Post by k2saki on Table How to set row number from 1 ( not from 0)
CODESYS Forge
talk
(Post)
In Codesys visu, Table row number always start from 0. How do I set row number from 1 ?
Last updated: 2024-05-25
Post by donm on Regarding trend storage access error
CODESYS Forge
talk
(Post)
i have created a project which contain 30 trend and suddenly trend recording is not working. its showing an error 30437."Determination of root pages for recording did not work for 'screen', error:30437" how to solve this issue?
Last updated: 2024-05-27
Post by donm on trend storage access error
CODESYS Forge
talk
(Post)
i have created a project which contain 30 trend and suddenly trend recording is not working. its showing an error 30437."Determination of root pages for recording did not work for 'screen', error:30437" how to solve this issue?
Last updated: 2024-05-27
Post by paro on Non-existing identifiers
CODESYS Forge
talk
(Post)
Hi, which CODESYS IDE version are you using? I think it's fixed in >= SP19 patch 7, maybe also in SP19 patch 6, but I'm not sure.
Last updated: 2024-05-29
Post by zer0g on Modbus Client Request Not Processed
CODESYS Forge
talk
(Post)
Hi, I have the same problem as the guys above. Any solution or hint in the right direction is appreciated. Codesys version 3.5.19.2, Lib version: 4.4.0.0. Thank you!
Last updated: 2024-05-29
Post by paro on General question about library versions
CODESYS Forge
talk
(Post)
I think you can use the newer versions. For a explanation from CODESYS, please read this post: https://www.codesys.com/the-system/versions-modularization.html
Last updated: 2024-05-29
Post by hjohnson123 on PLC Memory consumption?
CODESYS Forge
talk
(Post)
Hi, How can you access the <root> of the Linux system? I'm struggling with this as the code above results in an invalid handle, as it cannot access '/'.</root> I am using Control for Raspberry Pi for context. Thanks.
Last updated: 2024-06-05
Post by k2saki on Open dialog from ST previous to version 3.5.6
CODESYS Forge
talk
(Post)
Thanks, that helps me a lot, but I have a question about this. https://forge.codesys.com/forge/talk/Engineering/thread/d8839077a0/
Last updated: 2024-06-05
Post by totorovic on IO-LINK Package - new license model
CODESYS Forge
talk
(Post)
Thank you for your answer. Finally I don't confirm that it used to work before. It seems that the IO-link Package is needed is you want to configure the network, but you don't need it if you use generic IO-link devices.
Last updated: 2024-06-06
Post by kumareasu on Panasonic servo Softmotion project
CODESYS Forge
talk
(Post)
I would like to use panasonic servo with CoDeSys + CODESYS SoftMotion Axes (4)Article no. 2305000009. Could anyone can share the example as CoDeSys project.
Last updated: 2024-06-09
Post by installwhat on How to access to variable value through symbolic string name
CODESYS Forge
talk
(Post)
Maybe your question makes sense but I don't see it. Maybe you should rephrase and add a lot of detail
Last updated: 2024-06-13
Post by lmartin on Scripting - how to get the fixed compiler version from Project settings
CODESYS Forge
talk
(Post)
Hi I search the way to be able to get the fixed version of the compiler set in the Project settings via a python script. Anabody know how to do that?
Last updated: 2024-06-13
Post by andreag0 on How to access to variable value through symbolic string name
CODESYS Forge
talk
(Post)
Good to know. I am looking for some soluction to avoid PLC Handler and OPC-UA. Thank you.
Last updated: 2024-06-14
Post by ignat on [SOLVED] Safety EL6900 - SELC0012 Invalid number of connections[
CODESYS Forge
talk
(Post)
Hi kurvanov, could you please share the video you mentioned. I am struggling with basic data intechange between safety module and basic plc logic
Last updated: 2024-06-17
Post by ignat on SafetyApp - Exchange 8 bits from EtherCAT Safety Module to PLC mapping issue
CODESYS Forge
talk
(Post)
Hi transmin01, I am struggling with the same issue. Have you found out the solution?
Last updated: 2024-06-17
Post by kthomas on Cant login to Rpi4 but can see it in codesys communications settings.
CODESYS Forge
talk
(Post)
This is what I see in codesys window. And here is with the netstat command on the pi
Last updated: 2024-06-23
Post by eschwellinger on search runtime 4.9.0.0 for pi 3
CODESYS Forge
talk
(Post)
sorry I missed to say how to do this just update the runtime. (extract latest debian package out of the CODESYS package) but 8n this case an update all to the latest version including CODESYS is probably the easiest option now.
Last updated: 2025-10-26
Post by gcodejedi on The element of type 'VisuFbElemImage' could not be updated. Reason: Index was outside the bounds of the array.
CODESYS Forge
talk
(Post)
Hello, I am experiencing this exact same issue. Were you able to get yours resolved? If so, would you mind sharing the solution you discovered? Thanks!
Last updated: 2025-11-03
Post by davidbo on What is the prerequisites for a Raspberry Pi to work with SysSockSetIpAddressAndNetMask()
CODESYS Forge
talk
(Post)
I have done: systemctl stop dhcpcd sudo ip addr flush dev eth0 sudo ip link set eth0 up but a call to SysSockSetIpAddressAndNetMask does not give the eth0 an IP address Why?
Last updated: 2025-11-04
Post by kalmeyer on Stepper motor control with (SM_Drive_RaspStepper_direct)
CODESYS Forge
talk
(Post)
Is there perhaps a place where I can see examples of programming with different instructions? This would be a great help. Maybe there are some places where ready-made programs are posted that can be downloaded and tested? /Klaus
Last updated: 2025-11-10
Post by nano on conformation about the CODESYS Extends SL and CODESYS SDK
CODESYS Forge
talk
(Post)
as an oem i can tell you, extension sl isn't the sdk. its more an hard restricted part of it with much missing parts. why u may ask this?
Last updated: 2025-11-11
Post by jonasz on Deploy LicenseServer for Linux SL
CODESYS Forge
talk
(Post)
After carefully studying the documentation, I have a question: is a second hardware-independent time source required for the correct operation of the VirtualSafety system?
Last updated: 2025-11-17
Post by gseidel on STEPPER CODESYS SOFTMOTION_DRIVE
CODESYS Forge
talk
(Post)
Hi kalmeyer, I would recommend to have a look at these examples. They come with a project and a description: https://content.helpme-codesys.com/en/CODESYS%20SoftMotion/_sm_basic_examples_single_axis.html. Best regards, Georg
Last updated: 2025-11-28
Post by aldo on Access to the path *** is denied
CODESYS Forge
talk
(Post)
Hello, this has been happening to me too since I updated to SP21 Patch 4. It seems the problem is on my main computer (Desktop) but not on the laptop. Has anyone found the cause? Thanks
Last updated: 2025-12-10
Post by mil581 on Modbus TCP Server connection is ESTABLISHED but all holding registers are value 0?
CODESYS Forge
talk
(Post)
Hello everyone! I'm facing a weird issue with CODESYS Control Win V3 x64 on a fresh Windows install. The situation is as follows: CODESYS Modbus TCP Server (Slave) is running and I can see live values in the mapping display of Modbus settings: GVL (e.g., 32, 42, 50). Port 502 is LISTENING according to netstat. When connecting via Modbus Poll or Node-RED, the connection status changes to ESTABLISHED and everything reports as fine. The Problem: Despite the successful connection, all holding registers return 0 no matter what. It's like the OS accepts the TCP handshake, the request counter goes up but the data payload never reaches Modbus Client (in this case Node-RED or Modbus Poll). Quick Stats: Firewall: Completely OFF. Unit ID: Verified & Matching. IP: Tried 127.0.0.1 and 192.168.0.1. Interface: Correctly bound in Ethernet Device settings. I already tried absolutely everything from changing IP address, subnet, port, deleting the project and starting new one and even nuking my old Windows install. Since I am near completion of my bachelor thesis only thing left for me to do is connect SoftPLC to NodeRED via Modbus but this issue is driving me crazy for weeks. I do not know what to do anymore.
Last updated: 2025-12-25
To search for an exact phrase, put it in quotes. Example: "getting started docs"
To exclude a word or phrase, put a dash in front of it. Example: docs -help
To search on specific fields, use these field names instead of a general text search. You can group with AND or OR.