Post by dhumphries on CFC Toggle Function ^{CODESYS Forge talk (Post)}
I'm not sure I understand what you're asking, but I don't believe a function block with this behavior exists in the default libraries. I think the best solution would be using multiple and/or blocks or make your own function block.
Last updated: 2024-04-28

Post by gseidel on AXIS_REF_SM3 Error Codes? ^{CODESYS Forge talk (Post)}
Hi SLUCodesys, dwErrorId is a drive specific error number. The drive documentation should be consulted to interpret it. (Note that you should use MC_ReadAxisError to read this error, see https://content.helpme-codesys.com/en/libs/SM3_Basic/Current/SM3_Basic/POUs/Diagnostics/MC_ReadAxisError.html. Accessing the internal variable will result in outdated values if the acis error is not mapped by PDO and is not recommended in general.) uiDriveInterfaceError holds errors of the SoftMotion driver for the drive. It is also an internal variable, not intended for direct access. It is intended for logging, the PLC log will contain the drive interface error, consisting of this number and an error text. My recommendation for handling axis errors in the CODESYS application: 1) Use MC_ReadStatus on the axis to find out whether it is in state Errorstop 2) If in Errorstop, there are two possibilities: an error reported by the drive (MC_ReadAxisError) or an error of the SoftMotion function blocks (output MC_ReadStatus.FBErrorOccured). 3) If there is no drive error, you can use SMC_ReadFBError https://content.helpme-codesys.com/en/libs/SM3_Basic/Current/SM3_Basic/POUs/Diagnostics/FBError/SMC_ReadFBError.html Best regards, Georg
Last updated: 2025-09-24

Post by opineiro on Stack overflow with really simple function ^{CODESYS Forge talk (Post)}
Hi, I have an issue with a function which sends a message through API Rest. I'm using a function from httpCLient library. I have tested this function inside a program and it works fine. But when I want to use it inside a function (so I can call it simultaneously from 2 different points on the main program) it gives a stack overflow error. In detail it says: "C0297 Stack Overflow on Main Task. Stack sizes... Call hierarchy:" I have simplified as much as I can the function, but I'm hitting a wall with this. Anybody has an idea of what's wrong? Thanks!
Last updated: 2024-09-16

Post by e13740e on Сalling the context menu from the keyboard ^{CODESYS Forge talk (Post)}
Hello. I have a question for you, perhaps you have an answer to it. Regarding calling the Context menu from the keyboard in Devices, specifically calling the context menu window from the keyboard via an assigned combination. Goal: to have the ability to navigationally add internal Objects (Methods, Properties) to Function Blocks from the keyboard without using the mouse. The Codesys environment interface does not allow Windows access to this via Shift+F10. Externally (outside the Codesys environment), the hotkey call for the context menu (Shift+F10) from the keyboard works in various environments, but at the same time, in Codesys it does not (it doesn't work). I have already tried various options on my own to achieve this (but unsuccessfully): Tools\Customize\Keyboard\Objects (the set combination does not give the desired result) Tools\Customize\Keyboard\Objects... (the set combination is extremely useful as it provides access to adding objects directly to Devices but does not provide the ability to add an internal object (Method/Property) to a Function Block). Thank you in advance for your help!!! P.S. I have already started trying to implement a script-based solution to call the context menu via AutoHotkey - by relocating the mouse cursor to the area of the navigational selection with a subsequent call of the context menu on it and relocating the mouse cursor back to its initial position. And in order not to "reinvent the wheel," I am writing this request to you!!!
Last updated: 2025-10-05

Post by e13740e on Сalling the context menu from the keyboard ^{CODESYS Forge talk (Post)}
Hello. I have a question for you, perhaps you have an answer to it. Regarding calling the Context menu from the keyboard in Devices, specifically calling the context menu window from the keyboard via an assigned combination. Goal: to have the ability to navigationally add internal Objects (Methods, Properties) to Function Blocks from the keyboard without using the mouse. The Codesys environment interface does not allow Windows access to this via Shift+F10. Externally (outside the Codesys environment), the hotkey call for the context menu (Shift+F10) from the keyboard works in various environments, but at the same time, in Codesys it does not (it doesn't work). I have already tried various options on my own to achieve this (but unsuccessfully): Tools\Customize\Keyboard\Objects (the set combination does not give the desired result) Tools\Customize\Keyboard\Objects... (the set combination is extremely useful as it provides access to adding objects directly to Devices but does not provide the ability to add an internal object (Method/Property) to a Function Block). Thank you in advance for your help!!! P.S. I have already started trying to implement a script-based solution to call the context menu via AutoHotkey - by relocating the mouse cursor to the area of the navigational selection with a subsequent call of the context menu on it and relocating the mouse cursor back to its initial position. And in order not to "reinvent the wheel," I am writing this request to you!!!
Last updated: 2025-10-05

Post by dhumphries on Execution Order of Function Blocks ^{CODESYS Forge talk (Post)}
Function blocks in a SFC are executed left to right, top to bottom, instructions in ST are executed from left to right top to bottom as well. I think you are asking about the execution of POUs although you use the name function block, I believe POUs are executed in the order they are shown under the main task.
Last updated: 2023-12-28

Post by anderson on function block output ^{CODESYS Forge talk (Post)}
so it is not possible for me to use the function blocks and through them I can select the digital outputs of the PLC so that pulses and direction are output, or some function block that does this reading and in it I can program the pulse and direction outputs for the drive?
Last updated: 2024-01-09

Post by thecolonel26 on How to use FB_Init with nested Function Blocks? ^{CODESYS Forge talk (Post)}
Delete ME
Last updated: 2023-08-31

Post by mubeta on Strange problem with the ‘MC_SetPosition’ function ^{CODESYS Forge talk (Post)}
No errors in any condition. The function terminate correctly with the 'done' bit. Now I leave the machine and I don't know when I will be there again. The assumption you made I had considered. The operational limits of the axis are all fit for purpose, and this function should operate virtually without even noticing the motion limits. In fact in practice with the axis at low speed the function corrects any numerical value of the position in the range 0 ... 360° without any problem whatsoever in a single PLC scan cycle.
Last updated: 2025-01-10

Post by tk096 on Tripod Delta Robot ^{CODESYS Forge talk (Post)}
Hi, Which function block do you use to command the movements?
Last updated: 2025-03-24

Post by anderson on function block output ^{CODESYS Forge talk (Post)}
o meu plc é o FCT640 CMZ
Last updated: 2024-01-12

Post by schnepper on Minor UI bug: cannot create SFC POU after creating a Function POU ^{CODESYS Forge talk (Post)}
After creating a Function POU, it is not possible to then create an SFC POU. Steps to recreate: * Create a new Function POU. SFC is not allowed for Functions, so SFC does not show in the Implementation language dropdown. * Click Add Object -> POU... Function is selected for Type. * Select Program * SFC is not present in the Implementation language dropdown
Last updated: 2024-05-23

Post by tk096 on Sm3_math ^{CODESYS Forge talk (Post)}
Hi, SM3_Math is actually an internal library of SoftMotion. You can use it. The only restriction is that there is no compatibility guarantee - meaning that POUs in the library may change their interface, get moved/renamed/removed... in future versions of SoftMotion.
Last updated: 2025-03-19

Post by nano on Functional block ^{CODESYS Forge talk (Post)}
u can use internal variables by passing it thru setter/getter. thats the way to go. for that add it by rightclick on fb and create propertie
Last updated: 2024-04-17

Post by vkira on Radio module on wago 750-8217 ^{CODESYS Forge talk (Post)}
Hello. Tell me how to connect to the internal radio module PLC 750-8217. I use the gsm sms_01 library. I don't understand how to connect. via com port? what's the address?
Last updated: 2024-05-06

Post by gseidel on MC_Phasing state explenation ^{CODESYS Forge talk (Post)}
Hi kenth1973, no, we do not have this kind of information on internal variables. iPhasingState has been removed and is no longer present in current versions of SoftMotion. Best regards, Georg
Last updated: 6 days ago

Post by mariusz997 on Visualisation - internal error ^{CODESYS Forge talk (Post)}
Hi - problem solved. I had 3 version of codesys on system and they didn't like each other. After uninstall all and install again only one version now everything is OK
Last updated: 2025-11-12

After un upgrade of "CODESYS Control for Raspberry Pi MC SL" from v4.7 to v4.9 SysFileOpen function stopped working ^{CODESYS Forge talk (Thread)}
After un upgrade of "CODESYS Control for Raspberry Pi MC SL" from v4.7 to v4.9 SysFileOpen function stopped working
Last updated: 2023-08-22

Post by sedoerr on Check For Open Dialogs On Client ^{CODESYS Forge talk (Post)}
You need to create a function around this function to check the dialogs you use in your program. That's the way i have done it.
Last updated: 2023-09-26

Post by felipemsgarcia on Axis EtherCAT address ^{CODESYS Forge talk (Post)}
Hello, I'd like to write some parameters to axes from inside a function block where I passed axis by reference, using ETC_CO_SdoWrite. Is it possible to get the device address from inside the function block? Please see example below. Thank you!
Last updated: 2025-03-06

Post by ken-san-sg on Function Block Method call from OPC UA Client ^{CODESYS Forge talk (Post)}
Hello, Is it possible to call mathod which is implemented in Function Block POU from OPC UA client?
Last updated: 2025-07-18

Can a table be used as an input to date and time variables on a function block diagram? ^{CODESYS Forge talk (Thread)}
Can a table be used as an input to date and time variables on a function block diagram?
Last updated: 2022-09-15

Why do I get C0434: Function block AbstractFunctionBlock is ABSTRACT and cannot be instantiated for a Reference? ^{CODESYS Forge talk (Thread)}
Why do I get C0434: Function block AbstractFunctionBlock is ABSTRACT and cannot be instantiated for a Reference?
Last updated: 2022-08-14

Can a table be used as an input to date and time variables on a function block diagram? ^{CODESYS Forge talk (Thread)}
Can a table be used as an input to date and time variables on a function block diagram?
Last updated: 2022-09-15

Function block that after 2 rising edge it gives a bool and resets every 3 seconds ^{CODESYS Forge talk (Thread)}
Function block that after 2 rising edge it gives a bool and resets every 3 seconds
Last updated: 2023-04-07

Sort by relevance or date