Post by jeroenaero on CodeSys Raspberry pi I2C driver not found ^{CODESYS Forge talk (Post)}
i created a new project and did what you said, but still the same problem unfortunately. The ADS1115 is constantly changing from running to not running.
Last updated: 2024-11-08

Post by timvh on Leitungsverzweigung mit einem existierenden Block (z.B. AND-Glied) zu verbinden ^{CODESYS Forge talk (Post)}
A branch is a branch (doesn't grow back to the tree). But what you are trying to do is use several XORs. See attachement.
Last updated: 2024-11-09

Post by jeroenaero on CodeSys Raspberry pi I2C driver not found ^{CODESYS Forge talk (Post)}
We use a Compute module 4 it's 64bit based, so i cannot change it to sl.what are the possibilities to get the i2c working?
Last updated: 2024-11-09

Compiling Errors with Ethernet/IP Scanner ^{CODESYS Forge talk (Thread)}
Compiling Errors with Ethernet/IP Scanner
Last updated: 2024-11-09

Post by andrax on CodeSys Raspberry pi I2C driver not found ^{CODESYS Forge talk (Post)}
I took a look at your project. First of all, a Raspbery Pi4 is installed. You must use the GPIOs_A_B(GPIOs B+/Pi2). The error ULINT can't be set to IDINT.... with your project as well. If I change your project to ‘CODESYS_Control_for_Raspberry_Pi_SL’ the error is gone.
Last updated: 2024-11-09

Post by timvh on File access operation denied ^{CODESYS Forge talk (Post)}
Go in Windows to this location. Right click on this file and go to properties. Is it in Read-only state? Then CODESYS cannot open in Write mode.
Last updated: 2024-11-09

Post by jeroenaero on CodeSys Raspberry pi I2C driver not found ^{CODESYS Forge talk (Post)}
I included a project archive in the attachments
Last updated: 2024-11-09

Post by andrax on CodeSys Raspberry pi I2C driver not found ^{CODESYS Forge talk (Post)}
Sorry, wrong expression. You have a 64bit system, so do I. You can also use the 64bit runtime, but most bib and commands are 32bit and are not properly supported. I had read somewhere that there are problems with I2C. That's why I recommend switching to PI_SL and using the correct gpio.
Last updated: 2024-11-09

Post by marekxc on Compiling Errors with Ethernet/IP Scanner ^{CODESYS Forge talk (Post)}
Update the Device: Right-click on the device icon in the project tree. Select the “Update Device” option. Recompile the Project: After updating the device, recompile the project from scratch to ensure that all changes are included. Check Task Settings: Go to the “Tasks” tab in the project. Check the priority settings for the tasks to ensure they are configured correctly.
Last updated: 2024-11-09

Post by andrax on CodeSys Raspberry pi I2C driver not found ^{CODESYS Forge talk (Post)}
This is the operating system and has nothing to do with the runtime. Unless you use 64bit commands. You can see for yourself that you have errors with 64bit compilers
Last updated: 2024-11-09

Post by tyronnosaurus on SysLibMem.lib Where To Download? ^{CODESYS Forge talk (Post)}
It should come by default on a normal install of Codesys 2.3, but it's a bit hidden: Like for any other library, go to Resources > library Manager > Right click on list of libraries > Additional library. On the browser that opens, instead of looking in the default folder, use the dropdown menu at the bottom to change the folder (SysLibMem should be on the 3rd folder).
Last updated: 2024-11-11

Post by ellocco on Leitungsverzweigung mit einem existierenden Block (z.B. AND-Glied) zu verbinden ^{CODESYS Forge talk (Post)}
Thanks for your response and your idea. To sum up, you also have no idea how to connect two existing blocks. Meanwhile I worked with "PLCnext engineer" and the result is:
Last updated: 2024-11-11

SysLibMem.lib Where To Download? ^{CODESYS Forge talk (Thread)}
SysLibMem.lib Where To Download?
Last updated: 2024-11-11

Post by mae-rex on Anzeige von gelatchten Werten im Alarmmanager in anderen Zahlenformat ^{CODESYS Forge talk (Post)}
Hallo, ich möchte den Alarmmanager verwenden und dabei einen generischen Fehlereintrag für meine Subkomponenten haben. Diese haben im allgemeinen einen Fehlercode, der hexadezimal dokumentiert ist und somit für den Anwender auch in der Form am sinnvollsten ist. Daher meine Frage: Gibt es eine Möglichkeit den Fehlertext in der Alarmkonfiguration wie folgt (in der Funktionalität) anzupassen: "Komponentenfehler hex(<latch1>)" oder wie auch immer.</latch1> Grüße
Last updated: 2024-11-11

Post by gatto on Undertanding Application Based Licenses ^{CODESYS Forge talk (Post)}
Hi, i think you are right. Did you press the key shopping cart? Codesys tells you the license. What I don't appreciate is that i need an additional license for communication. The system reports opc ua but this cheats you. This is communication that also concerns the tag symbols that codesys eth v3 exchanges with an operator panel. Attached is a screenshot of my case where you can see that communication opc ua is cheating you. 512 tags included in the program license are few. So, I had to buy 2 licenses. one for the program and one for communication. I don't like this policy.
Last updated: 2024-11-11

Post by bertcom on Converting each character to a string into ASCII ^{CODESYS Forge talk (Post)}
@TimvH, Thank you, i think this way i can seperate the complete string to characters. Next part of the topic is converting the characters to an ASCII code. Is there an standerd function in Codesys for this? I alredy searched a few hours for it on the internet. no succes.
Last updated: 2024-11-11

Undertanding Application Based Licenses ^{CODESYS Forge talk (Thread)}
Undertanding Application Based Licenses
Last updated: 2024-11-11

Post by ph0010421 on Converting each character to a string into ASCII ^{CODESYS Forge talk (Post)}
So the printer wants an ASCII conversion of the hex equivalent of ASCII characters?? They don't make it easy for us
Last updated: 2024-11-11

Post by ojz0r on Leitungsverzweigung mit einem existierenden Block (z.B. AND-Glied) zu verbinden ^{CODESYS Forge talk (Post)}
What you want is to use the CFC language instead of FB.
Last updated: 2024-11-11

Post by imdatatas on MC_CamIn did not work properly with SMC_FreeEncoder on SoftMotion 4.17.0.0 ^{CODESYS Forge talk (Post)}
Hello, I am facing a problem with the new Softmotion 4.17.0.0 version. Has anyone encountered a similar problem, what is the solution? I would be happy if you could share it. Problem description: -- "SMC_FreeEncoder" encoder axis is the master, -- The motor of the servo driver on the EtherCAT bus is the slave axis. -- When the MC_CamIn block executed, the InSync output is activated. However, although the master encoder axis position value changes, there is no movement in the slave servo axis! Test steps: 1-) EtherCAT servo axis installed, configured and motion test was performed with MC_Jog. No problem. 2-) Softmotion general axis pool > SMC_FreeEncoder was added and pulse amount configuration was performed. No problem. 3-) Incremental encoder actual count value was transferred to the "SMC_FreeEncoder.diEncoderPosition" variable as DINT under the ethercat task in every cycle and the encoder axis position value was observed. No problem. 4-) A simple CAM table with a 1:1 ratio was created under the project tree. (For example: Simply, when the encoder rotates 1 turn, the motor will rotate 1 turn.) 5-) The SMC_FreeEncoder axis enabled with MC_Power and brought to the StandStill state. 6-) The MC_CamTableSelect block was run with default input values ​​(all absolute) and only the Cam table name was specified. The Done output was seen successfully. No problem. 7-) The MC_CamIn block was activated with default input values ​​(absolute) and only the master encoder axis name, slave servo axis name, CamTableID input pins was specified and then "Execute" input set to TRUE. 8-) The InSync output information of the MC_CamIn block observed as TRUE. However, although the encoder axis value changed, the position value of the slave axis did not change at all, it did not move. It always remained at 0.0mm. 9-) When I repeated the same steps above, only changing the master axis to SM_Drive_Virtual instead of FreeEncoder and gave movement to the virtual axis, this time the slave axis moved successfully. However, when the same steps and operations are performed with the same IDE just downgrade SoftMotion version from 4.17.0.0 to 4.10.0.0, everything works normally and without problems as expected in MC_CamIn block with FreeEncoder master. (By the way, The used IDE version is Codesys V3.5 SP20patch3.) Best Regards Imdat
Last updated: 2024-11-11

Anzeige von gelatchten Werten im Alarmmanager in anderen Zahlenformat ^{CODESYS Forge talk (Thread)}
Anzeige von gelatchten Werten im Alarmmanager in anderen Zahlenformat
Last updated: 2024-11-11

Converting each character to a string into ASCII ^{CODESYS Forge talk (Thread)}
Converting each character to a string into ASCII
Last updated: 2024-11-11

Post by timvh on Converting each character to a string into ASCII ^{CODESYS Forge talk (Post)}
A standard string is actually a list of bytes that represent the ASCII code for each character. The following part of code will give you the ASCII code of one of the characters in the string: byChar := sInput[i];
Last updated: 2024-11-11

Post by jeroenaero on CodeSys Raspberry pi I2C driver not found ^{CODESYS Forge talk (Post)}
I succeed to change the device to PI_SL but still the same problem of the I2C device switching between running and not running. the only difference with your project is that yo use I2C_master device version 4.7.0 and i 4.7.13, for GPIO i also use the 4.7.13 version and you the 4.7.0. Can you send me the older version of the Raspberry PI pheripals library, because i cannot choose lower version then 4.7.10 for the GPIO and I2C_master device
Last updated: 2024-11-11

Leitungsverzweigung mit einem existierenden Block (z.B. AND-Glied) zu verbinden ^{CODESYS Forge talk (Thread)}
Leitungsverzweigung mit einem existierenden Block (z.B. AND-Glied) zu verbinden
Last updated: 2024-11-11

Sort by relevance or date