Post by jeroenaero on CodeSys Raspberry pi I2C driver not found ^{CODESYS Forge talk (Post)}
I succeed to change the device to PI_SL but still the same problem of the I2C device switching between running and not running. the only difference with your project is that yo use I2C_master device version 4.7.0 and i 4.7.13, for GPIO i also use the 4.7.13 version and you the 4.7.0. Can you send me the older version of the Raspberry PI pheripals library, because i cannot choose lower version then 4.7.10 for the GPIO and I2C_master device
Last updated: 2024-11-11

Post by ojz0r on INT_TO_WORD function not working ^{CODESYS Forge talk (Post)}
That calculation will not work the way you expect it to. If PumpFillSpeed is limitied to 0-50 then the only whole number would be 50/50 = 1 everything else is 0.0-0.9999... and since you are using word and integer only 50 would work since there is no representation for mantissa in integer values. Declare a temporary real variable and do the calculation and then do a REAL_TO_WORD in the DRV2Speed assignment.
Last updated: 2024-01-26

Post by yofi on Raspberry Pi 4 POU not running ^{CODESYS Forge talk (Post)}
I have this error where the pou doesn't run even for simple programs like contact and a coil if i remove the pou from the task and put another one it works for one run then it stops working again in the photo we can see a contact is on but the coil connected to it is still not on and the device is in run mode I had this issue again and again any help
Last updated: 2024-06-02

Post by yofi on Raspberry Pi 4 POU not running ^{CODESYS Forge talk (Post)}
I have this error where the pou doesn't run even for simple programs like contact and a coil if i remove the pou from the task and put another one it works for one run then it stops working again in the photo we can see a contact is on but the coil connected to it is still not on and the device is in run mode I had this issue again and again any help
Last updated: 2024-06-02

Post by andrax on Save Recipe on Paspberry ^{CODESYS Forge talk (Post)}
Unfortunately not. The folder does not work. There are neither error messages nor any other indication that this may be due to missing rights. I have searched the entire forum and also tested the Codesys example. The simple recipe management generally does not work! The Raspi crashes with the extended recipe management from the example. I have now found another sample that works. https://forge.codesys.com/forge/talk/Engineering/thread/61c6a04b79/ Many thanks to mcodem. After some trial and error I have found out: xcreate must be called at least once at runtime. After that xload_write and xread_save work All other functions do not work. It is also possible to save to the /home/Documents folder. So it is not due to the rights. It would be nice if Codesys would check where the problem really lies.
Last updated: 2023-12-30

Post by eschwellinger on The required device description is not installed.. ^{CODESYS Forge talk (Post)}
just rightclick to the second J1939 device in the devicetree and 'update device'
Last updated: 2023-10-03

Post by eschwellinger on USB <-> CAN, CANfox, Component CmpCANFoxDrv NOT loaded ^{CODESYS Forge talk (Post)}
means - with 3.5.19.x CODESYS Version - CANFox should work with 32Bit and 64Bit version
Last updated: 2023-10-16

Post by smartcoco on Visualization using methods and cyclic ST-calls ^{CODESYS Forge talk (Post)}
I think what you want is a declaration period function for the page, but unfortunately CODESYS does not have it.
Last updated: 2023-10-17

Post by chiali on Recipe issue. ^{CODESYS Forge talk (Post)}
Hello; Why the same project is working under older versions, like V3.5.14.0, and not in latest version(s). Is it a bug??? Best regards.
Last updated: 2023-10-26

Post by baldeep on Raspberry Pi 5 ^{CODESYS Forge talk (Post)}
Raspberry 5 4GB & 8GB Runtime 4.10.0.0 32 Bit Raspbian Bookworm and tried 64 Bit too...Codesys is not runnung!
Last updated: 2023-12-06

Post by pietrobalint on Persistent variables are not read after initialization ^{CODESYS Forge talk (Post)}
I updated to 4.13.0.0 and now it works. Thank you!
Last updated: 2024-09-04

Post by thysonfury on OPTO22 Groov Epic PR2 Modbus Comms Dropping out every 2 hours and 4 Mins ^{CODESYS Forge talk (Post)}
OPTO22 Codesys Activation license not active.
Last updated: 2024-09-11

Post by wbj0t on tool 'update raspberry pi' unavailable ^{CODESYS Forge talk (Post)}
I also tried install Linux SL and ARM/Linux SL. Same problem: not available in tools...
Last updated: 2024-09-26

Post by athuum on Error 'Library not found' and 'Unkown type' ^{CODESYS Forge talk (Post)}
I have found the solution, the CmpEventMgr version has to correspond with the 3sLicense version.
Last updated: 2024-10-10

Post by andrax on CodeSys Raspberry pi I2C driver not found ^{CODESYS Forge talk (Post)}
I took a look at the xml Is this even the right driver and where did you get it?
Last updated: 2024-11-07

Post by bertcom on STRING conversions to DWORD ^{CODESYS Forge talk (Post)}
@trusty-suire, The problem is not encoding. The problem is that codesys ands ' ' to the string. And the printer can't handle these character.
Last updated: 2025-01-30

Post by bertcom on STRING conversions to DWORD ^{CODESYS Forge talk (Post)}
@trusty-suire, The problem is not encoding. The problem is that codesys ands ' ' to the string. And the printer can't handle these character.
Last updated: 2025-01-30

Post by mubeta on Profibus DP master with EL6731 and automatic restart of slaves ^{CODESYS Forge talk (Post)}
Not connected, but found using: Scan for Devices
Last updated: 2025-02-03

Post by pernockham on Slider instance value when accessed through "execute ST-code" ^{CODESYS Forge talk (Post)}
I think this will not work. I reworked and used an int as source instead.
Last updated: 2025-02-07

Post by lookingforhelp on CODESYS v3.5 SP18 ^{CODESYS Forge talk (Post)}
I am so sorry this topic was posted twice and the subject is not completely. It should named like "CODESYS v3.5 SP18 - Missing Action".
Last updated: 2025-04-17

Post by franknator on RaspberryPi 5 gateway problem ^{CODESYS Forge talk (Post)}
DO NOT use the same username and password in Codesys as your default Rpi OS admin user on the Pi.
Last updated: 2025-06-18

Post by eschwellinger on Gateway in China - "Gateway not connected" ^{CODESYS Forge talk (Post)}
We have tested this and it had worked at that time with China. which device is it? Anything special?
Last updated: 2025-09-23

Post by eschwellinger on Eoe issues with Windows and Linux ^{CODESYS Forge talk (Post)}
I think it must be tap0 for EOE https://faq.codesys.com/pages/viewpage.action?pageId=146178174 otherwise it will not work
Last updated: 2023-12-20

Post by dkugler on Toggling Visualizations using HMI Physical Buttons ^{CODESYS Forge talk (Post)}
post a screenshot of the ladder and the error message. I'm not able to have a lock at your monitor actually :-)
Last updated: 2024-02-13

Post by ademarvribeiro on Could not be resolved - Library error ^{CODESYS Forge talk (Post)}
Hello. Did you try delet this library and rebuild the Project?
Last updated: 2024-04-12

Sort by relevance or date