Post by t-roger on Beckhoff EL6652-0010 with Codesys ^{CODESYS Forge talk (Post)}
Hi, I have the same problem. Have you found a solution to this problem? t-roger
Last updated: 2025-03-20

Post by eschwellinger on SM3RaspiStepper 0.0.0.6 issue ^{CODESYS Forge talk (Post)}
I would expect that this is more or less Bookworm related - the GPIO access is different now - and need to be adapted
Last updated: 2025-03-21

Post by bkhazaei on BACnet ^{CODESYS Forge talk (Post)}
Hello. Is there an Example for BACnet IP Client in Codesys? An applicable example makes it pretty easy to understand.
Last updated: 2025-03-24

Post by bkhazaei on BACnet ^{CODESYS Forge talk (Post)}
Hello. Is there an Example for BACnet IP Client in Codesys? An applicable example makes it pretty easy to understand.
Last updated: 2025-03-24

Post by hemuv on Dialog Open ^{CODESYS Forge talk (Post)}
I'm programming an HMI for a machine. I want to log all the parameter's changes (used text field for displaying and changing) for particular User levels. Created a Numpad and want to log oldvalue and Newvalue on 'ok' Button press. To retrieve the oldvalue, i check if the dialogue opened is my Numpad, Then I retrieve the dialogue interface via GetDialogInterface(ADR(myNumpad)) --> numpadData.stVariableValue which contain my oldvalue and save it locally. Problem is sometimes i retrieve the data and sometimes not. Also observed when Numpad Dialogue is Opened, VisuDlgUtil_IsDialogOpen returns False in some cycles.Attached you will find my Project. please let me know what went wrong or if there is a better approach to collect old and New Value of a textfield. Thank you.
Last updated: 2025-03-26

Post by eschwellinger on CODESYS Installer does't open ^{CODESYS Forge talk (Post)}
please check the windows event log for errors. Try to install it again from the CODESYS store. stanalone setup CODESYS installer
Last updated: 2025-04-01

Post by damian177 on url String notation ^{CODESYS Forge talk (Post)}
Hi, How to initialize following url: https://mydomain.pl/api/rce-lte?$filter=doba eq '2025-03-18' in sURL : STRING variable ? regards
Last updated: 2025-04-04

Post by timvh on How to manage soft container licenses for (remote) multi units? ^{CODESYS Forge talk (Post)}
You need to activate an individual license (ticket number) for each device. THe hardware of each device is unique, so you cannot copy a soft container from one device to another. This license can be installed in a local (wibu - codemeter) soft container, or you could optionally activate it on a hardware (USB) key. The benefit of the key is that you can easily move it to another device, nor does it get lost when you replace parts of the hardware of the device or completely overwrite the image. See: https://store.codesys.com/en/codesys-key.html
Last updated: 2025-04-08

Post by dasch on Access to the path *** is denied ^{CODESYS Forge talk (Post)}
I got the same problem with 3.5.19.70. Any solutions here?
Last updated: 2025-04-09

Post by marks on Siemens G120X via Ethernet/IP ^{CODESYS Forge talk (Post)}
Does anyone know the internals of Codesys well enough to interpret the diagnostic string?
Last updated: 2025-05-13

Post by davcide on button-keyboard ^{CODESYS Forge talk (Post)}
hi i have codesys v3.5, i should associate a button to a keyboard key with the ladder code. can you help me
Last updated: 2025-05-14

Post by ulvis on CFC Pages Cut&Paste is not working at its best ^{CODESYS Forge talk (Post)}
In the CFC page oriendted editor, if I copy some elements consisting of an input connector, some connected logic and an output connector and then paste this on a another page then the pasted elements get inserted with an offset to the right so that the rightmost connector falls outside of the page, in the grey hatched area. So far so good. Then I mark all the elements and try to drag them into the correct placement, collectively. THIS IS NOT POSSIBLE! I only get the "forbidden" icon tooltip. One has to drag & drop the INDIVIDUAL elements to move the elements around. What am I doing wrong?
Last updated: 2025-05-15

Post by ulvis on CFC Pages Cut&Paste is not working at its best ^{CODESYS Forge talk (Post)}
In the CFC page oriendted editor, if I copy some elements consisting of an input connector, some connected logic and an output connector and then paste this on a another page then the pasted elements get inserted with an offset to the right so that the rightmost connector falls outside of the page, in the grey hatched area. So far so good. Then I mark all the elements and try to drag them into the correct placement, collectively. THIS IS NOT POSSIBLE! I only get the "forbidden" icon tooltip. One has to drag & drop the INDIVIDUAL elements to move the elements around. What am I doing wrong?
Last updated: 2025-05-15

Post by ulvis on CFC Pages Cut&Paste is not working at its best ^{CODESYS Forge talk (Post)}
In the CFC page oriendted editor, if I copy some elements consisting of an input connector, some connected logic and an output connector and then paste this on a another page then the pasted elements get inserted with an offset to the right so that the rightmost connector falls outside of the page, in the grey hatched area. So far so good. Then I mark all the elements and try to drag them into the correct placement, collectively. THIS IS NOT POSSIBLE! I only get the "forbidden" icon tooltip. One has to drag & drop the INDIVIDUAL elements to move the elements around. What am I doing wrong?
Last updated: 2025-05-15

Post by ulvis on CFC Cut & Paste not working at its best. ^{CODESYS Forge talk (Post)}
In the CFC page oriendted editor, if I copy some elements consisting of an input connector, some connected logic and an output connector and then paste this on a another page then the pasted elements get inserted with an offset to the right so that the rightmost connector falls outside of the page, in the grey hatched area. So far so good. Then I mark all the elements and try to drag them into the correct placement, collectively. THIS IS NOT POSSIBLE! I only get the "forbidden" icon tooltip. One has to drag & drop the INDIVIDUAL elements to move the elements around. What am I doing wrong?
Last updated: 2025-05-15

Post by eschwellinger on i2c master not running ^{CODESYS Forge talk (Post)}
for i2c you need to enable it by: sudo raspi-config interfaces.... then it will work
Last updated: 2025-05-19

Post by qkkk on Device Scan ^{CODESYS Forge talk (Post)}
Hello all, I have developed a custom I/O driver in CODESYS that communicates via a Unix Domain Socket. In my DeviceDescription.xml, I have set up the following: <scan supported="true"> <scanfbinstance fbname="IOScanDevice"> The goal is to allow the user to scan for connected I/O modules from the CODESYS GUI ("Scan for Devices") and automatically populate the device tree with detected submodules.</scanfbinstance></scan> The function block IOScanDevice is implemented in the driver library and added to the main device's FB instances. However, when I initiate the scan from the GUI, nothing appears to happen the function is not executed. Is there an example project or driver (open source or from CODESYS Forge) that demonstrates a working custom scan implementation?
Last updated: 2025-05-26

Post by dkugler on Reading a negative number ^{CODESYS Forge talk (Post)}
why not simply converting data type UINT to INT? Then avoid negative values with ... := MAX(0 , intTest); Good luck!
Last updated: 2025-05-28

Post by josealb2000 on Stweep license activation error ^{CODESYS Forge talk (Post)}
When trying to activate a brand new Stweep license I get error 104 on one softcontainer and error 260 on another softcontainer.
Last updated: 2025-06-02

Post by tk096 on Max lines of code, codesys CNC ? ^{CODESYS Forge talk (Post)}
Hi, is it possible to attach the project and g-code?
Last updated: 2025-06-03

Post by tk096 on Max lines of code, codesys CNC ? ^{CODESYS Forge talk (Post)}
Hi, this is a bug in CODESYS Softmotion. Due to this bug the size is limited to a maximum of 32767 elements. However, we recommend to use way smaller buffer sizes. You could use a small buffer (it should be big enough so that it does not run empty when the interpolator processes the elements). In the beginning you fill the buffer in PLC_PRG until it is full. Afterwards, you start the interpolator. The interpolator processes the elements and removes them as soon as it travels past them. In PLC_PRG you check whether new elements can be stored in the buffer (NOT QUEUE.bFull). If the buffer has space, you generate the next elements and add them to the buffer (SMC_AppendObj()). I hope this helps you.
Last updated: 2025-06-04

Post by pafarrell on Ethercat not running. ^{CODESYS Forge talk (Post)}
Were you able to fix this? I had a program with motion working (several actually) and now bus not running. I'm stuck!
Last updated: 2025-06-05

Post by laurits on Max lines of code, codesys CNC ? ^{CODESYS Forge talk (Post)}
I have now tried with larger segments, and everything seems to be working now, thank you.
Last updated: 2025-06-07

Post by s1mon on Two OneWireMaster on one Raspberry PI 5 ^{CODESYS Forge talk (Post)}
Hi, I want to use two OneWireMaster on a Raspberry Pi5. I'm running Codesys Control for Raspberry Pi 64SL V 4.15.0.0. Under Linux I've configured two GPIOs for 1w bus usage on GPIO4 and GPIO27. Under Linux both masters seem to work fine and I can readout both sensors connected to both GPIOs. The two masters are 'w1_bus_master1' and 'w1_bus_master2'. In Codesys I've configured to OneWireMasters with the corresponding file paths. But in Codesys the 2nd onewiremaster "w1_bus_master2" doesn't work. Status is showing "OnewireMaster : Not running" What am I doing wrong? Does Codesys on Raspberry support multiple OneWireMasters? Any help is appreciated.
Last updated: 2025-06-10

Post by s1mon on Two OneWireMaster on one Raspberry PI 5 ^{CODESYS Forge talk (Post)}
Hi, I want to use two OneWireMaster on a Raspberry Pi5. I'm running Codesys Control for Raspberry Pi 64SL V 4.15.0.0. Under Linux I've configured two GPIOs for 1w bus usage on GPIO4 and GPIO27. Under Linux both masters seem to work fine and I can readout both sensors connected to both GPIOs. The two masters are 'w1_bus_master1' and 'w1_bus_master2'. In Codesys I've configured to OneWireMasters with the corresponding file paths. But in Codesys the 2nd onewiremaster "w1_bus_master2" doesn't work. Status is showing "OnewireMaster : Not running" What am I doing wrong? Does Codesys on Raspberry support multiple OneWireMasters? Any help is appreciated.
Last updated: 2025-06-10

Sort by relevance or date