Post by hbuitrago on CmpIecTask-program loaded exception ^{CODESYS Forge talk (Post)}
I'm facing an error that show on the codesys and the PLC that dont let either the PLC run or access it using the remote software, Error: program loaded exception Log: exception position:IP=0x0xfffffffe (no IEC context could be retrieved) component: CmpIecTask exception [accessviolation] ocurred: APP=[application], Task=[Task] POU changed, that inhibits an online change, Plase let me know if there is a solution for this issue, Best regards,
Last updated: 2024-09-06

Post by paulpotat on cm4 runtime problem ^{CODESYS Forge talk (Post)}
Hello again, After looking into it, I noticed that the release note of "CODESYS Control for Raspberry PI 4.13.0.0" mentions a bug fix titled "Support Compute module 4". Is it possible to have more details about this fix from the CodeSys team please ? Because I have several CM4 boards with the same hardware revision / OS but some of them works with the 4.10 runtime and others only works with the 4.13 runtime...
Last updated: 2024-09-09

Post by docker on Webvisu client connection monitoring ^{CODESYS Forge talk (Post)}
Hi mate, With this snippet i was able to see the lastusage variable count, but it would not iterate between clients? i was only able to access the data of the target visu. it threw an error with the array of pointers stating it was not able to convert etc. also when i tried it with the while loop it created an endless loop and crashed the program. any ideas? Thankyou
Last updated: 2024-09-10

Post by trprsmn on "Scan Network" doesn't find CR1140 device (ifm) ^{CODESYS Forge talk (Post)}
Hi, I'm watching an ifm tutorial on how to setup an industrial controller in CODESYS. I'm using an 'ecomatDisplay43inch_64bit) controller. CODESYS Gateway and PLC are both runngin (systray). However if I click "Scan Network" I can't find my controller. The only thing it finds is a "desktop" it seems (I'm using a Windows 10 on a Mac Book using VMWare, so maybe it has something to do with that?). How can I fix this? Thanks in advance!
Last updated: 2024-09-11

Post by dkugler on TargetVisu Freezing ^{CODESYS Forge talk (Post)}
The only weird situation i remeber with particular or complete frozen target visu was after the rtc clock was fallen or set back to the past. It looked like after running a while the alarm history database crashed during writing entries at a date lot of years in the past. After setting the rtc clock to actual date/time and deleting the alarm db every thing worked fine. I don't know, if this is/was a problem of our PLC hardware/firmware? Maybe check date/time at your system?
Last updated: 2024-09-13

Post by jinlee on Camera RTSP Feed ^{CODESYS Forge talk (Post)}
Hi, I followed your guidance and used go2rtc. There is a link generated from go2rtc I can copy into the web browser element in the visualisation. It somehow only appear within the software when it is running, but not on the webvisu. I want to display the camera feed onto the webvisu. My camera is reolink 810a which supports IP protocol. My project is pretty simple, just a web browser element with assigned URL.
Last updated: 2024-09-17

Post by dkugler on EThercat Dynamic configuration ^{CODESYS Forge talk (Post)}
I can confirm that at my 4ms EtherCAT Master the frames per second is equal at round about 500 with Codesys SP19. The same program at SP16 it was at 380-430 f/sec. for me it will be interesting too, whats the reason is for this high frame count/sec? I havn't had the time to use a paket sniffer and analyse all the frames. I can't help with your other questions, sorry.
Last updated: 2024-09-19

Post by george32 on Readable IO names ^{CODESYS Forge talk (Post)}
Hello Folks, I have a quite basic understanding of how PLC programming works. However I keep getting stuck on 1 problem I could not get my head around. The problem is as follow: I have a PLC with 60 IO (20 inputs, 40 outputs). Each IO is defined as a function block. Furthermore I have an external IO card connected trough a CanBus connection. This IO card has 4 analog input channels (USINT), 4 digital inputs (Bool) and 4, digital outputs (Bool) Because I have 2 different components which both has data have I made 4 arrays to store the data off every component in one variable. PLC_Input: Array [1..20] of BOOL; PLC_Output: Array [1..40] of BOOL IOCard_Input: Array [1..8] of BOOL IOCard_Output: Array [1..4] of BOOL Because the control and reading of the different in and outputs is done by a TCP connection I want to use some kind of enumeration or struct to give each index a name so that my main would be a little bit more readable instead of all the magic numbers. Also this would make my program more dynamic for the furter in case I need to changes some in the IO nummers. For example: pump is placed on the fysical terminal strip number place 54, which is the 3th output of the IO card in the program: if I am sending a message with value 54 I would like to control IOCard_Output[3]. If there is a solution or methode to get this done, I can eventually do the following in my main program: IOCard_Output[Pump]. I have tried the following: IOCard_Output[Pump - 51] with an enumration but this keeps raising an error I hope some of you could help me further with this problem. In gross lines: I want to couple all the different IO to a more readable name and this readable name should control the right Array index Thanks in advance, George
Last updated: 2024-09-26

Post by garmusd on Raspberry Pi 5 GPIO not working. ^{CODESYS Forge talk (Post)}
I paid money for the RPi runtime because the Product Description says that GPIO is supported. It is also written in the Versions that since 4.11 RPi5 is supported. And I use 4.13. Nowhere is it mentioned that GPIO is still not supported... It's a pity that the Codesys developers still can't find a way to fix it. Are there plans for when it will be fixed or are the developers too weak? Just wondering, is there anyone with a working GPIO? Can you share the details of your system?
Last updated: 2024-09-27

Post by vstrom on Recipe definition, how to have the Name string in current language? ^{CODESYS Forge talk (Post)}
I'd like to know if it is possible to have the "Name" field, in the recipe definition, language dependent. Something like to have the possibility to put there a string ID that will be add to the GlobalTextList. In this way it can be translated and when showed in a Visualization screen its value depend on the current language. Thanks.
Last updated: 2024-10-04

Post by paulpotat on Can't open license manager with raspberry CM4 ^{CODESYS Forge talk (Post)}
Hello eschwellinger, Thanks for your answer, with this I was finally able to make it work by doing the following : install CODESYS Control for Linux ARM SL v4.13.0 uninstall CODESYS Control for Linux ARM SL v4.13.0 and make sure to select "yes" when prompted to uninstall WIBU CodeMeter Lite Runtime (v8.10.6230.501) re-install "CODESYS Control for Raspberry Pi SL" v4.13.0 It looks like the issue was probably related to the CodeMeter Runtime ? Best regards
Last updated: 2024-10-16

Post by xabier on Problem Update new version Master ethercat ^{CODESYS Forge talk (Post)}
@eschwellinger...How can migrate to the new version if i can´t do it??? The project generate with CODESYS DEvelopmentsystem Version=3.5. SP16 Path9 ...I want open with my version 3.5 SP19 Patch 4...I can´t update the my last version of master ethercat(4.4.0.0) and is not possible. My situation is not the comment tell you ...my situation is impossible upadte new version of master ehtercat if you create the project with older version. Have you got a idea? Can you help me please?
Last updated: 2024-10-29

Post by jddaigle on TargetVisu controls are incorrectly positioned ^{CODESYS Forge talk (Post)}
Hello, I'm trying to run TargetVisu on my Linux IPC, and while it does work, the controls are misaligned compared to my WebVisu. Both visualizations are full-screen on a Debian 12 VM with a resolution of 1280x768. The WebVisu is running in Firefox. Are there any configuration I should adjust to ensure the controls align properly between the two? Any guidance or troubleshooting tips would be greatly appreciated! Thank you.
Last updated: 2024-11-03

Post by warrumungi on Opening a Dialog on a specific Client from ST ^{CODESYS Forge talk (Post)}
Hi Thanks, Manuel, for providing this solution and insight. I too had exactly the same problem as you did. While I did implement a custom filter, I'd also like to point out what jinlee mentioned above...I see no reference to VU.PublicVariables.Clients.Current anywhere?? In my case I only needed to show a dialog on a "master" client, not all the clients, so I filtered by IP address to do this.
Last updated: 2024-11-05

Post by pixsys on Webvisu cliënt responsiveness ^{CODESYS Forge talk (Post)}
Hi, please check if "Support client animations and overlay of native elements" option is enabled. This option is very heavy to manage for the Webclients. I'm using the Pixsys srl "TC series" HMI with the code "P3" (so a 4+4 cores CPU) that runs very well also with this option active. The same CPU is mounted also in their WebPanel "WP" series, so you can try one of them if you want.
Last updated: 2024-11-06

Post by ph0010421 on Task time too fast? ^{CODESYS Forge talk (Post)}
Hello I've made an FB which is a TCP server. It uses the excellent CAA NetServices library. If I have the FB in a task <4ms, then the RT crashes immediately at boot up. If the task >=4ms, it starts and runs perfectly. This is even if the block is not doing anything; just instantiated. Am I missing something silly? Why would a low task time cause this? 4ms is perfectly adequate, but I'm just interested why... thanks PH
Last updated: 2024-11-27

Post by paterad on Edge gateway ^{CODESYS Forge talk (Post)}
Hello, I am struggling with Edge gateway to the automation server. It is not possible to establish the link. When I create the Edge in codesys and get it to Automation server, it is red, unable to connect. Scan fails. RPi 4B Runtime 4.13.0.0 Edge gateway 4.13.0.0 Codesys 3.5.2.40 Any idea what to chase? I have been using previous versions of edge gateway. Now I updated all to latest versions, failed. Frustrating.
Last updated: 2024-12-03

Post by amy123 on JSON Utilities ENUM to STRING ^{CODESYS Forge talk (Post)}
Hello, Is it possible to get the string returned from the ENUM JSONType? I read that with regular enumerations you can add '{attribute 'to_string'}' and access it. However, this is from the compiled library, so I can not add that attribute. When I try to use TO_STRING(JSONType) it returns the integer as a string. Ex. jsonType :=TO_STRING(pJSONData^._aJSONData[i].eType); gives '8' instead of NONE Thanks!
Last updated: 2024-12-09

Post by bruno-roth on Read "Homed" status from EtherCAT drive ^{CODESYS Forge talk (Post)}
Hello, the information if your axis is already homed you could only find out direct from your Slave. In DS402 status there is no Bit defined. But some manufacturer of Drives use some optional bits or status. E.g. if you have Schneider Electric LXM32 Servo you will find this information in Bit 15. You have to check the manual of your used Servo-Drive f this information is provided in any object and then read it out with SDO.
Last updated: 2025-01-08

Post by teichhei on The selected container ... does not fit your ticket ^{CODESYS Forge talk (Post)}
Update, installed 3.5.19.70 with the same result. The error message is as useful as a chocolate fire guard. The container SN is in the 130-xxx range which should work. The Version, Chip, Rev number don't mean anything to me. There is no SD Card installed. I've also reinstalled a fresh Wago FW22 image, Deployed PFC200 SL and Edge for Linux, still the same result.
Last updated: 2025-01-09

Post by andrebrandt on BACnet dynamic create bacnet object ^{CODESYS Forge talk (Post)}
Hi. I want to create a FB with bacnet objects. FUNCTION_BLOCK PT1000 VAR_INPUT System: STRING; In: REAL; Name:STRING; END_VAR VAR_OUTPUT Out: REAL; Out_St: Struct_PT1000; END_VAR VAR {attribute 'instance-path'} {attribute 'noinit'} Tag: STRING; Instance:DINT; //AnalogInn : WagoSysBACnet.FbAnalogInput_large(1); This works. Objectname is AnalogInn. identifier is 1 END_VAR I want to name object based on FB PT1000. In FB P1000, I want to write eUnits, Name and so on. How can i do this???
Last updated: 2025-01-15

Post by gatto on Read codesys version in the codesys application ^{CODESYS Forge talk (Post)}
hi, i used another way declaration: pApp : POINTER TO APPLICATION; pAppInfo : POINTER TO APPLICATION_INFO; ProjectName : STRING (24) ; CodesysVersion : STRING (15) ; code: //library : // CmpApp // IoDrvEthernet // // Get Pointer to current application pApp := CmpApp.AppGetCurrent( pResult:= 0 ); // Get Pointer to Application information pAppInfo := CmpApp.AppGetApplicationInfo(pApp:= pApp, pResult:= 0 ); ProjectName := pAppInfo^.pstProjectName^ ; //convert codesys version to string CodesysVersion := IoDrvEthernet.UDINT_TO_IPSTRING ( udiIPAddress := pApp^.udiPSVersion ) ; so i think you need to convert your dwVersion in a UDINT and after convert UDINT_TO_IPSTRING
Last updated: 2025-01-17

Post by nz-dave on FAILURE TO OPEN PROJECT ON ANOTHER COMPUTER ^{CODESYS Forge talk (Post)}
Hi All Not sure what im missing here but i seem to have a lot of issues when i start a project say at home then try to open it at work the next day on another pc, using same version of Codesys. I try the build option when opening the project but still get loads of placeholder,library and some random errors i'm not to sure about. have tied project Archive, which is better, but not perfect. Can someone tell me what im doing wrong!. Cheers
Last updated: 2025-01-20

Post by paulpotat on Can't find the safety manual in the documentation ^{CODESYS Forge talk (Post)}
Hello, I was browsing the "CODESYS Virtual Safe Control for Linux SL" documentation page, and it says the following : For more information about the development of safety-critical applications with CODESYS, see: * Safety Manual H1 – SafetyManual.pdf, which is stored in the directory ../<user>/CODESYS Virtual Safe Control Linux SL/Delivery/Manuals</user> What does this path refers to ? I can't find it in CODESYS installation directories. Best regards
Last updated: 2025-01-23

Post by imdatatas on Remote to PLC device in City-B from City-A ^{CODESYS Forge talk (Post)}
Hello, In an example scenario like below figure, can the developer in City-A connect to the device in City-B remotely using only "Codesys Automation Server" and "Edge Gateway" with the following structure? If no, what should be done with Automation Server for this remote connection requirement? If yes, how should it be configured for this remote connection requirement? Thank you in advance for your answers. Regards, Imdat
Last updated: 2025-02-04

Sort by relevance or date