Post by mbart on VAR_INFO from inside of a FB to get info on the instance. ^{CODESYS Forge talk (Post)}
I experienced the same problem: using __VARINFO is working only in PRG context, while it crashes if used inside Function Blocks. I would really appreciate if they would fix this issue
Last updated: 2025-12-04

Post by durallymax on How to use MQTT in CODESYS Control Win V3 ^{CODESYS Forge talk (Post)}
With the IIoT library/license or the one provided by the hardware OEM. Several examples online of how to use the MQTT Client SL library.
Last updated: 2025-12-12

Post by gseidel on MC_Phasing state explenation ^{CODESYS Forge talk (Post)}
Hi kenth1973, no, we do not have this kind of information on internal variables. iPhasingState has been removed and is no longer present in current versions of SoftMotion. Best regards, Georg
Last updated: 2025-12-17

Post by kenth1973 on MC_Phasing state explenation ^{CODESYS Forge talk (Post)}
Hi George - ok thanks - but who created this FB in the first place? Could you lead me to the creator company? Is CODESYS not the old S3 that created this FB? :-)
Last updated: 2025-12-17

Post by aniket-b on Scara3 kinematic robot error ^{CODESYS Forge talk (Post)}
I am using Scara3 kinematic with EtherCAT PLC. The robot stops at the same place randomly after few cycles. Check attached image. I am getting SMC_ERROR.SMC_DI_FIELDBUS_LOST_SYNCRONICITY in all 3 axes.
Last updated: 2025-12-19

Post by mawaloc on KeyPad Function in Visualization to fill a table ^{CODESYS Forge talk (Post)}
THANK you !!! I finally find ou... may be not with same thing " use template" , so will looks your way of doing, maybe it's more properly done anyhow thank you
Last updated: 2026-01-08

Post by charly29160 on CmpCharDevice blocks gpiochip access on Raspberry Pi 5 since update from SP18 to SP21 ^{CODESYS Forge talk (Post)}
Problem gefunden und erledigt => in CODESYSControl_User.cfg ergänzt: [CmpCharDevice] PermittedPath.0=/dev/i2c PermittedPath.1=/dev/spidev PermittedPath.2=/sys/class/gpio/ PermittedPath.3=/dev/gpiochip Dann funktioniert es wieder Gruß Karl Schuler
Last updated: 2026-07-20

Post by nixola on CmpCharDevice blocks gpiochip access on Raspberry Pi 5 since update from SP18 to SP21 ^{CODESYS Forge talk (Post)}
Hi, I added the following lines to /etc/codesyscontrol/CODESYSControl_User.cfg: [CmpCharDevice] PermittedPath.0=/dev/i2c* PermittedPath.1=/dev/spidev* PermittedPath.2=/sys/class/gpio/* PermittedPath.3=/dev/gpiochip* However, I'm still unable to read or control GPIO pins from any CODESYS application. Specifically, setting the pin direction (and, thus, the IoDrvGpioSysfs driver configuration) fails, with a rather non-descript error in the logs: Description Component Setting direction failed for GPIO pin 586 IEC Update configuration failed from driver IoDrvGPIOSysfs CmpIoMgr I'm running CODESYS Control for Linux ARM64 SL version 4.21.0.0; it's running in rootless mode, as the codesyscontrol user, but said user is in the gpio group and can otherwise normally interact with GPIO, both via gpioset/gpioget and via the sysfs driver in /sys/class/gpio/. The system is a custom 64-bit Raspberry OS based distro, running on a Raspberry Pi CM5 on kernel 6.18.34 with PREEMPT_RT scheduling.
Last updated: 2026-07-21

Post by clockben on Python script to add libraries to project ^{CODESYS Forge talk (Post)}
Hello, I have the same issue — some libraries aren’t resolved. When I load the libraries manually and delete them, reloading with the script works fine afterward. Have you found a solution since then? Many thanks in advance
Last updated: 2025-11-11

Post by grepoo on DataSource CodesysApp V3 ^{CODESYS Forge talk (Post)}
Hi, trying to create a datasource in appV3 but it returns error code 259 (not nearer specified) everytime, no matter the device i am using. Any idea of what it might signify ?
Last updated: 2025-11-19

Post by ggaida on runtime dynamic modbus devices ^{CODESYS Forge talk (Post)}
Kurtk, I am working through a very similar scenario. I am curious if you have had any success since your post in implementing dynamic modbus configurations? Thx!
Last updated: 2025-11-20

Post by ggaida on runtime dynamic modbus devices ^{CODESYS Forge talk (Post)}
Kurtk, I am working through a very similar scenario. I am curious if you have had any success since your post in implementing dynamic modbus configurations? Thx!
Last updated: 2025-11-20

Post by danamocca on SM3_CNC Sentence modifier ^{CODESYS Forge talk (Post)}
Hi! Does anyone have an example of ReadNCFile2 with Sentence Modifier? Current examples on CODESYS help page are outdated and have a lot of errors, like "SMC_CNC_LibParams.MAX_SUBPROGRAM_NESTING_DEPTH" calls, which are not present in current version of SMC3_CNC library.
Last updated: 2025-12-25

Post by karsonsv on CODESYS HMI and 2 monitors ^{CODESYS Forge talk (Post)}
I need open visualization on two monitors (every monitor 19201080). In TargetVisu i configure Scaling Options as Fixed 38401080. But visualization open onli main monitor and onli half.
Last updated: 2026-01-02

Post by osande on Archive ^{CODESYS Forge talk (Post)}
Problem with Visualization Manager and archiving. Project without VM has no problem. With VM in the project there is an error message and no archive has been created
Last updated: 2026-03-10

Post by mtorell on Safe Editor in codesys v3.5sp21p30 ^{CODESYS Forge talk (Post)}
How do I negate an output signal from an OR gate. I have tried right click to no avail and I cannot find an propriate NEGATE box? I want to save the output from the block to an inverted variable.
Last updated: 2026-03-12

Post by reinier-geers on Draw nails pattern ^{CODESYS Forge talk (Post)}
Hi I want to draw a nailpattern. But codesys Hasnt a draw command. And i dont want to draw 1000 nails and move them in position. Any one an idee ?
Last updated: 2026-04-20

Post by meke001 on Visualisierungswerkzeuge ^{CODESYS Forge talk (Post)}
Hallo zusammen, ich habe ein hartnäckiges Problem mit der CODESYS-Visualisierung und hoffe auf eure Expertise. In meinem Projekt wird die Toolbox ("Werkzeuge") für die Visualisierung komplett leer angezeigt, es lassen sich also keine Basis-Elemente wie Rechtecke oder Kreise in die Zeichenfläche ziehen. Mein System: CODESYS V3.5 SP22 Patch 2 (64-bit) Device / Compiler-Version: 3.5.22.20 Das Kuriose:Das eigentliche Projekt läuft absolut einwandfrei. Mein Programmcode lässt sich ohne Probleme übersetzen, die SPS-Logik funktioniert fehlerfrei und auch die Simulation läuft einwandfrei durch. Nur das "Gesicht" des Projekts fehlt. Zwischendurch tauchte in den Meldungen der Fehler auf: Die Bibliothek '#System_VisuElems' konnte nicht aufgelöst werden. Was ich bereits zur Fehlerbehebung versucht habe: Installer-Check: Im CODESYS Installer geprüft, ob das Add-on "CODESYS Visualization" installiert ist (ist vorhanden und aktiv). Profil erzwungen: Im Visualisierungsmanager das Visualisierungsprofil manuell auf die aktuellste Version gesetzt. Gerät aktualisiert: Das Device im Projektbaum per Rechtsklick sauber auf die Version 3.5.22.20 hochgezogen. Clean Build: Mehrfach "Alles bereinigen" ausgeführt und neu übersetzt. Neues Projekt: Selbst wenn ich ein komplett neues Standardprojekt anlege, fehlen die Werkzeuge in der Visualisierung weiterhin. Hat jemand von euch eine Idee, woran das noch liegen könnte? Gibt es unter Windows eventuell einen versteckten Cache-Ordner für die Visualisierungs-Bibliotheken, den man manuell leeren muss? Für jeden Tipp wäre ich sehr dankbar! Viele Grüße
Last updated: 2026-06-15

Post by jeffyech on <Dereference of invalid pointer> ^{CODESYS Forge talk (Post)}
I have a program which calls a structure. while online with the PLC, I get: <dereference of="" invalid="" pointer=""> in the declaration values area. What are the causes of this? Can it be solved?</dereference> Version 3.5 of codesys.
Last updated: 2026-06-25

Post by blade on Visualization Object missing from drop-down list... ^{CODESYS Forge talk (Post)}
Hi, For some reason, the Visualisation object is missing from the drop-down list (see the attachment). Does anyone know why it''s missing and how I can fix the problem? Thanks in advance
Last updated: 2026-07-01

Post by gseidel on Limit Axis CNC Jerk using SMC_Polynomial_AbsMaxLocs ^{CODESYS Forge talk (Post)}
Interesting. In the SMC_LimitDynamics case, do you reduce the maximum velocity of the SMC_GeoInfo based on the third derivative of the spline?
Last updated: 2026-07-09

Post by eschwellinger on Beckhoff CX9240 : Using Internal EtherCAT Bus ^{CODESYS Forge talk (Post)}
yes, you need to install Control RTE CX. In that package there is the Internal EthercatMaster / EthercatMasterSoftmotion which you could add then.
Last updated: 2026-07-10

Post by amira on Visu 4.9.1 auto-logon/login ^{CODESYS Forge talk (Post)}
Hello Julian, could you please check in Chrome Password Manager Settings if the option "Offer to save passwords" is set? With this option selected, a pop-up message will then show up asking whether or not to save the password. Choose OK. Hope this helps.
Last updated: 2026-01-14

Post by reinier-geers on Error ambigiusname ^{CODESYS Forge talk (Post)}
In visu i have a Led. I only changed the output. Then i get Ambigius use of name Tpara. But it doesnt show where. See screen shot
Last updated: 2026-01-20

Post by gseidel on SMC_Trafo 6DOF Config Error ^{CODESYS Forge talk (Post)}
Hi jgalaska, the parameters and their valid ranges are described here (0). In particular, the parameter d1 must be non-positive (<= 0). (0) https://content.helpme-codesys.com/en/CODESYS%20SoftMotion/_sm_trafo_pou_six_dof_robot.html#UUID-5451338b-a728-5c42-0f62-d9735b01d032_id_b18ea4b1b308acfdc0a8646358edc019_id_e7016982df408f59c0a8657d017550b3 Best regards, Georg
Last updated: 2026-01-21

Sort by relevance or date