Post by aniket-b on Scara3 kinematic robot error ^{CODESYS Forge talk (Post)}
I am using Scara3 kinematic with EtherCAT PLC. The robot stops at the same place randomly after few cycles. Check attached image. I am getting SMC_ERROR.SMC_DI_FIELDBUS_LOST_SYNCRONICITY in all 3 axes.
Last updated: 2025-12-19

Post by paulpotat on cm4 runtime problem ^{CODESYS Forge talk (Post)}
Hello, We are having the same kind of problem again with the last CM4 we received : ooops... this runtime was built for RASPBERRYPI. Hardware version or firmware version not supported! (-18, 0x00000BB8, 0xFFFFFFFB) Hardware Version $ cat /proc/cpuinfo processor : 0 model name : ARMv7 Processor rev 3 (v7l) BogoMIPS : 126.00 Features : half thumb fastmult vfp edsp neon vfpv3 tls vfpv4 idiva idivt vfpd32 lpae evtstrm crc32 CPU implementer : 0x41 CPU architecture: 7 CPU variant : 0x0 CPU part : 0xd08 CPU revision : 3 processor : 1 model name : ARMv7 Processor rev 3 (v7l) BogoMIPS : 126.00 Features : half thumb fastmult vfp edsp neon vfpv3 tls vfpv4 idiva idivt vfpd32 lpae evtstrm crc32 CPU implementer : 0x41 CPU architecture: 7 CPU variant : 0x0 CPU part : 0xd08 CPU revision : 3 processor : 2 model name : ARMv7 Processor rev 3 (v7l) BogoMIPS : 126.00 Features : half thumb fastmult vfp edsp neon vfpv3 tls vfpv4 idiva idivt vfpd32 lpae evtstrm crc32 CPU implementer : 0x41 CPU architecture: 7 CPU variant : 0x0 CPU part : 0xd08 CPU revision : 3 processor : 3 model name : ARMv7 Processor rev 3 (v7l) BogoMIPS : 126.00 Features : half thumb fastmult vfp edsp neon vfpv3 tls vfpv4 idiva idivt vfpd32 lpae evtstrm crc32 CPU implementer : 0x41 CPU architecture: 7 CPU variant : 0x0 CPU part : 0xd08 CPU revision : 3 Hardware : BCM2711 Revision : a03141 Serial : 1000000097594db7 Model : Raspberry Pi Compute Module 4 Rev 1.1 Kernel Version $ uname -a Linux cmr-pv2-1t00-0001 6.12.25-rt9-v7l #1 SMP PREEMPT_RT Thu Sep 25 11:53:00 CEST 2025 armv7l GNU/Linux OS Version $ cat /etc/os-release PRETTY_NAME="Raspbian GNU/Linux 12 (bookworm)" NAME="Raspbian GNU/Linux" VERSION_ID="12" VERSION="12 (bookworm)" VERSION_CODENAME=bookworm ID=raspbian ID_LIKE=debian HOME_URL="http://www.raspbian.org/" SUPPORT_URL="http://www.raspbian.org/RaspbianForums" BUG_REPORT_URL="http://www.raspbian.org/RaspbianBugs" CodeSys runtime 4.13.0.0 So far we tested runtime versions up to 4.18.0.0, here are the results : * 4.13.0.0 --> Not working ❌ * 4.14.0.0 --> Not working ❌ * 4.15.0.0 --> Not working ❌ * 4.16.0.0 --> Not working ❌ * 4.17.0.0 --> Working ✅ * 4.18.0.0 --> Working ✅ There is nothing in the 4.17.0.0 release note that mentions that, so I'm not sure what to think about this. Is this a known problem within the CodeSys development team ? If yes, how do you follow CM4 hardware evolutions ? Is there a way of making this work without having to update the runtime version ? We have several products working with the 4.13.0.0 runtime and we would like to avoid having to update them all. BR
Last updated: 2026-02-02

Verbindung zw. Codesys V2.3 und Codesys HMI SL ^{CODESYS Forge talk (Thread)}
Verbindung zw. Codesys V2.3 und Codesys HMI SL
Last updated: 2021-10-20

Post by andrej on Threads and TID created by CODESYSControl Win V3 ^{CODESYS Forge talk (Post)}
Hi all, for a deeper understanding of the Codesys RTE - I created a simple application with 3 IEC tasks (Ta,Tb,Tc) each with different priorities, and different cycle times. The application runs on Windows 10 in the Soft PLC CODESYS Control Win V3. If my understanding is correct, the RTE i.e. the Process CodesysControlService should spawn 3 threads (Th_a,Th_b,Th_c) which are executed with the defined cycle times, the priority of the threads should reflect the priority of the task set in the Codesys IDE. Does somebody have an idea, how I could identify the respective threads in Windows? Kind regards Andrej
Last updated: 2023-10-02

Post by mtnkyr on Ethercat Master ^{CODESYS Forge talk (Post)}
Hi everyone, I am working on a 3 axes Cartesian robot. I take control of all the axes. In the Ethercat connection, the drive sequence is the same as in the program. For example, in the current program the order is as follows. 1. Axis_Z 2. Axis_X 3. Axis_Y Communication Diagram PLC->Drive_Z->Drive_X->Drive_Y When I try to change the order in the program while keeping the communication diagram the same, there is an axis drive mismatch. How can I fix this?
Last updated: 2024-10-22

Post by jari-koivuluoma on Finding out exception code position ^{CODESYS Forge talk (Post)}
Is it possible to find out the code position from where the exception originated using information from this log entry? 2025-07-02T13:56:19Z, 0x00000011, 8, 81, 3, #### Exception: *EXCEPTION* [<excpt>AccessViolation</excpt>] occurred: App=[<app>Application</app>], Task=[<task>Task</task>] 2025-07-02T13:56:19Z, 0x00000011, 8, 81, 3, #### Exception: *SOURCEPOSITION* App=[<app>Application</app>] area=<area>2</area>, offset=<off>13349868</off>
Last updated: 2025-07-02

Post by paulpotat on Project size increasing continuously ^{CODESYS Forge talk (Post)}
I still have the same problem with Codesys 3.5 SP18. Initially, my project is ~5 Mo. I work on it for like 3-4 days and it goes up to ~10Mo. If I make an export of the project and import it in a new empty project, it goes back to approximately 5 Mo. Why is it doing this ?
Last updated: 2023-08-23

Post by eschwellinger on Correct CAN Driver for EL6751 ^{CODESYS Forge talk (Post)}
Hi, for Control Win : add CmpEL6751CanDrv in the c:\ProgramData\CODESYS\CODESYSControlWinV3x64\E1FA7ABE\CODESYSControl.cfg [ComponentManager] Component.1=CmpTargetVisuStub Component.2=CmpWebServer Component.3=CmpWebServerHandlerV3 Component.4=SysCpuMultiCore Component.5=SysReadWriteLock Component.6=SysCpuBreakpoints Component.7=SysPipeWindows Component.8=CmpEL6751CanDrv for Linux SL or Pi or any ARM device - I think it is already static loaded as component - see plclogger on startup
Last updated: 2023-09-20

Post by suyash on Version Control ^{CODESYS Forge talk (Post)}
Hello, I face issues opening old Codesys 3 program when I am having a newer version installed. Unfortunately since I was forced to format my laptop after an unexpected crash. I lost all the setup files of the older versions. Is there ant where I can download it from? BR, Suyash
Last updated: 2025-03-07

Post by rickwot809 on Codesys Soft PLC OPC UA server ^{CODESYS Forge talk (Post)}
Enabling Anonymous Login 1. Navigate to 'Device' > 'Communication Settings' > 'Device'. 2. Next, click on 'Change Runtime Security Policy'. 3. In the new window, find and check the box for 'Allow anonymous login'. After completing these steps, you should be able to communicate with the OPC UA server.
Last updated: 2025-09-11

Post by manuknecht on High Cycle Times for SoftMotion_PlanningTask when using AxisGroup ^{CODESYS Forge talk (Post)}
Hi These issues occured using a Raspberry Pi 4. I also repeated the experiment with codesys control for Windows, which results in much lower cycle times. With up to 3 ms, I still think they are fairly high given they should run at 2 ms and don't require complicated kinematics. The effect of higher cycle times for slower movements also prevails.
Last updated: 2024-03-13

Post by vtec35 on search runtime 4.9.0.0 for pi 3 ^{CODESYS Forge talk (Post)}
Hello everyone, following corrupted data on the SD card of our Pi3B+ provided with a machine, we reinstalled a CODESYS image for Raspberry Pi, but we cannot find the 4.9.0.0 runtime that is compatible with the project. Currently, the machine is on 4.1.0.0, and we tried a more recent version 4.13.0.0, but there are error messages. Thanks in advance.
Last updated: 2025-10-24

Post by bertram on Installation IOT Libraries kann nicht installiert werden ^{CODESYS Forge talk (Post)}
IOT Package SL 1.12.0.0 läst sich nicht Installieren da keine Installation gefunden wurde in die die das Package installiert werden kann. Windoof 11 Installer 2.5.0 Codesys V3.5 SP21 Patch 3+ 64 Bit. Hat jemand einen Rat für mich ? Bin um jeden Tip dankbar. herzliche Grüße an alle.
Last updated: 2025-11-25

Post by peteryapab on Login Screen to small for 10" screens ^{CODESYS Forge talk (Post)}
Hi! I hade made a visualization within Codesys V3.5 SP21 Patch 3, where i call for the user management and login. The VisuUserManagement.VMU_Login and VisuUserManagement.VMU_Login2 are to small for the screen it looks good and works fine if you are on a computer with large scrren but gets finicky on the smaller screen. any ide´s how to make the login dialog bigger?
Last updated: 2026-02-01

Post by timvh on CODESYS: Combining Master Redundancy with EtherCAT Ring Topology – Is it Supported? ^{CODESYS Forge talk (Post)}
Yes, this works (at least we have it running with Wago PLC and Beckhoff I/O), but the concept works. You need 2 PLC's with at leat 3 network interfaces. And 2 switches (can be unmanaged). See the attached simple diagram for the solution.
Last updated: 2026-02-05

Post by struccc on Backtick identifiers ^{CODESYS Forge talk (Post)}
Important: ` - Backtick - ASCII 96 ' - Apostrophe or Single Quote - ASCII 39 In the online help for some reason it renders ’ ... The only issue I don't get, why identifiers are still case-insensitive, even within `backtricks`? `mPa` and `MPa` for milli-, mega Pascal are the same identifiers, unfortunately... Is this a bug or a feature? Otherwise can do pretty nasty things with it: // A practical (?) ASCII table served as crazy strict enumeration // Just for hangover Monday mornings {attribute 'qualified_only'} {attribute 'strict'} TYPE ASCII : ( NULL := 16#00, START_OF_HEADING := 16#01, START_OF_TEXT := 16#02, END_OF_TEXT := 16#03, END_OF_TRANSMISSION := 16#04, ENQUIRY := 16#05, BELL := 16#06, ACKNOWLEDGE := 16#07, BACKSPACE := 16#08, HORIZONTAL_TAB := 16#09, LINE_FEED := 16#0A, VERTICAL_TAB := 16#0B, FORM_FEED := 16#0C, CARRIAGE_RETURN := 16#0D, SHIFT_OUT := 16#0E, SHIFT_IN := 16#0F, DATA_LINK_ESCAPE := 16#10, DEVICE_CONTROL_1 := 16#11, DEVICE_CONTROL_2 := 16#12, DEVICE_CONTROL_3 := 16#13, DEVICE_CONTROL_4 := 16#14, NEGATIVE_ACKNOWLEDGE := 16#15, SYNCHRONOUS_IDLE := 16#16, END_OF_TRANS_BLOCK := 16#17, CANCEL := 16#18, END_OF_MEDIUM := 16#19, SUBSTITUTE := 16#1A, ESCAPE := 16#1B, FILE_SEPARATOR := 16#1C, GROUP_SEPARATOR := 16#1D, RECORD_SEPARATOR := 16#1E, UNIT_SEPARATOR := 16#1F, ` ` := 16#20, `!` := 16#21, `$"` := 16#22, `#` := 16#23, `$$` := 16#24, `%` := 16#25, `&` := 16#26, `$'` := 16#27, `(` := 16#28, `)` := 16#29, `*` := 16#2A, `+` := 16#2B, `,` := 16#2C, `-` := 16#2D, `.` := 16#2E, `/` := 16#2F, `0` := 16#30, `1` := 16#31, `2` := 16#32, `3` := 16#33, `4` := 16#34, `5` := 16#35, `6` := 16#36, `7` := 16#37, `8` := 16#38, `9` := 16#39, `:` := 16#3A, `;` := 16#3B, `<` := 16#3C, `=` := 16#3D, `>` := 16#3E, `?` := 16#3F, `@` := 16#40, A := 16#41, B := 16#42, C := 16#43, D := 16#44, E := 16#45, F := 16#46, G := 16#47, H := 16#48, I := 16#49, J := 16#4A, K := 16#4B, L := 16#4C, M := 16#4D, N := 16#4E, O := 16#4F, P := 16#50, Q := 16#51, `R ` := 16#52, `S ` := 16#53, T := 16#54, U := 16#55, V := 16#56, W := 16#57, X := 16#58, Y := 16#59, Z := 16#5A, `[` := 16#5B, `\` := 16#5C, `]` := 16#5D, `^` := 16#5E, `_` := 16#5F, `agrave`:= 16#60, `a` := 16#61, `b` := 16#62, `c` := 16#63, `d` := 16#64, `e` := 16#65, `f` := 16#66, `g` := 16#67, `h` := 16#68, `i` := 16#69, `j` := 16#6A, `k` := 16#6B, `l` := 16#6C, `m` := 16#6D, `n` := 16#6E, `o` := 16#6F, `p` := 16#70, `q` := 16#71, `r` := 16#72, `s` := 16#73, `t` := 16#74, `u` := 16#75, `v` := 16#76, `w` := 16#77, `x` := 16#78, `y` := 16#79, `z` := 16#7A, `{`{} := 16#7B, `|` := 16#7C, `}` := 16#7D, `~` := 16#7E, DEL := 16#7F ) BYTE; END_TYPE
Last updated: 2025-11-05

Post by paro on Modbus Client Request Not Processed ^{CODESYS Forge talk (Post)}
Hi, Problem in your code is that you are not calling the ClientFb cyclic. Please look at the Example from CODESYS: https://forge.codesys.com/prj/codesys-example/modbus/home/Home/ Your code works if the client fb is called cyclic! IF NOT initDone THEN initDone := TRUE; // configure clientTcp clientTcp(aIPaddr:=Ethernet.IPAddress, uiPort:=502); // configure clientSerial clientSerial(iPort:=SysCom.SYS_COMPORT2, dwBaudRate:=SysCom.SYS_BR_115200, byDataBits:=8, eParity:=SysCom.SYS_EVENPARITY, eStopBits:=SysCom.SYS_ONESTOPBIT, eRtuAscii:=ModbusFB.RtuAscii.RTU); // configure clientRequestReadCoils_1 clientRequestReadCoils_1(rClient:=clientTcp, uiUnitId:=42, udiTimeout:=TO_UDINT(T#10MS)); // configure clientRequestWriteSingleRegister clientRequestWriteSingleRegister(rClient:=clientTcp, uiUnitId:=43, udiTimeout:=TO_UDINT(T#10MS)); // configure clientRequestReadCoils_2 clientRequestReadCoils_2(rClient:=clientTcp, uiUnitId:=44, udiTimeout:=TO_UDINT(T#10MS)); // configure clientRequestReadInputRegisters clientRequestReadInputRegisters(rClient:=clientTcp, uiUnitId:=44, udiTimeout:=TO_UDINT(T#10MS)); END_IF // call the client FB's clientTcp(); clientSerial(); // call client request FB's clientRequestReadCoils_1(rClient:=clientTcp, xExecute:=TRUE, uiStartItem:=2, uiQuantity:=3, pData:=ADR(aDataCoils_1[0])); // for more details see Example_TCP, especially ClientRequest control (xExecute, xDone, xError). IF clientRequestReadCoils_1.xDone THEN // get data from aDataCoils_1 ... END_IF clientRequestWriteSingleRegister(rClient:=clientTcp, xExecute:=TRUE, uiItem:=3, uiValue:=123); clientRequestReadCoils_2(rClient:=clientTcp, xExecute:=TRUE, uiStartItem:=2, uiQuantity:=3, pData:=ADR(aDataCoils_2[0])); clientRequestReadInputRegisters(rClient:=clientTcp, xExecute:=TRUE, uiStartItem:=16, uiQuantity:=3, pData:=ADR(aDataInputRegisters[0]));
Last updated: 2024-05-29

Post by martinlithlith on Relay board / relays for raspberry pi 3 b+ ^{CODESYS Forge talk (Post)}
hi! im planning a project on a raspberry with Codesys. For this I'll need a number of relays to control heating and fans, all a max of 24v and about 2a. How would i know if the board / relays i buy will be working with Codesys? Does every hat work or does it need a library/driver? is there a list of drivers/libraries created? as this is a hobby project all tips on a relay board or single boards that works with codesys and not to expensive are very welcome.
Last updated: 2023-09-03

Post by rtlman on Scan devices hangs CODESYS ^{CODESYS Forge talk (Post)}
Hello, I have a problem that randomly appeared today. When trying to scan a network adapter in "Deploy Control SL" the whole program hangs and needs to be restarted. I have been running "CODESYS v3.5 SP21 Patch 3" for a while and it has worked without any issues until now. I've tried upgrading to "CODESYS v3.5 SP21 Patch 4" with the same result. I've not made any system settings recently that im aware of which could cause this. Has anybody had similar a issue?
Last updated: 2025-12-12

Post by rringo on Function block not autofilling ^{CODESYS Forge talk (Post)}
I am attempting to place a block and make it an Analog sensor. When I go to change the name like in the instructional video on youtube it does not give me an option to autofill the block with a known configuration. This is a problem I have in Codesys 2.5 and 3.5. Did I mess up the install of the program or need to install a library? Any help would be appreciated. https://www.youtube.com/watch?v=PkJYQeIUmIM&t=136s at time mark 2:15ish The first image is what I can do and the second is what the videos function autofills to.
Last updated: 2023-08-24

Raspberry Pi to Codesys 2.3 ^{CODESYS Forge talk (Thread)}
Raspberry Pi to Codesys 2.3
Last updated: 2014-01-29

Getting Started With CoDeSys ^{CODESYS Forge talk (Thread)}
Getting Started With CoDeSys
Last updated: 2013-08-06

AWS IoT core CODESYS ^{CODESYS Forge talk (Thread)}
AWS IoT core CODESYS
Last updated: 2023-12-06

AWS IoT core CODESYS ^{CODESYS Forge talk (Thread)}
AWS IoT core CODESYS
Last updated: 2023-12-06

AWS IoT core CODESYS ^{CODESYS Forge talk (Thread)}
AWS IoT core CODESYS
Last updated: 2023-12-06

Sort by relevance or date