Post by davidbo on Modbus: Is there a way to get the channel index from the channel name? ^{CODESYS Forge talk (Post)}
When I use the FUNCTION_BLOCK ModbusChannel I have to sepcify the integer iChannelIndex It can easily go wrong if one has many channels. It would be better if one could use the name. Is that possible? Attached a snippet of the channel name and the channel index to the left.
Last updated: 2024-10-21

Post by eschwellinger on RS485 CAN HAT to Cosesys ^{CODESYS Forge talk (Post)}
Hi if you add in (ttyAMA0 should fit to your HAT's device [SysCom] Linux.Devicefile.1=/dev/ttyAMA0 to /etc/CODESYSControl_Usr.cfg since 4.12.0.0 version /etc/codesyscontrol/CODESYSControl_Usr.cfg then access in CODESYS with Com1 should do it. Keep in mind that only adapters work (for RS485) which do determine the send/receive direction in hardware
Last updated: 2024-10-28

Post by yannickasselin on MQTT QoS 1 & 2 ^{CODESYS Forge talk (Post)}
Hello, After some more tests, here is what I found out. It seems we have to increase the uiKeepAlive and tPingInterval parameters. If I increase the uiKeepAlive value to 60s and the tPingInterval to 30s, then if I disconnect the ethernet cable from Codesys and publish some messages to which Codesys subscribes to and then reconnect within 30s, I will get the messages. If I don't reconnect the cable within 30s (ping interval), the client goes in error with "ACKNOWLEDGE_TIMEOUT". When this happens, it will not automatically reconnect after reconnecting the cable. I have to disable and re-enable the client but I will not get the published messages. I need to do more tests because there are a lot of weird things happening when playing with the ping interval and the keep alive. It is not clear to me what does what. I even ended up not receiving messages anymore, even if I disabled and re-enabled the mqtt client. The client did not give any error. The only way I was able to get messages again was by modifying my client ID. After that, if I try to re-use one of the old client IDs, nothing works (publish, subscribe) and I get a TCP_INIT_ERROR and sometimes a TCP_READ_ERROR. I need more explanation/documentation about these weird behaviors. Maybe it is the way I use it, maybe it is related to the broker (I am using Mosquitto with default parameters). When using a Node-Red client, everything works perfectly. I am trying to achieve the same behavior with Codesys but it seems impossible so far.
Last updated: 2024-10-30

Post by jddaigle on Webvisu not supported due to missing browser feature HTML5-Canvas ^{CODESYS Forge talk (Post)}
Hello, I'm running the lastest version of Codesys 3.5 SP20 Patch 5, with the lastest version of Chrome. And I still get this "Webvisu not supported due to missing browser feature HTML5-Canvas" fallback with a quite simple webvisu containing some buttons, images, textboxed and a grid. What can I do? is that a configuration to change? Thanks!
Last updated: 2025-01-24

Post by timvh on TargetVisu started in windowed or not full screen ^{CODESYS Forge talk (Post)}
In your soft plc folder, there is a file called targetvisuextern.cfg. Open this with a text editor to change the settings. Remove the semi-colons in front of the lines to enable your custom window settings. WindowType=0 means you will get a moveable window. Save the file and restart the soft PLC to enable these settings.
Last updated: 2025-02-26

Post by hassaank on CODESYS V3+ WAGO PFC200+ MODBUS RTU ^{CODESYS Forge talk (Post)}
Hi everyone, I’m new to CODESYS and Wago devices, and I’m trying to set up Modbus RTU communication. I have a Wago PFC200 (8110) and a 750-653 RS485 module, and I want to read data from an energy meter using Modbus RTU. Thanks in advance for your help!
Last updated: 2025-03-17

Post by kevinm on Programmatically change Tappet on a cam ^{CODESYS Forge talk (Post)}
I am considering using a SoftMotion cam and tappets to activate functions on a machine - for example, triggering a pneumatic valve. I need the ability to change the actuation point (tappet "X" location) from the HMI during machine commissioning. Is there a way to change the "X" value of a tappet programmatically?
Last updated: 2025-04-01

Post by manuknecht on FileDialog - OnDialogClosed not called anymore ^{CODESYS Forge talk (Post)}
I had similar issues with the OnDialogClosed not being called. I realized that this behaviour is resolved, when the according visualization object on which the input configuration is set is moved to the foreground. Somehow, the object has to be one of the lowest elements in the Element List (i.e. in the foreground) for it to work.
Last updated: 2025-04-25

Post by bjohnson on Failed to instantiate the frame window error ^{CODESYS Forge talk (Post)}
IT updated a group policy that caused this issue. We resolved by going to Local Group Policy Editor > Local Computer Policy > Computer Configuration > Windows Settings> Security Settings > Local Policies > Security Options. Set "System Cryptography: Use FIPS compliant algorithms for encryption, hashing, and signing" to DISABLED
Last updated: 2025-05-23

Post by bjohnson on CODESYS and Win10 - "the version profile is not valid" error ^{CODESYS Forge talk (Post)}
We just had this problem today when our IT updated a group policy. You need to go to Local Group Policy Editor > Local Computer Policy > Computer Configuration > Windows Settings> Security Settings > Local Policies > Security Options. Set "System Cryptography: Use FIPS compliant algorithms for encryption, hashing, and signing" to DISABLED
Last updated: 2025-05-23

Post by bjohnson on CODESYS and Win10 - "the version profile is not valid" error ^{CODESYS Forge talk (Post)}
We just had this problem today when our IT updated a group policy. You need to to got Local Group Policy Editor > Local Computer Policy > Computer Configuration > Windows Settings> Security Settings > Local Policies > Security Options. Set "System Cryptography: Use FIPS compliant algorithms for encryption, hashing, and signing" to DISABLED
Last updated: 2025-05-23

Post by andrewb on Codesys Visu Update Frame Parameters No Dialog Appears to update ^{CODESYS Forge talk (Post)}
I'm also seeing this issue, my instances of the frame will date but not for new parameters that I add to it. Has anyone seen a fix or a way to force the parameter update other than recreating all the frame instances?
Last updated: 2025-06-06

Post by timvh on Reading multiple lines from csv file ^{CODESYS Forge talk (Post)}
Not sure, but maybe before you enter step 5, set i, lineindex and charIndex to 0. And the buffer variable should have a size bigger than 1 line. Additionally I think you should set bufferstart to 0 before you enter step 5. And in the OSCAT function you always point to the buffer address, but shouldn't this be (buffer + bufferstart)?
Last updated: 2025-07-23

Post by aufwindsh on Visualization Scaling the Keypad ^{CODESYS Forge talk (Post)}
Hello everyone, is there an option to change the Scaling of the Keypad? I have an 15inch HMI with a resolution of 1920x1080p and the Keypad for the Login of the usermanagement is still to smals to have a great user Experiance. I really appriciate any feedback. Thanks.
Last updated: 2025-08-02

Post by eschwellinger on Codesys Virtual control SL ^{CODESYS Forge talk (Post)}
Hi, which CODESYS Version are you using exactly? Either update to 3.5.21.x if you are on 3.5.20.x if not - add a more secure pw. Seems that on adding the login credentials it is mandatory in 4.16.0.0 -to have complianct to password policy seems a bug that the message not occure.
Last updated: 2025-08-06

Post by timvh on Current Visu name without Current Visu Variable ^{CODESYS Forge talk (Post)}
To change the current visualization for (all) webclients: Add the library “Visu Utils” and use the following example code: VAR xChangeVisu: BOOL; fbChangeVisu : VU.FbChangeVisu; END_VAR // Change to Visu2 when setting xChangeVisu to TRUE fbChangeVisu( xExecute:= xChangeVisu, xDone=> , xBusy=> , xError=> , itfClientFilter:= VU.Globals.OnlyWebVisu, //itfFilter, eError=> , sVisuName:= 'Visu2'); IF fbChangeVisu.xDone OR fbChangeVisu.xError THEN xChangeVisu := FALSE; END_IF
Last updated: 2025-08-13

Post by davemansell on explicit cast ENUM to UINT and vice versa ^{CODESYS Forge talk (Post)}
This is from sometime ago but below might help someone else; this could be done via POINTERS. Make sure you protect for NULL pointers etc if you take this approach. // DECLARATION myEnumValue : enumMyEnum; u8 : USINT; pmyEnumValue : POINTER TO enumMyEnum; pu8 : POINTER TO USINT; // CODE pu8 := ADR(u8); pmyEnumValue := pu8; myEnumValue := pmyEnumValue^; // dereference the pointer
Last updated: 2025-08-21

Post by davemansell on explicit cast ENUM to UINT and vice versa ^{CODESYS Forge talk (Post)}
This is from sometime ago but below might help you could do this via POINTERS. Make sure you protect for NULL pointers etc if you take this approach. // DECLARATION myEnumValue : enumMyEnum; u8 : USINT; pmyEnumValue : POINTER TO enumMyEnum; pu8 : POINTER TO USINT; // CODE pmyEnumValue := pu8; myEnumValue := pmyEnumValue^; // dereference the pointer
Last updated: 2025-08-21

Post by eschwellinger on TargetVisu option missing in IDE ^{CODESYS Forge talk (Post)}
It is not needed to add Targetvisu connector - for using the TargetVisu for Linux. The reason is - TargetVisu for Linux is basically a remote TargetVisu which could connect to any CODESYS plc not only the loacal one - therefore only a Webvisu connector is needed to have it work. & it seems a bug with this anoying update proposal.
Last updated: 2025-08-23

Post by gseidel on Dynamic target position tracking ^{CODESYS Forge talk (Post)}
Hi kporter, a more direct way would be to use SMC_FollowPosition to write the set positions directly to the servo drive. This FB has reacts on changes of the fSetPosition on each call, without a need for a rising edge on Execute. See https://content.helpme-codesys.com/en/libs/SM3_Basic/Current/SM3_Basic/POUs/Movement/Direct/SMC_FollowPosition.html. Best regards, Georg
Last updated: 2025-09-08

Post by jzhvymetal77 on Special Chars in Visualizationfor QR code string ^{CODESYS Forge talk (Post)}
Ok, I got UTF-8 encoding working by encoding the full block character using [16#E2, 16#96, 16#88], which corresponds to U+2588 "█". Moving forward, I’ll use this for creating a QR code with Version 10-M (byte mode). This version allows up to 213 characters to be encoded.
Last updated: 2025-10-04

Post by zatalian on Codesys Control for Raspberry Pi 4.10.0.0 - Raspberry Pi OS > 2023-12-05 ^{CODESYS Forge talk (Post)}
I tried both 3B en 4. But every time with a lite version. I didn't try the full version of raspberry pi os. Nice to hear you are aware of the problem and trying to fix it. I'll hold on to the image from 2023-10-10 for now.
Last updated: 2023-12-12

Post by lgeertsema on Checkbox font color in visualization style ^{CODESYS Forge talk (Post)}
Hello, I'm having a similar issue with buttons. I want to be able to set the default color and transparency of a button. I've tried a lot of different iterations like KNewman, but to no avail. Has there been some documentation released since KNewman posted this, or is the style editor still as undocumented as ever?
Last updated: 2024-01-11

Post by scarter on Bit / Bool data types in function parameters ^{CODESYS Forge talk (Post)}
Any reason BIT and BOOL data types are not interchangeable? Trying to make a function which takes a BOOL IN/OUT parameter (Not allowed to use BIT) In the main logic if I make a DINT variable, and want to use each bit on different functions CODESYS will not allow it.
Last updated: 2024-01-17

Post by kevin123 on MessageKey for missing library dialog ^{CODESYS Forge talk (Post)}
Hi Martin, I got the messagekey of the "upgrade format warning dialog" with key:"<< No Key>>". (please refer to the attachment) Is that means i can't use system.prompt_answers["<<No Key>>"] = PromptResult.OK; to auto-answer 'OK' in this dialog? Is there any other way to auto-answer this dialog? Thanks!
Last updated: 2024-01-26

Sort by relevance or date