Post by taqamert on Codesys 2.3 & Peak PCAN ^{CODESYS Forge talk (Post)}
I will use Codesys to program a PLC. I will connect the PLC to the computer via the CAN interface using PEAK CAN, but Codesys does not recognize the CAN adapter. I have added the following libraries. What should I do? What steps should I follow?
Last updated: 2024-07-03

Post by joelwright24 on codesys sp20 opcua not working ^{CODESYS Forge talk (Post)}
I also had this problem connected CODESYS to UAExpert for the first time. In the device, I need to allow anonyomous log in. Follow steps 14 - 17 of the following tutorial: https://docs.factoryio.com/tutorials/codesys/setting-up/codesys-opc-ua-sp17/#creating-the-project
Last updated: 2024-09-11

Post by bernardchen on Modbustcp.lib missing codesys v2.3 ^{CODESYS Forge talk (Post)}
a codesys project V2.3.9 opened with error of libuary missing. Modbustcp.lib and Modbustcpsrv.lib where can I download these two libs . I am a beginner of codesys. this codesys v2.3 is running in virtualbox XP system without internet access.
Last updated: 2025-03-12

Post by timvh on Codesys Control for PLCnext (PLC - AXL F 2152) ^{CODESYS Forge talk (Post)}
Do not filter on Phoenix devices. First add an Ethernet device (from CODESYS). Then add a Profinet Controller (from CODESYS). Then add your Phoenix devices to this CODESYS Profinet Controller.
Last updated: 2025-09-09

Post by davidbo on Does CODESYS use its own native driver for I2c? ^{CODESYS Forge talk (Post)}
CODESYS Control for Raspberry Pi MC Does CODESYS use its own native driver for I2c? I have a python script communicating with a device simultaneously with a CODESYS doing the same. The bus is not saturated. But I get many read errors
Last updated: 2024-02-13

Post by simonep on new version of CODESYS have problem to load GSDML files ^{CODESYS Forge talk (Post)}
I have update codesys today but now i can't install my GSDML files, until Friday I was always able to load without any problem, now it gives me this error. Codesys version V3.5 SP19 Patch 1 + (64 bit)
Last updated: 2024-05-20

Post by ranadheer on conformation about the CODESYS Extends SL and CODESYS SDK ^{CODESYS Forge talk (Post)}
hello everyone would anyone here respond, Is CODESYS Extends SL and CODESYS SDK are same. If both are not same could you please give related data about this. Best Regards Ranadheer
Last updated: 2025-11-10

Post by solidlogicguy on Little endian to Float from Modbus RTU ^{CODESYS Forge talk (Post)}
Hello, I got a device from which I require to read values from I am using a WAGO PLC 750-8212 and I am communicating through Modbus Master FUNCTION BLOCK from library WagoAppPLCModbus in Codesys 3.5 to this device. I already receive data from the device that is a CVM to monitor voltage from a fuel cell. The technical support of the company that makes these devices says that the data is sent in little endian form. And I want to convert it to a float value. The tech support sent me the next instructions of how to do it but I am new using codesys, so any advice or help I will really appreciate so much. Message from tech support: The process is complicated, better to do it with already implemented library in the language/program you use. Basically the process should be next: To convert the two Modbus registers containing parts of a 32-bit float in little-endian byte order to a floating-point number using mathematical operations, you first need to combine the two 16-bit integers (assuming reg1 is the lower word and reg2 is the higher word) and then interpret the result according to the IEEE 754 standard. Given: - Register 192 (reg1) = 4096 - Register 193 (reg2) = 14884 Step 1: Combine the two registers. Since we are dealing with little-endian byte order, reg2 is the high word, and reg1 is the low word: combined = reg2 * 2^16 + reg1 combined = 14884 * 65536 + 4096 combined = 975175680 + 4096 combined = 975179776 Step 2: Convert the combined value to binary: combined_binary = '1110101101011100000000000000000' Step 3: Split the binary into IEEE 754 components: Sign bit (1 bit): 0 Exponent (8 bits): 11101011 Mantissa (23 bits): 01011100000000000000000 Step 4: Convert the binary exponent to decimal and subtract the bias (127 for 32-bit floats): exponent = int('11101011', 2) - 127 exponent = 235 - 127 exponent = 108 Step 5: Calculate the mantissa as a fraction: The mantissa in IEEE 754 format is the fractional part after the leading 1 (which is implicit). Therefore, we need to convert the binary mantissa to decimal and add the implicit leading 1: mantissa_fractional = 1 + int('01011100000000000000000', 2) / 2^23 mantissa_fractional = 1 + 18688 / 8388608 mantissa_fractional = 1 + 0.002227783203125 mantissa_fractional ≈ 1.002227783203125 Step 6: Combine the sign, exponent, and mantissa to get the float value: float_value = (-1)^0 * mantissa_fractional * 2^exponent float_value = 1 * 1.002227783203125 * 2^108 Because the exponent is quite large, the resulting float value is a very large number.
Last updated: 2023-12-15

Edgelogix-rpi-1000-cm4102032 SPI port connection to PiFace I/O Driver in CodeSys. ^{CODESYS Forge talk (Thread)}
Edgelogix-rpi-1000-cm4102032 SPI port connection to PiFace I/O Driver in CodeSys.
Last updated: 2023-08-21

Post by wagnerkuapiz on Codesys - Como Resetar a senha do Codesys ControlWin ^{CODESYS Forge talk (Post)}
Next Video: Solution https://www.youtube.com/watch?v=7dryc7CT7vI
Last updated: 2023-08-21

Post by damian177 on PFC 200 - codesys V3.5 ^{CODESYS Forge talk (Post)}
Hi, Is it possible read all project from Codesys PFC200 ? I know only IP addres, nothing more
Last updated: 2023-08-25

CODESYS V35SP12 does not save data setting with rapsberry after reboot ^{CODESYS Forge talk (Thread)}
CODESYS V35SP12 does not save data setting with rapsberry after reboot
Last updated: 2018-04-17

What is the best way to upgrade a project to a new version of Codesys? ^{CODESYS Forge talk (Thread)}
What is the best way to upgrade a project to a new version of Codesys?
Last updated: 2022-03-01

Strange: CodeSys outbound/send messages seen by hardware but not by SocketCAN (inbound/read is OK) ^{CODESYS Forge talk (Thread)}
Strange: CodeSys outbound/send messages seen by hardware but not by SocketCAN (inbound/read is OK)
Last updated: 2020-09-29

Post by fleaplc on FILE_OPERATION_DENIED ^{CODESYS Forge talk (Post)}
/var/opt/codesys/PlcLogic not work here, again FILE_OPERATION_DENIED. May I simply moved my files in /var/opt/codesys/PlcLogic or need some particular settings?
Last updated: 2023-09-30

Post by ronald-de-jonge on Codesys StructType in Device Description File ^{CODESYS Forge talk (Post)}
We have the same issue when using CODESYS V3.5 SP18 Patch 2. Is there a solution for this issue?
Last updated: 2023-10-30

Post by pflot59 on Migration von "CODESYS Control for PFC200 SL" zu WAGO FW26 "CODESYS V3.5.19.2" ^{CODESYS Forge talk (Post)}
You can find a guide here : https://techdocs.wago.com/Software/eCOCKPIT_Migration/en-US/index.html
Last updated: 2023-11-21

Codesys 3.5.19 Control Win x64 - network adapter for EtherCAT master not working ^{CODESYS Forge talk (Thread)}
Codesys 3.5.19 Control Win x64 - network adapter for EtherCAT master not working
Last updated: 2023-11-22

Post by pflot59 on Migration von "CODESYS Control for PFC200 SL" zu WAGO FW26 "CODESYS V3.5.19.2" ^{CODESYS Forge talk (Post)}
You can find a guide here : https://techdocs.wago.com/Software/eCOCKPIT_Migration/en-US/index.html
Last updated: 2023-11-21

Codesys Communication Manger - Required information model version exists in the model repository but is not found ^{CODESYS Forge talk (Thread)}
Codesys Communication Manger - Required information model version exists in the model repository but is not found
Last updated: 2024-06-28

Cannot Save CSV File on Windows Computer Using CODESYS and Control Win ^{CODESYS Forge talk (Thread)}
Cannot Save CSV File on Windows Computer Using CODESYS and Control Win
Last updated: 2024-07-04

Post by bamir on Codesys Visualisation HMI ^{CODESYS Forge talk (Post)}
Which is the best HMI to display the codesys visualisation. I have my program in exor PLC
Last updated: 2024-07-06

Post by bamir on Codesys Visualisation HMI ^{CODESYS Forge talk (Post)}
Which is the best HMI to display the codesys visualisation. I have my program in exor PLC
Last updated: 2024-07-06

Post by eschwellinger on TargetVisu on Raspberry? ^{CODESYS Forge talk (Post)}
install this: https://store.codesys.com/de/codesys-targetvisu-for-linux.html via CODESYS Installer and deploy it by update command
Last updated: 2024-07-26

Raspberry Pi 4 B HW 1.5 Codesys control 4.10.0 stopps after a few seconds ^{CODESYS Forge talk (Thread)}
Raspberry Pi 4 B HW 1.5 Codesys control 4.10.0 stopps after a few seconds
Last updated: 2024-07-29

Sort by relevance or date