Post by gatto on Application-based license Modbus Channels ^{CODESYS Forge talk (Post)}
Hi Sandro, did you find any solution? I'm in version 3.5.20.40 and i have only one modbus channel. I don't want the problem to happen to me if I do an update one day.
Last updated: 2025-09-01

Post by eschwellinger on CODESYS control on RPi starts, shortly runs, then exits ^{CODESYS Forge talk (Post)}
in case you are using latest hw revision, there have been added some mac adresses - for the 4.17.0.0 release this might solve it. If not we need to investigate deeper. If it is application related you need to check the plclogger.
Last updated: 2025-09-02

Post by imdatatas on The default ramp type selection in SoftMotion V4.18.0.0 is Quadratic ^{CODESYS Forge talk (Post)}
Unfortunately, The same behaviour still exist with SoftMotion V4.19.0.0 too. (default ramp type is quadratic instead trapezoid for new created axis object) For your information.
Last updated: 2025-09-04

Post by gseidel on MC_MoveAbsolute: C0138: No matching 'FB_Init' method found for instantiation of SMC_MoveAbsRelPerformerImpl [ERROR] ^{CODESYS Forge talk (Post)}
Hi Imdat, can you please provide the exact version of CODESYS and the compiler version in the project settings? Thanks, Georg
Last updated: 2025-09-08

Post by gseidel on Use MC_Home without enabling the drive for homing method 35 ^{CODESYS Forge talk (Post)}
Hi Artur, as mentioned by imdatatas, homing when not enabled is not supported in SoftMotion. If enabling before homing is not an option, an alternative might be controller based homing using MC_SetPosition. Best regards, Georg
Last updated: 2025-09-08

Post by pernockham on PHOENIX CONTACT Axioline PLCnext project in CodeSys SodftPLC ^{CODESYS Forge talk (Post)}
The structure should be the same independent of which runtime version. Im using Codesys control for linux SL. Ie, add an ethernet device, then profinet controler then phoenix PN bus coupler.
Last updated: 2025-09-09

Post by pernockham on PHOENIX CONTACT Axioline PLCnext project in CodeSys SodftPLC ^{CODESYS Forge talk (Post)}
You should use PLCnext if your device-hw is a PLCnext-un it. As I understand it you are using "CODESYS Control Win V3 x64".
Last updated: 2025-09-09

Post by ahmedbadawi10 on visualization trend recording problem ^{CODESYS Forge talk (Post)}
Hi, I'm using codesys with simulation and i'm still learning about it, when i add a trend chart to screen and do the configurations, nothing is shown on the chart! you can see conf in attached snips thanks
Last updated: 2025-09-12

Post by soundbuttonspro on Active vs Unacknowledged Alarm ^{CODESYS Forge talk (Post)}
Meme creators use it to power up their edits. Discord users love it for dropping instant reactions. Streamers lean on it for live sound effects. But what unites them all is the need for instant, sharable meme sounds—and SoundButtonsPro delivers that in the simplest way possible.
Last updated: 2025-09-16

Post by pernockham on Pointer/reference to Codesys trend recording object? ^{CODESYS Forge talk (Post)}
I have a Hmi that acts as an interface for many (mostly identical) units. This is managed by a sort of "mux" where you select which unit that should be presented on the HMI. Backbone is solved by a HMI-gvl defined as reference/pointer to "unit-data", which then can be set to the individual units. While this works for most data I still have not sorted how to solve this for the trend recordings. One solution would be to have already "mux:ed" data values as source for the/one trend. However then the trend would contain data from different units/sources which could/will cause confusion. If its possible to "clear" this can be mitigated. Possibly let the trend have its own "mux-selector" (ie, the hmi are focusing on unit#3 however trend data is locked on unit#5), that could also work.. Or, let each unit have its own trend recording, which is focused if the unit is "selected". Can I reach the trend recording objects programmatically (those defined in the device tree)? Ie, can I use a "reference/pointer to these trend recording objects"? There is a field "data source" in the trend properties dialog which seems to resemble what Im looking for? But Im not sure if I can use it in some way, I cannot change anything in this field it only says <local application="">. </local>
Last updated: 2025-09-16

Post by kurtk on How to change keyboard layout on the virtual keyboard? ^{CODESYS Forge talk (Post)}
which "demo templates" did you use and from whence did you obtain them ? I don't see anything like that in the above library
Last updated: 2025-09-17

Post by liai on can not new a cam table in codesys V3.5 SP20 ^{CODESYS Forge talk (Post)}
I am using a new project, with nothing, but when add a simple cam table, and compile, there will be errors. It seems some add-on or library was missing, but there is not any hint. Could you help, please.
Last updated: 2025-09-18

Post by flyingsheep on download project via codesys is slow but tftp/ftp/iperf is fast ?? ^{CODESYS Forge talk (Post)}
Setup description CODESYS is running on an embedded RTOS. For testing, I use a local debugging environment where my PC is connected directly to the embedded SoC via an Ethernet cable (no switch or router in between).
Last updated: 2025-09-20

Post by flyingsheep on download project via codesys is slow but tftp/ftp/iperf is fast ?? ^{CODESYS Forge talk (Post)}
CODESYS is running on an embedded RTOS. For testing, I use a local debugging environment where my PC is connected directly to the embedded SoC via an Ethernet cable (no switch or router in between).
Last updated: 2025-09-20

Post by liai on can not new a cam table in codesys V3.5 SP20 ^{CODESYS Forge talk (Post)}
Hi gseidel, Thanks a lot. My softmotion is 4.18,so the SM3_Basic version is 4.18 by default. When I change the version of SM3_Basic to 4.17,complie works good then. Thank you for your kindness.
Last updated: 2025-09-22

Post by zatalian on codesys installer 2.5.0.0 ^{CODESYS Forge talk (Post)}
Is it just me, or is the option to import a configuration file for the add-ons missing in the new version of codesys installer?
Last updated: 2025-09-24

Post by eschwellinger on Licensing info not available. ^{CODESYS Forge talk (Post)}
the procedure is usually 1. install the Licenserver (on the host) with the deploy tool in CODESYS) 2. if you go to the CODESYS WBM you should see an empty Softcontainer 130-xxxxxx 3. activate the license with SoftContainer number and ticketnumber that was it!
Last updated: 2025-10-01

Post by dogulas on numeric text box control ^{CODESYS Forge talk (Post)}
I am using TargetVisu in my v3.5 sp20 p6 (64-bit) project. I see no control that will allow me to bind, edit, and display a LREAL variable. Am I missing a library? If it exists, why can't I see it?
Last updated: 2025-10-02

Post by seif-eddine on Save a comparison of two codes ^{CODESYS Forge talk (Post)}
Hello, I have a question: how can I save a comparison of two codes in CODESYS? Is it possible to do that?
Last updated: 2025-10-10

Post by seif-eddine on Save a comparison of two codes ^{CODESYS Forge talk (Post)}
Hello, I have a question: how can I save a comparison of two codes in CODESYS? Is it possible to do that?
Last updated: 2025-10-10

Post by arrotek on Visualisation Toolbox not displaying Alarm Manager Objects ^{CODESYS Forge talk (Post)}
After upgrading to 3.5 SP19 Patch 4 I can no longer see the Alarm Manager Tab in the Visualisation Toolbox. Anyone had this error? Can anyone assist?
Last updated: 2023-12-09

Post by eschwellinger on WAGO PFC200 FW25 unable to connect ^{CODESYS Forge talk (Post)}
please double check if you have in the project the same plc type like online available. (untag the " Hide non matching device filter.."
Last updated: 2023-12-09

Post by meldawltly on Excel to Codesys 3.5 ^{CODESYS Forge talk (Post)}
Hello everyone, I have an excel file that i want to import into codesys3.5. Any idea how and what libraries can i use? To more clarify i have a table in codesys and i want to import my excel file into this table/ Thank you
Last updated: 2023-12-11

Post by meldawltly on Excel to Codesys 3.5 ^{CODESYS Forge talk (Post)}
Hello everyone, I have an excel file that i want to import into codesys3.5. Any idea how and what libraries can i use? To more clarify i have a table in codesys and i want to import my excel file into this table/ Thank you
Last updated: 2023-12-11

Post by eschwellinger on Possibility to deactivate CmpBlkDrvUdp ^{CODESYS Forge talk (Post)}
you could give this a try - just an idea, I did not try it because have no device in my hands: [CmpBlkDrvUdp] MaxInterfaces=1 itf.0.ipadress=192.168.10.1
Last updated: 2023-12-12

Sort by relevance or date