Post by cihangur on Application has invalid license metrics. ^{CODESYS Forge talk (Post)}
Hi, I have a "CODESYS Control Standard L" license and I use Ethercat and Profinet in my project. The project works seamlessly with two fieldbuses. However, when I add modbus_Com (Serial) or 1 OPC Tag to the project, the program throws an exception (Application app=Application has invalid license metrics!). My license should support 10*Modbus and 512 OPC Tags. Why might this problem occur?
Last updated: 2024-03-25

Post by hwopereis on Codesys Control shutdown ^{CODESYS Forge talk (Post)}
Hi, I'm experiencing this problem as well. Did the suggested combination resolve your issues in the end? If not, I can stop my efforts rolling back to these versions. I'm trying to get CC for RPi 4.8.0.0 installed on the device, but I can't find it after installing it through the packet manager.
Last updated: 2024-03-25

Post by nano on Map in Codesys ^{CODESYS Forge talk (Post)}
There are several versions, u can use an recipt, shm, perstance variables, persistsnce manager. all these ways has some pro's and con's and some of them depending on preparation of the controller byself. others depending on your functionalies and dependencies on project. for all of these ways, you can find the informations on the onlinehelp or from controller-oem
Last updated: 2024-04-04

Post by fabmorlino on Codesys v3.5 SP11 and Python scripts ^{CODESYS Forge talk (Post)}
Hi, I'm using codesys from a while, but I 'm not able to write phyton scripts. I whould like generate a PC txt file with the content of specific GVL codesys table, or better for my scope: a txt file from a STRUCT defined in CODESYS project. Any kind man could help me with some clue? Thanks Fabrizio
Last updated: 2024-04-05

Post by saugat10 on I have errors while building the project ^{CODESYS Forge talk (Post)}
I have some errors as you can see in the picture when i build the project. I have not been able to trace back to the error and i have no idea where to look at to fix this issue. What is GVL_Io? Is it related to some library?
Last updated: 2024-04-10

Post by koehler on Codesys 3.5.12 Module not Found ^{CODESYS Forge talk (Post)}
Hi there, I am getting troubles with a project. In the Hardware configuration I got some Lenze drives 9400. One of them got as status " Module not Found". Connection are good. ID Node of the Canopen network is also good. I don't find any reason for this status, nor any options to check.
Last updated: 2024-04-17

Post by installwhat on raspistepper error after install ^{CODESYS Forge talk (Post)}
from another post on this forum .... In your library project select Project -> Project Information. On the Properties table remove the "LanguageModelAttribute" Value "Qualified Access Only". This will allow you to access the object without qualifying the access. ...... I guess they've compiled it the library with that setting and now I need to mess around with versions.
Last updated: 2024-04-20

Post by matthew on Persistence Manager Backup ^{CODESYS Forge talk (Post)}
Hi @eschwellinger How does the persistent manager files work on v20? I would Like to upgrade my v19 as I'm still having issues. Sometimes if there is a power cut CodeSys won't load the Persistence Manager files and I have to redownload to the PLC and then copy my backup persistent files and then start the application. I hope it's a lot more robust in v20
Last updated: 2024-04-23

Post by phoward131 on Numpad decimal value requires leading zero ^{CODESYS Forge talk (Post)}
I have noticed on the standard numpad dialog, if a user enters a purely decimal number (ie '.6'), the numpad will not accept the value but gives no indication. One must type a leading zero (ie '0.6') in order for it to work. Is there a way to correct this so that a user can just type the decimal value?
Last updated: 2024-04-30

Post by arslan on G Code Position Shifting ^{CODESYS Forge talk (Post)}
Dear friends, I have a issue that. I would like to give a zero offset of any axis in G-Code by G54 from PLC code as below demonstration. N000 G00 X0 Y0 Z0 N010 G54 (offset from PLC) N020 G01 X0 Y0 Z0 . . How to fix it! BR
Last updated: 2024-05-02

Post by michelebianchi on cm4 runtime problem ^{CODESYS Forge talk (Post)}
hello i have installed codesys runtime mc sl and sl on a CM4 but after 30 second process exit. have tried those runtime versions: 4.08 4.09 4.10 4.11 i get this message in all situations: ooops... this runtime was built for RASPBERRYPI. Hardware version or firmware version not supported! (-18, 0x00000BB8, 0xFFFFFFFB) os version is raspbian bullseye
Last updated: 2024-05-02

Post by andrej on Channel timeout CmpChannelMgr ^{CODESYS Forge talk (Post)}
Hello, I use Codesys RTE 3.5.16.5. If I connect to the PLC I often get the following message: (see printscreen) 1. Channel timeout CMpChannelMgr. 2. Closing connection CmpChannelMgr. Can you tell me, what the meaning of this is? What does the number 1250030,1220020 resp. c400:0a0a:015a:0301 refer to? I could find any information in the online help. Thanks a lot.
Last updated: 2024-05-08

Post by manuknecht on Maximum dynamic limits of MC_MoveLinearAbsolute and MC_MoveLinearRelative ^{CODESYS Forge talk (Post)}
Hello all I use an axis group with two linear axes in a kinematic system. Using MC_MoveLinearAbsolute and MC_MoveLinearRelative, I am trying to realise dynamic movements (set velocity: 1 m/s, set acceleration: 30 m/s^2) with the highest possible jerk, as I want to compare this with a movement with a trapezoidal velocity profile. However, my measurements show that the axes accelerate with a maximum jerk of approx. 800 m/s^3, even if the value in the function block was set to 10,000 m/s^3. I have already increased the dynamic limits of the two axes accordingly (Velocity: 5000 u/s, Acc-/Deceleration: 250'000 u/s^2, Jerk: 100'000'000 u/s^3, where 1 u = 1 mm), but this had no effect. I have checked the input parameters of the function blocks and the VelFactor, AccFactor and JerkFactor factors are all set to the maximum (value 1). Reducing the cycle time has resulted in a higher jerk, but as we are already working with a cycle time of 1 ms, there is nothing more that can be done here. The axes themselves are still a long way from drawing the maximum current, which is why I assume that this should not be a problem either. Are there other factors or parameters that influence the dynamic limits and therefore allow faster movements? The PLC I am using is a Raspberry Pi 4 and Codesys V3.5 SP20 with all libraries up to date. Thanks in advance Manuel
Last updated: 2024-05-08

Post by yannickasselin on Linux ARM64 SL, GPIO Access ^{CODESYS Forge talk (Post)}
A bit of work but maybe possible to make your own driver using "CODESYS Control SL Extension Package". Look at the "ExternalIoDrv" example. It is installed in "C:\Program Files\CODESYS 3.5.20.0\CODESYS\CODESYS Control SL Extension Package" when you install the "CODESYS Control for Linux SL".
Last updated: 2024-05-08

Post by k2saki on Automatic TOOL Length Measurement like Typical CNC Machine. ^{CODESYS Forge talk (Post)}
I'd like to measure tool length using SW. How do I set variable from the accurate drive position when switch turn ON/OFF? Hopefully, I'd like to measure Z-Pos with M-Function in G-Code automatically, And I'd like to set it to G43 as tool length correction.
Last updated: 2024-05-09

Post by corriibme on JSON Utilities and SetArray ^{CODESYS Forge talk (Post)}
Hello @florian, Could you please help with how to set an array value? I've been trying to use the with the setKeyWithArray method which creates the key with an empty array value. But I have been unable to set items in this array? objindex:= fb_JBuilder.SetKeyWithArray("Key6", diParentIndex := diRootIndex); objindex2:= fb_JBuilder.SetValue(value:= iValue2, diParentIndex:= objindexx); //iValue: array[0..n] of int; Best regards
Last updated: 2024-05-11

Post by kuegerls on CSV Utility SL ^{CODESYS Forge talk (Post)}
Hello, I want to read a CSV file using the CSV Utility SL library, but I encounter an 'invalid_handle' error during initialization. What could be the cause? For my test program see the screenshot. I have purchased a license, and it is also installed on my PLC. Thank you in advance. Best regards, Stefan.
Last updated: 2024-05-13

Post by walkercope on Ethercat bus on Beckhoff CX with Codesys for Linux ^{CODESYS Forge talk (Post)}
Has anyone figured out a way to use the ethercat bus on a beckhoff CX using codesys running on linux? Using ethercat on the native NICs works fine but I get a "packet could not be sent" error when trying to scan the ethercat bus device. Errors and hardware in attached image.
Last updated: 2024-05-13

Post by eschwellinger on connect IDE to plc that uses modem ppp ^{CODESYS Forge talk (Post)}
Which plc type is it? Easy connection is to install a Gateway on remote side - this is available for Windows and Linux devices Then just add a new Gateway in CODESYS (with the IP Adress of the remote device) -> then scan the plc via this new added Gateway
Last updated: 2024-05-21

Post by eschwellinger on Recipe Manager - Not Creating Recipe Files ^{CODESYS Forge talk (Post)}
With Linux SL and Windows Control Win - with this example https://forge.codesys.com/prj/codesys-example/recipe-manageme/home/Home/ We see in the PLClogic directory the generated recipe files see my screenshot. c:\ProgramData\CODESYS\CODESYSControlWinV3x64\XXXXXXXX\PlcLogic\Hello.RecipeDef.txtrecipe c:\ProgramData\CODESYS\CODESYSControlWinV3x64XXXXXXX\PlcLogic\ABC123.OtherRecipes.txtrecipe
Last updated: 2024-05-21

Post by mp9876 on Problems with simulation in Window 10 ^{CODESYS Forge talk (Post)}
Hi Eschwellinger, sorry for so late reply but I found a solution back then; uninstall completely Codesys V3x64 and re-installed Codesys V3x32 to properly note the password I created and everything went ok. thank you for your suggestion and have a good day/evening Mike
Last updated: 2024-05-30

Post by bschraud on Code erzeugen mit kryptischer Fehlermeldung mit GVL_Io_dd05d808 ^{CODESYS Forge talk (Post)}
Hallo Ton, vielen Dank für den Tipp. Das Löschen der '.precompile cache’ Datei behebt das Problem. Beim nächsten Programmstart ist die Datei bei mir aber wieder da und leider der Fehler auch. Ich habe in codesys auch keine Einstellung zum automatischen Löschen der Datei beim Beenden des Programms gefunden. Ist bei dir der Fehler dauerhaft weg?
Last updated: 2024-06-03

Post by culius on How to reset AzureMQTTClient after error? ^{CODESYS Forge talk (Post)}
Hey Guys, is there any chance of direct reset of the AzureMQTTClient? When the Client runs in an error, I can not reset the client whit switch xEnable to off and on again. I always need to make a hard reboot. Any Ideas, or have someone else experienced this behavior? Kind Regards
Last updated: 2024-06-04

Post by totorovic on IO-LINK Package - new license model ^{CODESYS Forge talk (Post)}
Hello, I'm using th IDE Combivis studio 6 (codesys based) and I get an error message when I use IO-link. "The license is missing or invalid. The API is running in demo mode." However the package Manager indicates that no licence is required. It used to work, it seems that the free package has become a paying one. Can Codeys confirm this? BR
Last updated: 2024-06-06

Post by wb16 on Visualisation generates "Unresolved reference" ^{CODESYS Forge talk (Post)}
Hello Zol6, Have you solved this issue? I use Festo PLC CPX-E-CEC-C1 to create alarm monitoring project. In CODESYS V3.5-SP18 I used the Alarm Storage object and have the same problem. Is it the PLC that is not compatible or the version of the library is not match? Best, wb16
Last updated: 2024-06-10

Sort by relevance or date