Post by z870623 on About CPU Loading ^{CODESYS Forge talk (Post)}
I am running a runtime environment on an ARM A35 dual-core processor (1.5GHz) and have encountered some issues. The CPU load (both CPU0 and CPU1) occasionally spikes above 50% before returning to normal, and this happens around 2-3 times per minute. At the same time, I’ve noticed that the Max Cycle Time in the Codesys monitoring screen shows much worse performance compared to the A53 (1.2GHz), with nearly double the cycle time. The optimizations I have made so far are as follows: Set the CPU to performance mode. Isolated CPUs: CPU0 is dedicated to running Linux services and the runtime itself, while CPU1 runs the EtherCAT task and the MainTask. Despite CPU1 only running these two tasks, the utilization still increases above 50%, which I find unreasonable. Additionally, I performed tests using cyclictest both without and with the runtime running. The performance is shown in the following image: From the results, I believe the CPU performance should be fine, but I am unsure why the monitoring results are not as expected. The testing outcomes should ideally be as close as possible to the cyclictest results. Does anyone have related solutions to this issue?
Last updated: 2024-10-14

Post by paulpotat on Can't open license manager with raspberry CM4 ^{CODESYS Forge talk (Post)}
Do someone have any information on this topic ? We tried several different CM4 boards without success, and we cannot install the licenses we bought anymore... Isn't CodeSys supposed to support CM4 Raspberry pi ?
Last updated: 2024-10-15

Post by paulpotat on Can't open license manager with raspberry CM4 ^{CODESYS Forge talk (Post)}
Update : The solution I mentionned in a previous post does not always work. Some Raspberry Pi CM4 still won't create the license container. I will open a support ticket.
Last updated: 2024-10-18

Post by winki on Modbus TCP & RTU with Control for Linux SL ^{CODESYS Forge talk (Post)}
I do not have error anymore using nic with eth0 value. But my network it still 172.17.0.3 like the first picture.
Last updated: 2024-10-23

Post by navan on File access operation denied ^{CODESYS Forge talk (Post)}
Codesys V3.5.20.10 having issue open windows folder. Willing to know the [Sysfile] location in windows for V3.5.20.10 (32 bit) installation. kindly hep on this.
Last updated: 2024-11-05

Post by andrax on CodeSys Raspberry pi I2C driver not found ^{CODESYS Forge talk (Post)}
take a look here. there is a working driver in the collection https://forge.codesys.com/forge/talk/Deutsch/thread/87bfe42cbb/?limit=25#514f
Last updated: 2024-11-07

Post by andrax on CodeSys Raspberry pi I2C driver not found ^{CODESYS Forge talk (Post)}
Note: if you do not get any values. Check the correct wiring again. The board seems to be running and you have no error.
Last updated: 2024-11-07

Post by jeroenaero on CodeSys Raspberry pi I2C driver not found ^{CODESYS Forge talk (Post)}
I tested your project but with same results i am still not seeing analog values. I also included the library list, the mainprogram.
Last updated: 2024-11-08

Post by jeroenaero on CodeSys Raspberry pi I2C driver not found ^{CODESYS Forge talk (Post)}
i created a new project and did what you said, but still the same problem unfortunately. The ADS1115 is constantly changing from running to not running.
Last updated: 2024-11-08

Post by jeroenaero on CodeSys Raspberry pi I2C driver not found ^{CODESYS Forge talk (Post)}
i created a new project and did what you said, but still the same problem unfortunately. The ADS1115 is constantly changing from running to not running.
Last updated: 2024-11-08

Post by jeroenaero on CodeSys Raspberry pi I2C driver not found ^{CODESYS Forge talk (Post)}
i created a new project and did what you said, but still the same problem unfortunately. The ADS1115 is constantly changing from running to not running.
Last updated: 2024-11-08

Post by jeroenaero on CodeSys Raspberry pi I2C driver not found ^{CODESYS Forge talk (Post)}
i created a new project and did what you said, but still the same problem unfortunately. The ADS1115 is constantly changing from running to not running.
Last updated: 2024-11-08

Post by jeroenaero on CodeSys Raspberry pi I2C driver not found ^{CODESYS Forge talk (Post)}
i created a new project and did what you said, but still the same problem unfortunately. The ADS1115 is constantly changing from running to not running.
Last updated: 2024-11-08

Post by jeroenaero on CodeSys Raspberry pi I2C driver not found ^{CODESYS Forge talk (Post)}
i created a new project and did what you said, but still the same problem unfortunately. The ADS1115 is constantly changing from running to not running.
Last updated: 2024-11-08

Post by jeroenaero on CodeSys Raspberry pi I2C driver not found ^{CODESYS Forge talk (Post)}
i created a new project and did what you said, but still the same problem unfortunately. The ADS1115 is constantly changing from running to not running.
Last updated: 2024-11-08

Post by jeroenaero on CodeSys Raspberry pi I2C driver not found ^{CODESYS Forge talk (Post)}
We use a Compute module 4 it's 64bit based, so i cannot change it to sl.what are the possibilities to get the i2c working?
Last updated: 2024-11-09

Post by timvh on File access operation denied ^{CODESYS Forge talk (Post)}
Go in Windows to this location. Right click on this file and go to properties. Is it in Read-only state? Then CODESYS cannot open in Write mode.
Last updated: 2024-11-09

Post by jeroenaero on CodeSys Raspberry pi I2C driver not found ^{CODESYS Forge talk (Post)}
I also installed your codesys version with the codesys for raspberry pi package version 4.7.0. but with no succes, only the TCA multiplexer has a constant green turning circle, the ADS1115 still changing from running to not running.
Last updated: 2024-11-11

Post by kumareasu on Windows on ARM / Microsoft Surface ^{CODESYS Forge talk (Post)}
I too need this information. Is it possible to install CoDeSys runtime and convert a ARM system installed Windows IoT as OS and convert as PLC?
Last updated: 2024-11-16

Post by yannickasselin on ControlWin 3.5.20.30 Issues ^{CODESYS Forge talk (Post)}
Hello, I tried installing ControlWin 3.5.20.40 and still have the same issue. I tried on 2 different PCs running Win10 Enterprise 2016 LTSB So I then installed the Gateway from 3.5.20.20 and it works. Is there an issue using ControlWin 3.5.20.40 with Gateway from 3.5.20.20? Thank you
Last updated: 2024-11-25

Post by totorovic on Project loses 'Download time' information ^{CODESYS Forge talk (Post)}
I'm still having issue with this. I have the same code between my IDE and the runtime but I cannot connect because there is no download time indicated on the IDE side. Please Codesys how to solve this ?
Last updated: 2024-12-03

Post by andrax on Need help to get RS-485 signal in Cosesys . ^{CODESYS Forge talk (Post)}
You need an SPI driver for the board. If there is nothing on the net, you will have to write one yourself
Last updated: 2024-12-03

Post by eschwellinger on Not Possible to connect using control SL ^{CODESYS Forge talk (Post)}
should work, could you please check on the target: top if the the gateway is running -> you should see codesysedge.bin and cat /var/opt/codesysedge/codesysedge.log
Last updated: 2025-01-07

Post by yannickasselin on The selected container ... does not fit your ticket ^{CODESYS Forge talk (Post)}
Not sure this will help you but I had the same issue and was able to activate the license on a Windows PC using the Web Depot in a web browser. https://content.helpme-codesys.com/en/CODESYS%20Development%20System/_cds_installing_license.html
Last updated: 2025-01-08

Post by winki on Not Possible to connect using control SL ^{CODESYS Forge talk (Post)}
Thx for your help, I just Uninstall and install again codesys. I did it as admnistrator and now it is working... I did not change anything into the target configuration. Only my codesys on my computer. Loic,
Last updated: 2025-01-10

Sort by relevance or date