Post by koehler on Codesys 3.5.12 Module not Found ^{CODESYS Forge talk (Post)}
Hi there, I am getting troubles with a project. In the Hardware configuration I got some Lenze drives 9400. One of them got as status " Module not Found". Connection are good. ID Node of the Canopen network is also good. I don't find any reason for this status, nor any options to check.
Last updated: 2024-04-17

Post by aniket-b on Configure encapsulation Layer while using Ethetnet/ip product ^{CODESYS Forge talk (Post)}
I found this issue raised multiple times but I do not find a solution for this. I am getting Configure encapsulation Layer on EIP product while using with CODESYS V3.5 SP22. This product works well with Rockwell, Omron, Mithshibishi PLCs. The same device, same eds file, same EIP configuration does not work with CODESYS. Can someone please guide me here?
Last updated: 2026-07-30

Post by alimans on OPC-UA Server, Symbol Set: Raise an error: Object reference not set to an instance of an object. ^{CODESYS Forge talk (Post)}
Hi everyone, I just created a very simple library without any code and, added it to my very simple project. after adding this library, I get an error when I try to open "Symbol Set" in "OPC UA Server" in "Communication Manager". Here is the code of my POU in the library: FUNCTION_BLOCK POU VAR eCommand : (CMD_NONE:=0, CMD_RESET:=-1) INT := CMD_NONE; END_VAR Attached is the error that I get. I also noticed that by removing the enumeration variable above (eCommand), I can open the "Symbol Set" again. Anybody has any idea why this error is raised and how could I use enumeration variables without error in "OPC UA Symbol Set"?
Last updated: 2024-08-08

Post by simond on OpcUa_StatusCode Control ^{CODESYS Forge talk (Post)}
The OpcUa_StatusCode enum exists in CmpOPCUAStack Interfaces — how do I bind one to a published symbol so clients see the StatusCode change?
Last updated: 2026-05-06

Post by george32 on TCP Server ^{CODESYS Forge talk (Post)}
Dear people, I would like to create a TCP server in my PLC program. The TCP server needs to communicate with an external device. I have been searching the internet and found that the libraries Syssocket or CAA NetBaseSrv are two possible solutions to create a TCP server. From what I have read, CAA NetBaseSrv is more user-friendly to implement than the Syssocket variant. However, I am still struggling to actually implement this library. Foremost is my little knowledge about creating a TCP server and how to read/understand each function block, especially the outputs of some blocks and the types, e.g. server has an output CAA.Handle, but I cannot find the explanation of CAA.Handle. I tried to find a good document that can help me understand how to implement a TCP server, but I could not find it. Thank you in advance, George
Last updated: 2025-02-20

Post by timvh on EXCEPTION [watchdog] how to find position cause ^{CODESYS Forge talk (Post)}
Monitor what your current cycle time is (in the Task Configuration when you are online). If this is sometimes close to 200ms, then change your code (e.g. limit the loops, or prevent copying a lot of data between objects). Or just set the Watchdog time (or sensitivity) higher if you don't care that it sometimes takes longer than 200ms. If you want to find out which objects in your application consume the most time, then buy a PDE (Professional Developer Edition) license. With this you get a license for the Profiler. This can help you a lot to find the root cause, because it will create a nice overview of all objects, their calls and the time (percentage) it takes to execute it.
Last updated: 2026-02-09

Find Function: Object reference not set to an instance of an object. ^{CODESYS Forge talk (Thread)}
Find Function: Object reference not set to an instance of an object.
Last updated: 2023-10-30

Is there a way to compare 2 projects & find changes ? ^{CODESYS Forge talk (Thread)}
Is there a way to compare 2 projects & find changes ?
Last updated: 2012-06-11

Test Table - Scan testee does not find enum input or output ^{CODESYS Forge talk (Thread)}
Test Table - Scan testee does not find enum input or output
Last updated: 2022-11-17

How do you find the PID of the process using http://127.0.0. ^{CODESYS Forge talk (Thread)}
How do you find the PID of the process using http://127.0.0.
Last updated: 2008-10-31

Scan network does not find industrial PC running the CODESYS Control for Linux runtime ^{CODESYS Forge talk (Thread)}
Scan network does not find industrial PC running the CODESYS Control for Linux runtime
Last updated: 2022-01-07

Find out on which WebVisu page a text ID from the global text list is linked. ^{CODESYS Forge talk (Thread)}
Find out on which WebVisu page a text ID from the global text list is linked.
Last updated: 2023-05-30

How to find out if a device has been scanned for ^{CODESYS Forge talk (Thread)}
How to find out if a device has been scanned for
Last updated: 2016-05-18

Could not save the project: Could not find part of the path ^{CODESYS Forge talk (Thread)}
Could not save the project: Could not find part of the path
Last updated: 2026-06-10

Post by transmin01 on EtherCat Master cannot open network adaptor on Win10x64 target ^{CODESYS Forge talk (Post)}
Thanks @eschwellinger installed WinPcap. Regards Trevor
Last updated: 2023-09-14

Post by clarenced on Multiple applications on one device sharing variables. ^{CODESYS Forge talk (Post)}
I am looking for an example of how to run 2 applications on 1 device that would have global variables shared between the two apps. In this case what I am trying to do is to have the main program logic run as one application and then have the visualization run as a second application. I find this https://us.store.codesys.com/media/n98_media_assets/files/000013-F/0/Multiple%20Applications_en.pdf, that talks about exactly what I want to do, but I can't find the download. The main reason I want to do this is for download speed. Right now it takes at least a minute to download our application to the PLC. A simple program downloads to the PLC in a very short time, but add visualization and the download time gets much longer. If I could download the program separately from the visualization I think that a simple program change would take very little time to download. I have tried create a GVL in the POUs view. This partly works in that both applications can see the GVL, but they each create their own instance of it and the variables are not shared between the two apps. There are ideas of using OPCUA but this raises problems with licensing and having to move any variable that needs to be shared into the Symbol Configuration. This adds a lot of management to keep this up to date. Any ideas would be appreciated thanks.
Last updated: 2025-02-20

Post by mondinmr on First IO address of a CAADiagDeviceDefault. ^{CODESYS Forge talk (Post)}
I have a device CAADiagDeviceDefault: IoConfig_Globals.Axis_A In our library, we perform introspection of the Etc_SlaveDiag. In that case, we have connectors, and by searching for them by address, I can find them in the IO mapping using the offset and size provided by EtherCAT. However, a Lenze i700 drive, instead of placing the IO mapping in the Etc_SlaveDiag device, places it in a sub-device CAADiagDeviceDefault. So, when I perform introspection, I cannot find the IO correspondences. Yet, in the CAADiagDeviceDefault, I do not find the connectors and cannot do the matching. Is there a way with a pointer or reference to a CAADiagDeviceDefault to obtain the address of the first input and the address of the first output? This is because we have our own motion library with many EtherCAT devices that automatically configure the mappings, but I can't manage to do so with the Lenze i700.
Last updated: 2024-08-22

Post by alex-at-xana on EThercat Dynamic configuration ^{CODESYS Forge talk (Post)}
Hi Everyone, For a fast monitoring system I am using Ethercat oversampling and timestamping inputs. As the customers has a lot of different configurations out in the field, we went for a dynamic Ethercat configuration. Already got the whole detection chain working but now I am stuck since two days in debugging the configuration. Here are my quesitons: I extended the dynamic config example for the EL3632 16#0E303052: //EL3632 pSlave^.SetDCSettings(TRUE,TRUE,80,80,TRUE,4000,0,0); pSlave^.AddSyncManager(16#1000,128,16#26,TRUE,3); pSlave^.AddSyncManager(16#1080,128,16#22,TRUE,2); pSlave^.AddSyncManager(16#1100,0,16#4,TRUE,1); pSlave^.AddSyncManager(16#1110,214,16#20,TRUE,0); pSlave^.AddFMMU(0,214,0,7,16#1110,0,1,1); pSlave^.AddFMMU(0,1,0,0,16#80D,0,1,1); xKnown := TRUE; This leads to a PLL Error for these devices. I double and triple checked the configuraton, but cannot find the issue. There seems to be one difference: the config dialog creates a startup parameter: 16#10F3:16#05, Name: Command_0, Value:0. Bitlen: 16, Stop on fault: false, jumpt at fault: false: next line: 0 a) I do not find information on how to set this in my code. Can you help me there? b) Without trying to set the value, I get a PLL error for these devices in the master log. Is the config wrong? c) Do I need to set the Master to Autoconfigure or Manual? I used autoconfigure for my tests. The stack creates input data addresses for the slaves input data range (pSlaves[i].InputData) which are different from those created when I use the Engineering tools dialogs to configure Ethercat. Specifically, the addresses seem to be aligned at 16 byte boundaries when they are created using the engineering tool, but may appear at uneven addresses when I use the script in dynamic config. I did not try to access ULINT at uneven addresses yet, but I am suspecting this may be a problem. Do I need to manually align the addresses ? Any help is appreciated...
Last updated: 2024-09-10

Post by bjarne-pagaard on Unable to add alarm configuration object to project ^{CODESYS Forge talk (Post)}
I believe it should be available. It may be the case, that your device does not support the alarm configuration. Some smaller PLCs sometimes do not support it. You can try changing to a different device, like a Codesys Control Win, in your project, and see if then allows you to add the alarm configuration.
Last updated: 2024-09-27

Post by tk096 on SoftMotion SML ^{CODESYS Forge talk (Post)}
Hi, can you post a screenshot of your drive configuration?
Last updated: 2024-07-08

Post by alex-at-xana on EThercat Dynamic configuration ^{CODESYS Forge talk (Post)}
Could anyone support me here?
Last updated: 2024-09-18

Post by installwhat on Unable to select VisuDialogs.Numpad in Open Dialog input configuration ^{CODESYS Forge talk (Post)}
data type?
Last updated: 2025-07-16

Post by pernockham on PHOENIX CONTACT Axioline PLCnext project in CodeSys SodftPLC ^{CODESYS Forge talk (Post)}
Pretty much my configuration, see attached.
Last updated: 2025-09-09

Why do I get C0434: Function block AbstractFunctionBlock is ABSTRACT and cannot be instantiated for a Reference? ^{CODESYS Forge talk (Thread)}
Why do I get C0434: Function block AbstractFunctionBlock is ABSTRACT and cannot be instantiated for a Reference?
Last updated: 2022-08-14

[Error when Install Codesys for Beaglebone black ver4.0.0] cannot access '/sys/bus/i2c/devices/0-0050/at24-0/nvmem': No such file or directory ^{CODESYS Forge talk (Thread)}
[Error when Install Codesys for Beaglebone black ver4.0.0] cannot access '/sys/bus/i2c/devices/0-0050/at24-0/nvmem': No such file or directory
Last updated: 2021-11-21

Sort by relevance or date