Post by ricola on Change default node Id name on Raspberry Pi ^{CODESYS Forge talk (Post)}
EDIT : https://forge.codesys.com/forge/talk/Engineering/thread/cb5a492aa0/ hyplcmotion - 2022-12-16 Found out how! Needed to connect to PFC200 via Putty, and open CodesysControl.cfg with “sudo nano /etc/CODESYSControl.cfg”. Then adding following command to the end of file, and use the name you want, save/close CODESYSControl.cfg, and reboot your PLC. [CmpOPCUAProviderIecVarAccess] CustomNodeName= PFC200 Hi! , I'm digging up this issue cause we have still this long name within current versions on CodesysControl. Is it a lock for "demo" licences or can it be changed in some way ? This DeviceSet name is too way long with spaces inside, not easy to handle with string parsing... Cheers !
Last updated: 2024-10-10

Post by davidf on Error trying to activate the demo Git licence ^{CODESYS Forge talk (Post)}
Same error with the other professional demo licences
Last updated: 2024-10-11

Post by eschwellinger on Persistent variables are not read after initialization ^{CODESYS Forge talk (Post)}
no need to activate application composer. It is part of the licensefree part.
Last updated: 2024-10-11

Post by j-page on I have errors while building the project ^{CODESYS Forge talk (Post)}
I updated the Codesys version from “V3.5 SP20” to “V3.5 SP20 Patch1” and that solved the problem.
Last updated: 2024-10-15

Post by eschwellinger on Automation server - trends stop recording - need to manually reconnect ^{CODESYS Forge talk (Post)}
Could you please check which EdgeGateway Version is up and running?
Last updated: 2024-10-23

Post by eschwellinger on Automation server - trends stop recording - need to manually reconnect ^{CODESYS Forge talk (Post)}
Hi Trent, yes should work without, let me check. Regards Edwin
Last updated: 2024-10-23

Post by timvh on Modbus TCP & RTU with Control for Linux SL ^{CODESYS Forge talk (Post)}
RS485 doesn't seem very logical to use in VPLC's in my opinion. I also don't know if this is supported.... But for TCP/IP, I think you still need to configure the Nic settings. See the attached png. In my case enp6s0. When changing this setting, restart the VPLC. What is really nice, is that you don't have to configure the IP address setting in Linux. By setting the Nic to a certain IP address in the CODESYS instance configuration, this is automatically done for you. I only tested this with EtherCAT, but I guess this works the same for Modbus TCP/IP.
Last updated: 2024-10-23

Post by struccc on HTML5 Controls - string(>80) values ^{CODESYS Forge talk (Post)}
Dear all, does anyone have experience with HTML5 controls recently? CODESYS 3.5.20.30 / Visualization 4.6.0.0 I'd like to create a simple lightweight text editor, with proper multiline handling, cut & paste, scrolling, etc. And it seems to work fine, just have problems with strings longer than 80 bytes.... Declaring a variable sText1 : STRING(8000) and referencing it in the HTML5 Controls corresponding value property works perfectly one way: the code receive the data as a string (See log1)... (Note TypeID 1000...) Also sending back the data (seems to work (See log2) except it doesn't change the value of the bound variable. Probably the issue is with using SendSimpleValue method... Naturally, I could do a workaround, but maybe there is a more standard way to implement this... Please let me know if you have any suggestions.
Last updated: 2024-10-23

Post by jeroenaero on CodeSys Raspberry pi I2C driver not found ^{CODESYS Forge talk (Post)}
The voltage what i want to measure is 3.286v. I can check the voltage through terminal, see screenshots.
Last updated: 2024-11-08

Post by ojz0r on Leitungsverzweigung mit einem existierenden Block (z.B. AND-Glied) zu verbinden ^{CODESYS Forge talk (Post)}
What you want is to use the CFC language instead of FB.
Last updated: 2024-11-11

Post by mascara on TouchScreen does not work in Webvisualization. ^{CODESYS Forge talk (Post)}
I found the problem. Need to disable Client Animation Support...
Last updated: 2024-11-11

Post by taqamert on CAN communication settings for USB2CAN-C ^{CODESYS Forge talk (Post)}
Did you solve the problem? I need to help same topic
Last updated: 2024-11-12

Post by garrian on How to write multiple coils (Modbus FC15) ^{CODESYS Forge talk (Post)}
Hi there! I'm testing out modbus TCP/IP for my home brewery, using Wago PFC200 as both slave and master. I'm using Wago library WagoAppPlcModbus. Holding registers, input registers' and discrete inputs works fine, but when trying to write multiple coils, it doesn't work. Any idea what I'm doing wrong here? Attached is a screenshot of my code. I tried both using bit mapping and without. If I change to FC05, and write only 1 coil at the time, it works fine. But I want to write all at the same time.. Any help is very appreciated :)
Last updated: 2024-11-16

Post by ben1 on Access Variable Visu Dialog ^{CODESYS Forge talk (Post)}
Tough to know exactly what you are asking for here. Can you give a more thorough explanation and/or provide snips?
Last updated: 2024-11-17

Post by ben1 on How to write multiple coils (Modbus FC15) ^{CODESYS Forge talk (Post)}
If I am understanding what you are saying, then yes that would be your problem. I would create an array of bools on the client side for the transfer and try that. Or if client can't be changed then use words on server and unpack. But I am not sure if you or I are mis interpreting but it sounds a bit jumbled. I don't know what you have control of, but, if you are turning on BITS in the server, you should write to BITS in the client with a Function 15. If you are writing to WORDS in the server, you should write to WORDS in the client with a Function 16.
Last updated: 2024-11-17

Post by simone on Collapse all ^{CODESYS Forge talk (Post)}
Hi, I'm wondering if it exist a button or a keyboard shortcut (much much better) for "collapse all" the open folder on a codesys project. It would really be nice to have. Also: Are there some options or configuration for set a default zoom for the different editor (or even one global), for example I would like to have 100% on ST, LD editor and have 80% on Visualization Editor; and also have a button to set all the zooms to default, now it seems that every file mantain the one previously set. I'm working with the 3.5.20.10 right now Thanks!
Last updated: 2024-11-21

Post by struccc on library ModbusTCP Slave 4.1.0.0 - function block ModbusServer ^{CODESYS Forge talk (Post)}
:) Yeah... Definitely not a "boring" platform, they are nice to give us work for the upcoming years... :)
Last updated: 2024-12-02

Post by paterad on Edge gateway ^{CODESYS Forge talk (Post)}
Alright, yesterday I uprgraded runtime and edge both to version 4.14.0.0 and everything works again. David
Last updated: 2024-12-05

Post by akfarslan on The application does not exist on "device" ^{CODESYS Forge talk (Post)}
Dear All, I am using CODESYS 3.5.19 SP4 with a PLC device. When I try to download my program to the device, I get the error: "The application 'Application' does not exist on the device". Additionally, after restarting the device, the program does not run automatically. When I connect to the device using WinSCP, I can see that the application.app file is uploaded to the root directory, but the device does not automatically start the application. I tried using the Create Boot Application option, but it does not resolve the issue. Is there another configuration step I am missing? How can I fix this problem? Thank you, Best regards,
Last updated: 2024-12-17

Post by necatibilgin on Run Bootproject with Linux Command ^{CODESYS Forge talk (Post)}
Is there any way to run Application.app with a specific Linux command?
Last updated: 2024-12-17

Post by ton on Project loses 'Download time' information ^{CODESYS Forge talk (Post)}
Hi, This is with Combivis Studio. I thought you need a license from KEB to create a boot project.
Last updated: 2024-12-20

Post by eschwellinger on Runtime Problem connecting to Keyence IV-500MA Camera ^{CODESYS Forge talk (Post)}
which plc in which version do you use?
Last updated: 2024-12-27

Sort by relevance or date