Post by matthewkim on Codesys Gateway not running ^{CODESYS Forge talk (Post)}
In my case, I used a different version of gateway. ex)3.5.18.5 sysTray gateway start did not work, so I terminated it and made it work with 3.5.18.3 in "codesys installer" "Settings" and was able to connect to the PLC.
Last updated: 2025-06-12

Post by matthewkim on Codesys Gateway not running ^{CODESYS Forge talk (Post)}
In my case, I used a different version of gateway. ex)3.5.18.5 sysTray gateway start did not work, so I terminated it and made it work with 3.5.18.3 in "codesys installer" "Settings" and was able to connect to the PLC.
Last updated: 2025-06-12

Post by s1mon on Two OneWireMaster on one Raspberry PI 5 ^{CODESYS Forge talk (Post)}
Thx for the hint. It works if I add following line to the .cfg file. PlaceholderFilePath.2=/sys/devices/w1_bus_master2, $OneWire2$ Is there a documentation how to modify this config file? Will this be overwritten if I do an update of the CodesysControl Runtime?
Last updated: 2025-06-13

Post by tk096 on SMC_ReadNCFile2 is always busy ^{CODESYS Forge talk (Post)}
Hi, do you process the sentences subsequently? If not, the function block fills the sentences (queue) and waits for the sentences to be processed, so that new sentences can be read and filled to the queue.
Last updated: 2025-06-17

Post by milan-svarny on Redundancy problem - primary PLC suddenly goes to simulation state ^{CODESYS Forge talk (Post)}
Hi Ivanmaltar, please , did you solve the problem? i have the same case. Second PLC is going suddenly to Sim. state Thank you
Last updated: 2025-06-18

Post by eschwellinger on How to download dependencies packages for CODESYS Control for Raspberry Pi SL ? ^{CODESYS Forge talk (Post)}
with latest version? 4.16.0.0? Use the CODESYS Installer to download all required packages if you need an offline installation
Last updated: 2025-06-24

Post by ben1 on Login to Visu optional ^{CODESYS Forge talk (Post)}
It sounds like you are trying to use the device user management, but you can use the visu user management found in the Visu Manager for this.
Last updated: 2025-07-10

Post by gvdb on Raspberry Pi 4 mod B icm codesys linking USB serial device (arduino) to com port ^{CODESYS Forge talk (Post)}
Raspberry Pi 4 Codesys 3.5.20 sp3 Codesyscontrol 4.15.0.0 based on sdk 3.5.21.0 Hi all, I have found a lot of topics but none of them get me on the right path, therfore i started a new post. Usually i work with plc based systems and codesys but now im trying to create an project where i read out a serial data stream from an arduino connected by an USB port. in the future this need to be more arduino's but first trying to make it work with one I had my program working but i needed to update my raspberry pu to the letest version to get the mimo screen working. Now i tried several rules in the CODESYSControl.cfg and/or CODESYSControl_User.cfg files but i never get the com port opened. At this moment i have an file CODESYSControl_User.cfg with entry: [SysCom] Linux.Devicefile.1=/dev/ttyUSB0 I tested the connection with minicom and the data runs fluently. Can somebody help me with what could be wrong? the com port states ERROR_UNKNOWN 5004 when i tried to open.
Last updated: 2025-07-17

Post by arwie on Use MC_Home without enabling the drive for homing method 35 ^{CODESYS Forge talk (Post)}
So we pay 380€ for SoftMotion licenses for each robot, but have to implement such an obvious use case manually without any hint in the official documentation how to achieve this. This is crazy...
Last updated: 2025-07-31

Post by bruceae on Allen Bradley to Codesys conversion ^{CODESYS Forge talk (Post)}
Hello Everyone, I was hoping to get some assistance or general directions on the codesys equivalent of some Studio 5000 commands and data types; Data Types; SCK_TCP Commands; CPS
Last updated: 2025-08-08

Post by alexanderraab on EtherCAT: How to change station-alias/ Slave address ^{CODESYS Forge talk (Post)}
Hello, i have the same situation to change the Station-Alias adress online by IEC-Code. Have someone an exsample for that?
Last updated: 2025-08-13

Post by davidbo on SQLite with AC_Datalog and Raspberry Pi ^{CODESYS Forge talk (Post)}
I am using V3.5 SP20 and version for AC_Datalog is 4.3.0.0 But in the log I get "DataLogStorage_SQLite: Not able to open table." Why and how to fix that?
Last updated: 2025-08-14

Post by jonasz on TargetVisu not accepting touch inputs ^{CODESYS Forge talk (Post)}
So, in my case, the solution is to uncheck the option to support client animation and overlay native elements. Visualisation Manager -> Settings -> General Settings
Last updated: 2025-08-19

Post by jonasz on TargetVisu not accepting touch inputs ^{CODESYS Forge talk (Post)}
This solution did not give me peace of mind, so I decided to check other options again, especially since artifacts appear on some controls in WebVis. The solution is to enable the Multitouch handling option in the additional settings tab.
Last updated: 2025-08-21

Post by wagokurt on CODESYS Visualization M License Fails to activate on Linux SL ^{CODESYS Forge talk (Post)}
I have successfully activated a CODESYS Control Performance M on a Linux IPC. When I try to activate the CODESYS Visualization M license it fails with this error. Any ideas? This is a WAGO 752-9401 FW4, running Debian 12.
Last updated: 2025-08-21

Post by wagokurt on CODESYS Visualization M License Fails to activate on Linux SL ^{CODESYS Forge talk (Post)}
This is what is on the device, is this correct? I did not see an option to install TargetVisu, is this needed?
Last updated: 2025-08-21

Post by timvh on Where to find the OPC-UA Information Model Repository ^{CODESYS Forge talk (Post)}
I'm not sure, but maybe you need to install or update the "CODESYS Communication" add-on through the CODESYS Installer.
Last updated: 2025-08-26

Post by gatto on Application-based license Modbus Channels ^{CODESYS Forge talk (Post)}
Hi Sandro, did you find any solution? I'm in version 3.5.20.40 and i have only one modbus channel. I don't want the problem to happen to me if I do an update one day.
Last updated: 2025-09-01

Post by eschwellinger on CODESYS control on RPi starts, shortly runs, then exits ^{CODESYS Forge talk (Post)}
in case you are using latest hw revision, there have been added some mac adresses - for the 4.17.0.0 release this might solve it. If not we need to investigate deeper. If it is application related you need to check the plclogger.
Last updated: 2025-09-02

Post by pernockham on Pointer/reference to Codesys trend recording object? ^{CODESYS Forge talk (Post)}
I have a Hmi that acts as an interface for many (mostly identical) units. This is managed by a sort of "mux" where you select which unit that should be presented on the HMI. Backbone is solved by a HMI-gvl defined as reference/pointer to "unit-data", which then can be set to the individual units. While this works for most data I still have not sorted how to solve this for the trend recordings. One solution would be to have already "mux:ed" data values as source for the/one trend. However then the trend would contain data from different units/sources which could/will cause confusion. If its possible to "clear" this can be mitigated. Possibly let the trend have its own "mux-selector" (ie, the hmi are focusing on unit#3 however trend data is locked on unit#5), that could also work.. Or, let each unit have its own trend recording, which is focused if the unit is "selected". Can I reach the trend recording objects programmatically (those defined in the device tree)? Ie, can I use a "reference/pointer to these trend recording objects"? There is a field "data source" in the trend properties dialog which seems to resemble what Im looking for? But Im not sure if I can use it in some way, I cannot change anything in this field it only says <local application="">. </local>
Last updated: 2025-09-16

How to correctly create a device descriptor (.devdesc.xml) for a custom Linux ARM64 PLC in CODESYS 3.5.21.20? ^{CODESYS Forge talk (Thread)}
How to correctly create a device descriptor (.devdesc.xml) for a custom Linux ARM64 PLC in CODESYS 3.5.21.20?
Last updated: 2025-10-07

Post by reinier-geers on JSON (WString format) accessing elements. Convert to STRUCT? ^{CODESYS Forge talk (Post)}
HI , Ill try the same with Energy prices. But no data I add the Query to the wsPost. Add $ because wstring use "as start end end. Here the link of the API info https://reversed.notion.site/Marktprijzen-API-89ce600a88ac4abe8c2ad89d3167a83e
Last updated: 2025-10-09

Post by reinier-geers on JSON (WString format) accessing elements. Convert to STRUCT? ^{CODESYS Forge talk (Post)}
HI , Ill try the same with Energy prices. But no data I add the Query to the wsPost. Add $ because wstring use "as start end end. Here the link of the API info https://reversed.notion.site/Marktprijzen-API-89ce600a88ac4abe8c2ad89d3167a83e
Last updated: 2025-10-09

Post by matteodigani on Add library .dll to project codesys. ^{CODESYS Forge talk (Post)}
Is there a way to import an external library made with c++/CLI or python? then call the function that i have made inside the program POU ?
Last updated: 2025-10-15

Why I need empty the FB to reset them? Even it's I created and there not a empty logic ^{CODESYS Forge talk (Thread)}
Why I need empty the FB to reset them? Even it's I created and there not a empty logic
Last updated: 2023-02-14

Sort by relevance or date