Post by eschwellinger on RaspberryPi 5 gateway problem ^{CODESYS Forge talk (Post)}
Do you use the same type Raspberry PI64 SL in the device tree? Which version of the Pi package / Runtime do you use? 4.16.0.0?
Last updated: 2025-06-12

Post by timothyzalusky on Missing Device Descriptions in Repository ^{CODESYS Forge talk (Post)}
For reference this is fixed by installing the new codesys install with a separate repository folder. Completely resolved. If anyone else sees this. I would like to know why the persistent devices repository folder does not properly retain between installs though.
Last updated: 2025-06-12

Post by timothyzalusky on Missing Device Descriptions in Repository ^{CODESYS Forge talk (Post)}
For reference this is fixed by installing the new codesys install with a separate repository folder. Completely resolved. If anyone else sees this. I would like to know why the persistent devices repository folder does not properly retain between installs though.
Last updated: 2025-06-12

Post by timothyzalusky on Missing Device Descriptions in Repository ^{CODESYS Forge talk (Post)}
For reference this is fixed by installing the new codesys install with a separate repository folder. Completely resolved. If anyone else sees this. I would like to know why the persistent devices repository folder does not properly retain between installs though.
Last updated: 2025-06-12

Post by tk096 on How to get the motor scaling value from code ^{CODESYS Forge talk (Post)}
Hi, unfortunately, in Softmotion you have only access to the combined fraction - the scaling factor from user units to motor increments. It can be accessed using MC_ReadParameter with parameter number 1054. increments = user_unit_position * fScaleFactor
Last updated: 2025-06-13

Post by tk096 on SMC_ReadNCFile2 is always busy ^{CODESYS Forge talk (Post)}
Hi, do you process the sentences subsequently? If not, the function block fills the sentences (queue) and waits for the sentences to be processed, so that new sentences can be read and filled to the queue.
Last updated: 2025-06-17

Post by milan-svarny on Redundancy problem - primary PLC suddenly goes to simulation state ^{CODESYS Forge talk (Post)}
Hi Ivanmaltar, please , did you solve the problem? i have the same case. Second PLC is going suddenly to Sim. state Thank you
Last updated: 2025-06-18

Post by taoufikaoun on Profinet Simulator ^{CODESYS Forge talk (Post)}
Hello, I am new to codesys i want to create 100% simulator profinet network only with virtual ethernet adapter it is possible. I want to use Codesys build in controller and device io for profinet. Thanks.
Last updated: 2025-06-20

Post by taoufikaoun on Profinet Simulator ^{CODESYS Forge talk (Post)}
Hello, I am new to codesys i want to create 100% simulator profinet network only with virtual ethernet adapter it is possible. I want to use Codesys build in controller and device io for profinet. Thanks.
Last updated: 2025-06-20

Post by nxbp on Cam Editor And Cam Problem ^{CODESYS Forge talk (Post)}
I Created cam with 361 cam points ( 0,1,2.....360 ). The values in the Cam_A array do not match the Cam points entered in the Cam editor.
Last updated: 2025-06-22

Post by programmer on 3.5 P20 hangs - no response ^{CODESYS Forge talk (Post)}
Hi, Is there a solution found for the problem described in first post? Any version above Codesys 3.5 P19 hangs during start up. It makes no difference whether I simply start Codesys or open a project directly. I'm using Windows 10 Home edition. Thanks!
Last updated: 2025-06-23

Post by eschwellinger on How to download dependencies packages for CODESYS Control for Raspberry Pi SL ? ^{CODESYS Forge talk (Post)}
with latest version? 4.16.0.0? Use the CODESYS Installer to download all required packages if you need an offline installation
Last updated: 2025-06-24

Post by jeindhoven on Deploying to raspberry pi 5 hangs ^{CODESYS Forge talk (Post)}
Yes, the putty connection from within the virtual windows 10 worked. No, the codesys runtime deploy from within the virtual windows 10 did not.
Last updated: 2025-06-25

Post by rckalex on Adjusting Ethernet Settings from Visualization ^{CODESYS Forge talk (Post)}
Could someone please share reference documentation for interacting with a device's IP settings from a visualization/webvisu? Is what is outlined here still valid? https://forge.codesys.com/forge/talk/Engineering/thread/ad11c199a2/
Last updated: 2025-06-26

Post by tk096 on Cam Editor And Cam Problem ^{CODESYS Forge talk (Post)}
Hi, in the XYVA compile format the editor is adding an additional point if the derivatives are jumping at this point. However, this should not change the path?
Last updated: 2025-06-30

Post by nielscho on Saving "Input/output names" in a DCF file ^{CODESYS Forge talk (Post)}
Hello i have the same question but for Codesys 3.5. alternativley, could somebody name a Programm to create a DCF file out of an EDS? best regards
Last updated: 2025-07-02

Post by matto99 on Raspberry Pi 5 ^{CODESYS Forge talk (Post)}
is there any plans to include the Rapsberry pi5 IOs ? At this time we still have the folowing restriction "CODESYS Control for Raspberry Pi SL unterstützt keine GPIOs auf dem Raspberry Pi 5"
Last updated: 2025-07-03

Post by gabriela-g on Compiler errors not visible ^{CODESYS Forge talk (Post)}
Hi, I have the same situation and I tried the advice from here, but didn't worked:my error messages are still not sowing up in the Messages window. Do you have any idea why?
Last updated: 2025-07-03

Post by mickael on stepper motor + Raspberry pi 5 + Codesys ^{CODESYS Forge talk (Post)}
Hello, I can't figure out how to configure the DIR and STEP pins of the GPIO for an SM_Drive_RaspiStepper_Pulsdir axis. Can you send me a scan? Also, does the MC_POWER status always remain False? Thanks.
Last updated: 2025-07-06

Post by canplum on StartTargetvisu failed with result: 12 ^{CODESYS Forge talk (Post)}
Does anybody know what this error means? StartTargetvisu failed with result: 12 My codesyscontrol is crashing always after 25 hours. I can't see why. The trace of too many files opened I already followed but couldn't find any error in my program. Cheers, CanBohr
Last updated: 2025-07-07

Post by mickael on Motor stepper raspberry pi 5 Codesys ^{CODESYS Forge talk (Post)}
Hello, I can't figure out how to configure the DIR and STEP pins of the GPIO for an SM_Drive_RaspiStepper_Pulsdir axis. Can you send me a scan? Also, does the MC_POWER status always remain False? Thanks.
Last updated: 2025-07-06

Post by eschwellinger on Codesys Control Win 64 3.5.21.0 KNX unaufgelöste Referenzen ^{CODESYS Forge talk (Post)}
Welche version genau verwendest du? Das Verzeichnis des Configfiles hat sich ja zu 3.5.20.10 verschoben..durch nen Security Bugfix. Schau dir das Log beim starten an, da müsstest du sehen ob die KNX Komponente geladen wird.
Last updated: 2025-07-07

Post by blitz on SMC_CNC_INTERNAL_ERROR - SMC_ReadNCFromStream ^{CODESYS Forge talk (Post)}
Hi. Has anyone managed to implement the MDI (Manual Data Input) functionality in CODESYS CNC? I'm using SMC_StringStream2 and SMC_ReadNCFromStream, but I'm getting the error: SMC_CNC_INTERNAL_ERROR. I'd really appreciate any suggestions beyond what's already available online.
Last updated: 2025-07-09

Post by ben1 on Login to Visu optional ^{CODESYS Forge talk (Post)}
It sounds like you are trying to use the device user management, but you can use the visu user management found in the Visu Manager for this.
Last updated: 2025-07-10

Post by fkoenig on Codesys Control Win 64 3.5.21.0 KNX unaufgelöste Referenzen ^{CODESYS Forge talk (Post)}
Auf dem PC der Soft-SPS läuft CODESYS Control Win 64 3.5.21.0. Als Programmierumgebung auf meinem Laptop habe ich die Version CODESYS 3.5.21.10. Wo befindet sich jetzt das Verzeichnis des Configfiles?
Last updated: 2025-07-10

Sort by relevance or date