanks a lot
Last updated: 2025-11-12

Post by albertovalente on How extract JSONElement containing Array data ^{CODESYS Forge talk (Post)}
Hi Creator: hazarath, Have you fix the problem? because I have the same issue Thanks a lot
Last updated: 2025-11-12

Post by timvh on runtime dynamic modbus devices ^{CODESYS Forge talk (Post)}
Maybe the ModbusFB library is a good option for you. See: https://forge.codesys.com/prj/codesys-example/modbus/home/Home/
Last updated: 2025-11-21

Post by timvh on Using a raspberry pi and NVLs to log variables outside of Codesys ^{CODESYS Forge talk (Post)}
Yes, this will work.
Last updated: 2025-11-21

Post by yangzhihai on Codesys monitor 4k ^{CODESYS Forge talk (Post)}
I use CODESYS V3.5 SP22 Patch 3 now, but it really doesn't work on a 4K screen.
Last updated: 2026-08-21

Post by timvh on PM564 online problem ^{CODESYS Forge talk (Post)}
You cannot. The code in the PLC is compiled. You either need the source code, or create a new application.
Last updated: 2026-09-29

Post by gseidel on SMC_Interpolator / CNC Abort – ControlAxisByPos Sometimes Remains Busy and Axis Continues Moving ^{CODESYS Forge talk (Post)}
Hi kishan, I would recommend to first execute a stop (input bSlowStop or bQuickStop of the interpolator). Only when the interpolator has stopped you should abort the interpolator and preprocessing FBs. BTW., a new rising edge of the execute input should suffice. In case preprocessing is done in a different task: take care to write the abort signal to a local variable in the path and interpolation task and use this local copy. (Otherwise, some preprocessing FBs might see an abort and others not, in the same cycle of the task.) Best regards, Georg
Last updated: 2026-10-27

Post by eschwellinger on Deploy LicenseServer for Linux SL ^{CODESYS Forge talk (Post)}
yes it is and it need to be realtime capable with a preempt_rt patched kernel.
Last updated: 2025-11-17

Post by eschwellinger on Deploy LicenseServer for Linux SL ^{CODESYS Forge talk (Post)}
yes it is and it need to realtime capable with a preempt_rt patched kernel.
Last updated: 2025-11-17

Post by jbcregen on Accessing parameters from a structure or function block with the web interface ^{CODESYS Forge talk (Post)}
Confirmed. The Data Analyzer tool can indeed access all OPC-UA symbols. Thanks !
Last updated: 2025-12-02

Post by yannickasselin on Access to the path *** is denied ^{CODESYS Forge talk (Post)}
You can still start Codesys as administrator as a workaroud.
Last updated: 2025-12-11

Post by aniket-b on Scara3 kinematic robot error ^{CODESYS Forge talk (Post)}
After I changed softmotion_planning task to different core, I no longer getting this error. Thanks a lot @gseidel
Last updated: 2026-01-14

Post by eschwellinger on No connection could be made because the target machine actively refused it ^{CODESYS Forge talk (Post)}
if you try to login by a ssh client, does this work?
Last updated: 2026-03-10

Post by nicolasquintin on Codesys Installation Always Freeze when the installing is almost done ^{CODESYS Forge talk (Post)}
Hi, I'm having the same issue. Did you find a way to successfully install Codesys software ?
Last updated: 2026-04-04

Post by simond on OpcUa_StatusCode Control ^{CODESYS Forge talk (Post)}
The OpcUa_StatusCode enum exists in CmpOPCUAStack Interfaces — how do I bind one to a published symbol so clients see the StatusCode change?
Last updated: 2026-05-06

Post by arwie on Frustration-Fueled Feedback on Project File Management and Git Integration ^{CODESYS Forge talk (Post)}
An other approach is to split the application into a hard real-time part running in CODESYS and the business logic running in Python asyncio. The business logic part is usually bigger and changes more often. As Python code is pure text, vscode and git are your friends. A performance example on YouTube (CODESYS SoftMotion + Python): https://www.youtube.com/watch?v=BT-L0H_4Aic Docs and code on GitHub: https://github.com/arwie/controlOS_demo/blob/main/docs/codesys_python_link.md Real-time variable exchange between a CODESYS application and a Python application running in parallel, using POSIX shared memory.
Last updated: 2026-06-21

Post by afrazeh2026 on Curtis 1226BL Drive ^{CODESYS Forge talk (Post)}
Subject: Curtis 1229-4105 CANopen (CiA 301 / CiA 402) Hello everyone, I am developing a battery-powered industry vehicle using a Curtis 1229-4105 motor controller together with a Siemens S7-1200 PLC and an HMS (Ixxat) CANopen Master. I am looking for someone who has practical experience with the Curtis 1229-4105 CANopen implementation. I would appreciate your help with the following questions: Does the Curtis 1229-4105 support only CANopen CiA 301, or does it also support CiA 402? Is an EDS file available for this controller? Is the CANopen Object Dictionary available? Has anyone successfully communicated with the Curtis 1229-4105 from a Siemens S7 PLC or another CANopen master? Are the CANopen PDOs and Object Dictionary based on the standard CiA profile, or are they Curtis-specific? Any documentation, examples, or practical experience would be greatly appreciated. Thank you very much.
Last updated: 2026-07-15

Post by timvh on Codesys Installation problem ^{CODESYS Forge talk (Post)}
Instead of complete VM's, you could also create a sandbox installation using the CODESYS installer.
Last updated: 2026-08-10

Post by lmarmonti on Login problem with FileTransfer on Raspberry Pi 5 ^{CODESYS Forge talk (Post)}
Thanks. If I understand correctly, this is a known historical CODESYS bug
Last updated: 2026-08-18

Sort by relevance or date